Most Popular One-Time Setup for 2020 Jeep Wrangler

Absolutely great product and worth the time and effort to install. Once installed and "adjusted correctly" this unit is flawless. I installed it with everything else from ETrailer in 3 days, taking my time and I have a very clean installation. Once installed the tech support guided my "sensitivity" level for the perfect application. Also their TECH support was on it both times I called. The other was in ref to a brake light switch sold by etrailer but was not needed for this and they provided the intel off the top of his head. Absolutely recommend this product and both DUO and Etrailer as companies.

great kit for installing a supplemental braking system in my 2019 jeep wrangler. It takes several hours to install, but if you follow the instructions and watch the video, it's a pretty straight forward install. Just think it through and plan where you'll route the wiring and hoses. The hardest part was being flexable enough to mount the hardware to the firewall behind the brake pedal, but that's not a fault of the system.

Just received it, and have not begun to assemble and install. I will have a few questions. The shipping was VERY FAST. The unit looks to be in good shape. ( no damage that I can see) etrailer is a very good place to purchase stuff, and spend money. BECAUSE........You get the best value for your money, and they can answer questions. Tom

I do virtually all my own maintenance on all 7 of my vehicles. This installation is not conceptually difficult, but working under the dash of a Jeep Wrangler is literally painful. The hardest part is figuring out where to mount the controller and route the brake cable. My Jeep is not the same as the video and I needed to install it a little differently. Take your time here and get it right the first time. I made several modifications to the standard installation - including hooking all the signals (including the Monitor) from my truck camper to my towed Jeep through a 7-Pin RV connector and hooking the power to the Invisibrake through a switch to the battery so I don't have to run my Parking Lights to power the controller. I had a couple questions that the folks at Roadmaster answered cheerfully and professionally. BTW Etrailer is a pleasure to do business with.

Just finished a 10,000 mile trip trailering a 2014 Jeep Wrangler with Air Force One braking system and we are very satisfied with the product. No issues or failures and once installed, it is very easy to use. We can connect and disconnect from the Air Force One and our Blue Ox towing system in 2-3 minutes.

Excellent system. Takes a little bit to install, but worth the effort. Our toad is a 2021 Jeep Wrangler with the ecodiesel. Some of the passes that we did were 14 degree and the braking worked great!

Install was fairly easy. I did call support with a couple questions and they were very helpful.

The Brake Buddy has been working great. I just wish they had made the plug a more standard mount. It doesn't fit the standard mount point on my Roadmaster baseplate. I had to make a little bracket to adapt it.

I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver. I am 63 and I can connect/disconnect this in 5 minutes.

I installed this system in a 2023 2 door Wrangler. I also used an etrailer base plate and etrailer tow bar. I had originally purchased a Demco Delta Force Braking System. However, with the shape of the floor in the Jeep I was unable to use this unit. There are various places to install the stay n play duo in the Wrangler and the etrailer installation videos show this. I elected to install mine under the drivers seat as I wanted to keep it out of the elements. I fabricated a sheet metal bracket to mount it on that allows the rear seat heater duct to function unimpeded. Once installed the unit is out of sight and very simple to use. Just a flip of the toggle switch and its ready. I only needed to make a few adjustments to have it brake the way jeep the way I wanted. This is also a very simple procedure. I highly recommend this unit and appreciate all of the information etrailer has on their site to aid in the procurement and installation of their products.

There needs to be more packaging from the manufacture so this product can be shipped. The air tank moves around in the box so much that it damaged the control box paint. When you have a new vehicle, you like to look new.

Overall a great system, there are some intricacies to the install as it pertains to old instructions with LED light in the TOAD vs. CoachLink Wireless and also the 3 wire reed switch vs. the newer 2 wire one. But using the provided written instructions along with YouTube videos you can figure it out. My other challenge was my Jeep is a 392 model and thus the battery and fuse box are in swapped locations, as well as a different VAC line layout, but again you can figure it out…just takes some time to study and trace the routing. My only real complaint was ordering, I was quoted the wrong system for my RV (Stay and Play) vs. AF1 since I DO have air brakes. etrailer was helpful in getting the return process but wants to charge me the shipping and possibly restock fee, I am working with them on this and hope to get a good resolution.

I this is a replacement for my new 2023 Jeep Rubicon. I am impressed with the brake notification unit for my motor coach. Nice touch!

Love the Air Force One. After professional installation, it's simple to and quick hook up the toad. The bluetooth display in the rig cockpit clearly indicates when toad's brakes are engaged. In the year since it was installed, we've used it over 10,000 miles with no problems.

Towing a 2020 F250SD with powerstroke. The Blue Ox Patriot 3 just would not press the petal enough. This applies the breaks well. Had to mount the box behind grill due to no room under hood. Used some copper wire to make sure it stayed in place. Had to cut a bit of the plastic cover over radiator. One thing did that was a little off the instructions is I did not run power into cab with air hose. I took power off my charging coach-> Toad charging circuit because it was under the bumper. For the reed switch I ran a wire to passenger side fuse box and used a fuse tap. Every thing else was pretty easy. I am pretty handy and have all tools needed. I installed in about 6 hr.

I installed this system myself in an RV site. All went well and the system works as advertised. Please take special note to the inside brake peddle cylinder placement on the brake peddle arm.