# 1
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
The wet bolts were just fine. But the "locking nuts" with the crimped edges were aweful. The 3 dimples each nut has were not useful. Many of the nuts I could use my fingers to spin them on the bolts. Never had locking pressure. I ended up going to local hardware store for much better locking nuts.
I used these "wet" bolts on my leaf spring change out. I ended up using 3 per equalizer since that seems to be the location of most of the movement during axle travel and a friends 5th wheel had 3 installed on the factory set up, so that is what I went with. I painted a yellow mark on the head of the bolt in reference to the grease hole in the shaft, so that I could install them in the direction of "least resistance" when greasing them later, after reading how some guys have to relieve pressure on their trailer in order to get the bolts to take grease. I used Mystik 6 grease mixed with anti seize when putting everything together, then gave them 2 shots of Mystik 6 after installation. (I chose Mystik 6 because we always had good results with that grease when I was in the aircraft industry and it doesn't was out.) I did notice that the grease zerks did allow grease to return out of the fitting which means the spring behind the ball isn't doing its job. That is why I rated them as "good". There are different ways to install these due to the knurled shoulder. If you have access to an impact gun you can just tighten them in with that. Pulls the knurl right in to the shackle. Overall I like the idea of having a suspension that can be greased.
# 2
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
I needed it quickly because on stripped on my trailer and we were getting ready to leave the state in our Wold Pup. I paid for the extra shipping and they got out and to me in 2 days. Thank you.
These are the exact bolts used by the manufacturer of my trailer. I had a spring break after 10yrs use, so am replacing the springs and all the bolts at the same time, thank you to etrailer for the springs (ordered earlier) and now the bolts/nuts, all arrived quickly and accurately, you are my first choice for all trailer parts for my 7 trailers, thank you and keep up the good work!
# 3
Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter
Worked and fit perfect. Thanks
Quick delivery and excellent customer service (with follow-up emails to ensure that everything was ok with the order). This replaced a broken bolt on a 1956 camper trailer, and it's a very close match to the original.
# 4
Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
Got the kit today. Some of the nuts were oval and would not fit on the bolt of course. Now I have to go to box store and find nuts that fit! Not very good quality control!!
The parts shipped to me a day earlier than I expected. I was able to install one side that same evening. Finished the other side the next day. Plan on going camping next weekend. The parts seemed to be of good quality. The installation was straightforward.
# 5
1-1/2" Square Trailer U-Bolts (Qty 2)
I'm working on a 12 ft long 1957 Corvette trailer. Easy install, and perfect fit. I dropped the axle to gain 3".
I purchased these U bolts to upgrade the suspension on my trailer. I would get a a lot of trailer sway when I was towing my jet ski trailer. I bought the trailer used and never really looked at the springs. Unfortunately for me, There was nothing but one U bolt strapped diagonally across the spring. I'm no suspension expert but I knew this could NOT be safe. I did extensive research on trailer suspension. It was difficult to find parts for a 11/2 inch square axle. It was until I came across etrailer webpage. They had everything I required to upgrade and make my trailer safe to operate on the road. It was actually criminal what the person did to attach the original spring. I am greatful nothing ever happened while towing. Now with the new parts installed, I feel a lot better and my trailer does not sway anymore. I will definitely purchase my trailer needs from etrailer from now on. The pictures and videos make finding what I needed so much easier. The complete transaction from order to delivery was extremely efficient and the customer service is absolutely outstanding.
# 6
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
This is a great kit! It included everything we needed to replace the old, worn-out brackets on our 6'x10' trailer. The directions were helpful and the brackets and hardware are nice and solid. We've had zero issues with the leaf springs (purchased on etrailer.com, also) or the brackets. Would definitely recommend!
Excellent, had everything I needed and more for my trailer. Everything fit well!
# 7
Straight Equalizer for 1-3/4" Double-Eye Springs - 5-1/2" Long - 9/16" Center Hole
These are working great.
Fit perfectly on trailer and came with bushings installed. Wasn't expecting that
# 8
U-Bolt Plate for 1-1/2" Square Trailer Axles with 1-3/4" Wide Springs
I purchased this plate to upgrade the suspension on my trailer. I would get a a lot of trailer sway when I was towing my jet ski trailer. I bought the trailer used and never really looked at the springs. Unfortunately for me, There was nothing but one U bolt strapped diagonally across the spring. I'm no suspension expert but I knew this could NOT be safe. I did extensive research on trailer suspension. It was difficult to find parts for a 11/2 inch square axle. It was until I came across etrailer webpage. They had everything I required to upgrade and make my trailer safe to operate on the road. It was actually criminal what the person did to attach the original spring. I am greatful nothing ever happened while towing. Now with the new parts installed, I feel a lot better and my trailer does not sway anymore. I will definitely purchase my trailer needs from etrailer from now on. The pictures and videos make finding what I needed so much easier. The complete transaction from order to delivery was extremely efficient and the customer service is absolutely outstanding!
Good quality product would purchase again
# 9
Nylon Bushing - 9/16" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long - Qty 1
Good product. Unfortunately theses where not the correct size I needed.
The right parts delivered quickly. Thx
# 10
2" Square Trailer U-Bolt (Qty 2)
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
Melissa T Provided excellent customer service. I Would recommend to everyone use etrailer.
# 11
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
Bushings quiet the trailer for a short period of time. Bushings wear out and squeaks return quicker than I expected.
# 12
We had a broken balancer on the right side of our 5th wheel. The right side had one shackle wore through and a couple others not in good shape. We changed out both sides in short order we could ever level the whole works. The parts were exactly what we wanted and came by post sooner than even expected. Very happy with the whole process!!!
