Best 2020 Jeep Wrangler Flat Tow Brake Systems

Absolutely great product and worth the time and effort to install. Once installed and "adjusted correctly" this unit is flawless. I installed it with everything else from ETrailer in 3 days, taking my time and I have a very clean installation. Once installed the tech support guided my "sensitivity" level for the perfect application. Also their TECH support was on it both times I called. The other was in ref to a brake light switch sold by etrailer but was not needed for this and they provided the intel off the top of his head. Absolutely recommend this product and both DUO and Etrailer as companies.

great kit for installing a supplemental braking system in my 2019 jeep wrangler. It takes several hours to install, but if you follow the instructions and watch the video, it's a pretty straight forward install. Just think it through and plan where you'll route the wiring and hoses. The hardest part was being flexable enough to mount the hardware to the firewall behind the brake pedal, but that's not a fault of the system.

I have a 2016 Jeep Wrangler Sport Unlimited 4 door, after I installed the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles - HM56200, I found I had to install the Road-Master Brake Lite Relay for Towed Vehicles - RM-88400 , I'm using a supplemental brake system, when the brake is depressed with ignition off, the brake lights come on and cancel out any directional signal on my toad, installing the relay solved this problem. I watched the video and this was helpful. Installation took me a few hours, climbing under the dash was not an easy chore for me, I'm not as young as I want to be, had to purchase 16 gauge Red wire to run to Fuse box under the hood, also I recommend having extra wire ties to do this. I recommend both products, easy to install and good quality.

I use the Blue Ox Patriot II supplemental braking system in my Jeep Wrangler Unlimited; so, it override the brake lights within the Jeep when the RV tail lighting and Patriot are in operation. This simple relay does the trick. The installation video was perfect for the installation. The only problem I ran into was crimping that the Jeep's braking signal wiring was 18 gauge, which was kind of loose in the 16 gauge (blue) butt connector. Used my own 18 gauge (red) connector instead. No problems.

Just received it, and have not begun to assemble and install. I will have a few questions. The shipping was VERY FAST. The unit looks to be in good shape. ( no damage that I can see) etrailer is a very good place to purchase stuff, and spend money. BECAUSE........You get the best value for your money, and they can answer questions. Tom

I do virtually all my own maintenance on all 7 of my vehicles. This installation is not conceptually difficult, but working under the dash of a Jeep Wrangler is literally painful. The hardest part is figuring out where to mount the controller and route the brake cable. My Jeep is not the same as the video and I needed to install it a little differently. Take your time here and get it right the first time. I made several modifications to the standard installation - including hooking all the signals (including the Monitor) from my truck camper to my towed Jeep through a 7-Pin RV connector and hooking the power to the Invisibrake through a switch to the battery so I don't have to run my Parking Lights to power the controller. I had a couple questions that the folks at Roadmaster answered cheerfully and professionally. BTW Etrailer is a pleasure to do business with.

Just finished a 10,000 mile trip trailering a 2014 Jeep Wrangler with Air Force One braking system and we are very satisfied with the product. No issues or failures and once installed, it is very easy to use. We can connect and disconnect from the Air Force One and our Blue Ox towing system in 2-3 minutes.

Excellent system. Takes a little bit to install, but worth the effort. Our toad is a 2021 Jeep Wrangler with the ecodiesel. Some of the passes that we did were 14 degree and the braking worked great!

I bought a complete flat tow parts fir a jeep wrangler. I decided I could install myself. Your installation videos made it nearly a piece of cake. From a quote I got from a RV service business, I saved several thousand dollars installing myself. etrailer is the place to for your RV needs!

Plug keeps getting loose on unit. I drilled a hole in the case and installed a tie wrap attaching wire to case no more movement of plug works great otherwise

If you’re installing in a 2 door Jeep this brake buddy will install much easier if you 1. Remove floor mat 2. Set the driver seat all the way back towards the rear and 3. Lower the driver seat all the way down. By doing this the brake buddy will fit properly and allow for installing the cotter pin into the cleaver.

Works as it should and easy to install and remove

Excellent packaging and informative videos available for installation. Made it easy and I saved $$$$ for professional installation doing it myself.

