# 1
K-Source Universal Towing Mirror - Clip On - Convex Mirror - Qty 1
Have used these on our 2015 Yukon XL Denali. They fit and tighten very well and are easy to install. I have them set up as shown in the picture here (horizontal). You can also set them up in the vertical position and I tried that but I lost peripheral view and like them better horizontal. Once tightened correctly they are very stable with no vibration. The material that comes into contact with the backside of the vehicle mirror is all rubber and there is no fear of scratching or damaging paint. I did turn off the feature that turns the mirrors down when in reverse and I don't fold in my mirrors when these are attached.
Product arrived sooner than anticipated. Great product, much better quality than I expected. Have owned other Mirror extensions but these are top of the line; especially the holding mechanism. Always use etrailer...great organization with above average customer service.
# 2
K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair
The Product does not allow both clips to fasten on the bottom due to the design of the car mirror otherwise holds fine and works.
# 3
K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2
The Product does not allow both clips to fasten on the bottom due to the design of the car mirror otherwise holds fine and works.
# 4
K-Source Universal Towing Mirrors - Clip On - Flat Mirror - Qty 2
Very good quality construction. Very good fit for a non-custom mount. Thick rubber straps are stretched over the car’s side mirror and hold the mirror well. My car is a 2017 Ford Expedition EL. Note: when you fold in the car mirror the towing mirror partially blocks the progress so that mirror stops early. It is still folded but not as completely as without the tow mirror. And yes, they are two identical mirrors so on one side the straps go up, on the other side they go down.
BUYER BEWARE!!!!!! I had great hopes for these mirrors. They look great. They appear to be very adjustable right out package. They fit on my Tacoma securely. They don't interfere with the function of the stock mirrors. Everything was moving along "swimmingly". Then I sit inside my truck to do the final adjustment (moving the actual mirror to get the correct setting and lock it into the "sweet spot"). The new Mirror is very stiff...doesn't want to move. Well, its new...so....Okay, I don't want to ruin anything...so.... No worries, I go get a phillips screwdriver to loosen the back screw a smidge so the friction adjustment can work . Come back start to back the screw out just a smidge...nope...still can't adjust the...wait...unscrew some more....that's not an adjustment screw at all. That just screws directly into the back of the mirror to hold it solidly in place. Worse yet, There is no friction mechanism on the back of the mirror at all. It is one solid piece of plastic. The molded plastic replicates the look as if it has the ability to move, but in reality....There is no way to do small mirror corrections once you have this thing installed. What the Actual people?????!!!!!!???? If you can't do minor adjustments to the mirror while you are in the vehicle, then the mirror is completely useless. I wouldn't recommend this product to my worst enemy. It's a piece of crap. DO NOT BUY!!!! A complete waste of time, money, and shipping costs. Now, I have to incur more shipping costs to send this POS back to etrailer. Hey, etrailer....Do Better next time!!!!
# 5
CIPA Universal Fit Towing Mirrors - Strap On - Qty 2
It took awhile to get these mounted,the instructions were literally the size of postage stamps, black on black, like some smudges with a hand in front - useless so I figured it out myself. The clips that these were shipped with were on back wards to add confusion, I took the big plastic clips off and used the small metal clips, bent the clip so they'd stay on when the mirror was removed. I think they woud work better if the strap were closer to the two pads instead of to the single pad on the inside. They are interchangeable but the one on the right is adjusted differently than the left so I'll find a small way to mark them, they're a big enough pain to locate and clamp down enough to stay put that I won't want to remove them after every trip but if I don't someone will break on in a parking lot (without the trailer). I've seen molded morrors that fit specific vehicles, slide on, fit the factory mirror houseing perfectly and a clip around the edge by the window keeps it there - couldn't find one for my Subaru Ascent Premium so I'll use these unless and until I can find better.
I like these towing mirrors. They seem high quality and really help me see what is behind my trailer. I like the way they tighten down on the vehicle mirror. I wouldn't say they are a perfect fit for my Jeep Cherokee but they fit good enough. There is a little vibration but not enough to discourage me from using them.
# 6
CIPA Universal Fit Towing Mirror - Clamp On - Adjustable Length - Steel
Trucks have blown the driver side mirror off twice but the good thing it never broke the mirror stopped went back and got it and put it back on tighter
Easy to install and remove. Minimal vibration with a great field of vision. Great buy.
# 7
CIPA Universal Towing Mirrors - Clamp On - Qty 2
Trucks have blown the driver side mirror off twice but the good thing it never broke the mirror stopped went back and got it and put it back on tighter
2019 Honda RidgelineA nice alternative for temporary mirrors for trailer hauling. They didn't interfere with the remote mirror adjustment on the factory installed outside mirrors and held securely once adjusted. I used them on a 2019 Honda Ridgeline.
# 8
CIPA Universal Fit Dual-View Towing Mirror - Clip-On
The vibration makes it nearly unusable. I’d say better than nothing, but not by much. On the positive side, it’s easy to install and adjust and fits our 22 Denali pretty well.
I bought the trailer mirrors for my Jeep Grand Cherokee to pull my pull behind trailer. See pictures. The mirrors attach easily and securely and shake very little when driving. I need them mostly when backing up and I can see where the trailer tires are going. The mirrors do not adjust easily but when you do they stay in place. What I especially like is the size of the mirrors and having two independent mirrors.
# 9
CIPA Universal Fit Towing Mirror - Strap On - Black
Not a good mirror. Second time using it fell off my car and smashed in road. Thank goodness it did not hit another car. The foam pads slid off and you can not get a good grip. I returned and they are sending me same one, because it was after 30 days.
Fit mostly well on vehicle. Have not used on road yet. Time will tell
# 10
CIPA Universal Towing Mirror - Clip On - Qty 1
Purchased a pair for our 2017 Jeep Grand Cherokee towing a nuCamp 400 from FL to AK and back. Three months and around 16k miles. Pros - other than an adjustment the second day, I never had to adjust the tension straps again. They were easy to mount and did not interfere with our mirrors folding inward. They weathered three months on the road without issue though I was beginning to worry about the straps becoming brittle. I noticed this once I removed them. Had I kept them, I would have used some silicon to rejuvenate the rubber. Cons - the only con is they shake. They shake to the point that sometimes I couldn't distinguish what exactly was behind me. I knew there was a vehicle, but the distortion from the vibration prohibited me from getting a clear view of exactly what was behind us. Impressions - they worked for our trip but I knew I would want something else for our next long trip, so we invested in a Furrion Reviewing Camera.
My rating is less to do with the product and more with etrailer. I ordered an identical mirror (CIPA model 11950) on amazon for less than half the price, 1 day shipping, free delivery, and it did not fit my vehicle so I bought the one etrailer recommended for my vehicle. I thought it was CIPA model 7070 but that is just the etrailer model #. I got CIPA model 11950 which I already have. Now I need to return the ones to etrailer and I'm being charged $16 to do so. This could have been avoided if the CIPA model number was immediately visible in the description (it is there in small print at the bottom). Also, my vehicle's mirror (2018 explorer) is not the same as the 2018 explorer in the video and picture. So it's not accurate for etrailer to say it fits all 2018 Explorers.
# 11
CIPA Universal Dual Lens Towing Mirrors - Clip On - Qty 2
The vibration makes it nearly unusable. I’d say better than nothing, but not by much. On the positive side, it’s easy to install and adjust and fits our 22 Denali pretty well.
the mirrors do a good job as far as being solid and don't move around . They do help to see some around the trailer ,but not enough for me . hoping a camera will help .
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."