Shackle Strap fit and works as expected. I'll know more about it durability after running it for a few years.
# 13
Replacement Shackle Strap - 2-5/8" Long
I was very disappointed when I received the shipment from etrailer and only half the parts were there. When I made the order I was told everything was in stock and would be shipped.
Easy installation holding up well.
# 14
Had a leaf spring break on my off-road trailer in Mexico. Left it at a boat yard until I received the parts from trailer & returned to replace. Only took 2 hrs to replace both leafsprinhs, shackles, bolts etc. And we were back on the road.
# 15
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
Install wasn’t bad. Grand design welds a V bracket inside the spring hangers for more strength so that was my only challenge on install. This caused a problem on the center hanger as the spacer wouldn’t fit. Had to grind about a quarter inch off the spacer so it would fit as I could only bend the bottom of the hangers so much. Will be towing about 100 miles this weekend so it will be nice to hopefully not have broken drawers in the back of the trailer as well as shelves in the fridge door dislodged. I also did the X factor cross braces on the front and rear hangers for more strength. Will post back after we get more miles on it, but given all the other positive reviews I don’t think I’ll be unhappy.
What a great product. The difference it made in our ride was outstanding. You almost forget you are towing a 35 ft 5th wheel behind you. We travel from West coast to East coast over all type roads and this product made such a difference. Sorry we didn't have it installed sooner. Definitely made a differance and would highly recommend to all Rv owners.
# 16
Lippert Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle
Installed slippers Center Point system on out Alpine 3101RL 5ver. The install is straight foreward if your mechanically inclined. Now about the lack of instructions, nothing shipped from Lippert. etrailer provided a link to help with that. I do prefer printed instructions opposed having to scroll through my phone with dirty hands. The torque specs provided by Lippert don't align with normal torque charts for said fasteners. The banana shackles are very thin and unplated,they are just raw steel. For the cost of the suspension Lippert cound do better on the shackles in this kit. Lippert recommends in stalling the air gauge for the air bags outside,however to gauge is a cheap plastic model. I feel it would have a short life span exposed to the elements. The good now, it seems robust and likly to help absorb road shock. I have not had our 5ver on the road yet. But I will leave more feed back when I have. I purchased this suspension system after finding a broken main leaf on our front tandem. I replaced all of our leaf springs bushings and bolts with the wet bolts Supplied in the kit. FYI Lippert neverfail bushings fail in less than 7k miles. We are not over weight.
Just installed the lippert center point and I have to say very impressed on how well it’s built. Super easy to install and I can’t wait to take it down these California roads and see how much better it rides. Installed on a 2022 jayco eagle Ht 29.5 BHDS
# 17
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
The package arrived quickly as they said it would. I installed it as per the instructions and the job was easy. My Trail Lite Camper trailer has tandem axles so it was easy to just drive one set of axles up on ramps and install the lift kit on the hanging axle with the trailer hooked to the truck with the brakes locked on the truck. Anyhow, this lift kit was easy to install and did the job of raising the rear of the trailer from 14" to 18" after installation. Everything fit perfectly thanks to talking with Alex of etrailer.com and getting the right kit for my Dexter #10 Torflex axles. Attached are some pictures of before the install, during and after the install. I'm very satisfied. FYI the project goes a lot faster if you have an electric or pneumatic impact wrench to remove the old rusted mounting bolts and installing the new bolts.
I got these for my 1998 Trail-et gooseneck 2 horse trailer after we upgraded from a 1994 truck to a 2023. The new truck is much taller so I needed to lift the trailer. This kit was perfect, all of the holes lined up perfectly and it gave me the height I needed. The hardest part was cutting the old bolts off the trailer.
# 18
Timbren Silent Ride Suspension for Single Axle Trailers w/ 2-3/8" Round Axles - 2,000 lbs
# 19
Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
This kit (a dual kit) changed my view of Dexter as a quality-first manufacturer. etrailer simply sells it, they don't make it, so they aren't to blame. This kit is made specifically for mounting Dexter's General Duty 9,000 lb axles in tandem and is different from kits made for 3500 to 8000 lb axles. It provides extra axle tube to frame clearance to accommodate the 4" axle tubes used on their 9k and 10k GD axles. It uses beefy 7/8" equalizer pivot bolts and 5/8" spring eye bolts. So far, so good. Until you pay over $350 for it and receive a suspension kit with absolutely ZERO lubrication provisions! Seriously, Dexter?!! The bolts provided are all just grade 5 hardware store plain jane dry bolts. Not even grade 8. Dexter sells 7/8" greaseable "wet bolts" and even their lighter-duty hanger kits include greaseable wet bolts. But even if I paid etrailer the nearly $XX apiece they want for them (they're half that price elsewhere), there is literally no way of putting a square-shouldered carriage-style bolt, which they are, in the round roles this hanger kit was manufactured with without modification. As for the 5/8" spring eye bolts, only a great deal of internet searching will find any wet bolts the right diameter, and they'll be the wrong length. Those 4 bolts are about $20 each plus shipping. So, by the time I pay a machine shop to square the equalizer bracket holes on and buy all the wet bolts, or have them made, JUST so I can lubricate this expensive hanger kit in hopes of it lasting more than a very short time on a trailer that often grosses 20k, I'm going to have over $500 invested in it, not counting all the extra wasted down-time. This kit was supposed to solve my trailer suspension problems, not create more. FAIL!!
I purchased the 7 leaf sliper spring to replace my old ones. etrailer had all the parts needed to rebuild my trailer. The parts fit perfectly. The people there are very knowledgeable about the trailer parts and what is needed and what will fit when replacing old worn parts. I would stronly recomend etrailer for any of your trailer needs.
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"