I purchased this BB Classic 3 in October 2020 after my old BB Classic that I purchased in 2008 failed to hold pressure for the piston. I bought this for my 2017 Jeep Wrangler but due to (1) the depth and unevenness of the driver's floor board, (2) the seat adjustment bar prevents BB Classic 3 from pushing against the seat and (3) the adjustable legs are not long enough to reach the seat and brake pedal properly, the BB Classic 3 fails the auto start test every time due to not being able to level. I talked to Hopkins MFG techs several times trying to resolve the issue (wiring checks, power cord checks, etc.) but to no avail. This situation makes the BB Classic 3 dangerous to have in service because not being level it will think something is wrong and keeps the brake applied (piston will not retract after applying the brake). So after talking to other Jeep Wrangler owners I determined that a platform was needed for the floor board on which the BB Classic 3 could rest. I constructed a platform that was approximately 3" off the floor board and rested on the floor board under the seat and on risers toward the brake pedal. This platform is level on the floor board both length-wise and width-wise. After placing the BB Classic 3 on the platform with clevis and power cord installed and legs in the lowest position, I tested the auto start and had 8 successful tests in a row!!! Also the brake away test was successful too. I still need to make a short drive test while in tow behind the motorhome. Hopkins really needs to advise customers that the Classic 3 will not work properly as is on a 2017 Jeep Wrangler due to the configuration of the driver's side floor board.

Everything I would expect! Great service, quick delivery, and awesome pricing!

Install was fairly easy. I did call support with a couple questions and they were very helpful.

The Brake Buddy has been working great. I just wish they had made the plug a more standard mount. It doesn't fit the standard mount point on my Roadmaster baseplate. I had to make a little bracket to adapt it.

I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver. I am 63 and I can connect/disconnect this in 5 minutes.

I installed this system in a 2023 2 door Wrangler. I also used an etrailer base plate and etrailer tow bar. I had originally purchased a Demco Delta Force Braking System. However, with the shape of the floor in the Jeep I was unable to use this unit. There are various places to install the stay n play duo in the Wrangler and the etrailer installation videos show this. I elected to install mine under the drivers seat as I wanted to keep it out of the elements. I fabricated a sheet metal bracket to mount it on that allows the rear seat heater duct to function unimpeded. Once installed the unit is out of sight and very simple to use. Just a flip of the toggle switch and its ready. I only needed to make a few adjustments to have it brake the way jeep the way I wanted. This is also a very simple procedure. I highly recommend this unit and appreciate all of the information etrailer has on their site to aid in the procurement and installation of their products.

This product was exactly what I needed. I wanted an indicator light that told me when the brake pedal moved on my towed vehicle, not when my brake system was activated. This part fit perfectly on my 2014 Jeep Wrangler sport. Others with newer wranglers reported having to notch bracket but there was no need for that on a 2014. I wired mine a little differently than the instructions show and there was no need to tap into the wiring on my Jeep. My indicator light recieved constant power from my coach, when the brake is pushed it completes the circuit with a ground from the coach and the light comes on. I feel confident that if there is a problem and my brakes are activated when they shouldn’t be I will be aware of this before it causes damage to the toad brakes. Great product

There was a challenge presented when installing the Roadmaster Stop Light Switch (Kit #751452) on my 2015 Jeep Wrangler Sport Unlimited. The kit's Black C Bracket was not able to swing around fully to allow the kit's gray stop switch to be in line with the brake pedal. This was due to blockage caused by existing jeep's stop switch gray mounting bracket. As a result, I had to cut a notch using a Dremel and a grinding bit. The area where I had the interference from the jeep's bracket and the notch to allow proper installation is indicated in the attached photo. It is imperative that the kit's stop light switch when mounted correctly is fully depressed. If not, 12 volts will be sent to the Evenbrake's transmitter which will result in an alarm and failure to use the Evenbrake system. Also in reference to the Roadmaster installation instructions, there is no removable lower plastic cover. Installation requires twisting ones body under the dashboard with limited use of my left arm (I am right handed) to use tools. I ordered the stop switch from etrailer.com. I am using a Roadmaster Evenbrake system. I do want to state a clarification concerning the battery based on what I read in etrailer's and other forums. You do not have to disconnect the jeep battery on the 2015 Wrangler Sport Unlimited Model. Jeep made a change in the second edition of the 2014 operators manual which is reflected in the 2015 manual. The earlier 2014 edition did state the disconnecting of the battery before towing. I had informed the Roadmaster tech department of this change. The 2015 Jeep Wrangler Sport Unlimited steering column does not lock. You do not have to leave the key in ignition. You can remove it when ready to tow. My 2015 jeep has the power convenience group. The vehicle has two 12 volt convenience outlets. One is only powered on when the ignition switch is on. The other outlet is connected directly to the battery via a fuse. It is on all the time. This is the outlet I use for the Evenbrake. Now, Jeep does state not to plug in devices that use more than 13 amps or 160 watts. Roadmaster as per their installation manual indicates that the maximum draw of the Evenbrake is 10.8 amps. I reviewed all the above to the Roadmaster tech department and they said I should not have a problem using the Jeep's always on 12 volt outlet. We recently went on a camping trip on Columbus Day weekend to a campground 120 miles from the house and no power problems were encountered with the Evenbrake system. One other clarification is that the Jeep's brake lights are tied into the power convenience/electronics system. The brake lights will operate for a short period of time after the ignition is turned off and/or you open the jeep's door. Use of the brake lights will time out. This is the primary reason why I chose the stop light switch bracket kit. The Roadmaster Evenbrake transmitter and the hot leg to the kit's stop light switch are fed from a dedicated 10 amp fuse protected line from the battery. This way, I avoided drilling a hole into the weather resistant under the hood fuse box plus negating the need to make rube goldberg connections to existing fuses.

Kit fits great! Hooked up a 2004 Workhorse to a 2002 Jeep Liberty. It might be preferable to be handy with some advanced mechanical skills and tools to install this efficiently. Directions are great but you do need to figure out your own locations for certain items like the break-away reservoir, compressor, routing lines and wires out of harms way, but not bad at all. Parts are great, everything there but added a couple different wiring splices of my own.

Your customer service leaves nothing lacking, and this follow-up from you is so out of character for the many web sites I have purchased from over the years. I am impressed by you and your company. I bought the tow bar and the brake system for my Equinox, and installed them my self (I am 70 years old) - and with your provided instructions and video, I had no problems (even though I was surprised by the number of parts and detail that went into the assemblies). Both systems have worked very well, with no problems. I am completely satisfied with them, and have told my friends and traveling acquaintances about your company. Thanks for your follow-up!

Overall a great system, there are some intricacies to the install as it pertains to old instructions with LED light in the TOAD vs. CoachLink Wireless and also the 3 wire reed switch vs. the newer 2 wire one. But using the provided written instructions along with YouTube videos you can figure it out. My other challenge was my Jeep is a 392 model and thus the battery and fuse box are in swapped locations, as well as a different VAC line layout, but again you can figure it out…just takes some time to study and trace the routing. My only real complaint was ordering, I was quoted the wrong system for my RV (Stay and Play) vs. AF1 since I DO have air brakes. etrailer was helpful in getting the return process but wants to charge me the shipping and possibly restock fee, I am working with them on this and hope to get a good resolution.

The Air Force One Braking system just arrived. I opened the box and looked it all over. No damage to anything thanks to good packing. A friend of mine has this same braking system and he loves it. Can't give a product review because it's not installed yet but I can honestly say Dianna A in customer service helped me get my order correct.

Installed on my 2021 Jeep Wrangler Sport. Only thing I’d change is to strip the wires on the switch and make butt connections before mounting on the bracket. It’s a really tight space for hands under the dash.

12 Volt outlet in 2020 Jeep Wrangler Rubicon is only active when ignition is on. Called ETrailer, very helpful with suggestion of 20 amp cigarette lighter adaptor. Should have it ready to go soon.

Worth every penny. You can't even feel the towed vehicle and that is exactly the point.

I this is a replacement for my new 2023 Jeep Rubicon. I am impressed with the brake notification unit for my motor coach. Nice touch!

Love the Air Force One. After professional installation, it's simple to and quick hook up the toad. The bluetooth display in the rig cockpit clearly indicates when toad's brakes are engaged. In the year since it was installed, we've used it over 10,000 miles with no problems.

Installation was tight on the Fiat 500 but the instructions were right on. No issues since installation. It's performing well.

Perfect, and the followup by etrailer second to none. It is nice to have their expertise in your corner.