Most Popular Hitch Bike Racks for 2019 Subaru Crosstrek

Works really well on my Cross Trek. I only have one bike and can open and access the hatch without removing my bike if I put it on the outside. Only improvement I can think of is if the tubing were larger it might be more rigid, but it does seem strong enough as is.

Rack seems like quality, no wobble. One of the set bolt threads was stripped but customer service was Great! Got me a replacement insert in 2 days! 4 stars for customer service

Love this rack and use it every day on my Toyota Tundra pickup. I ride my cruiser on the beach and loading/unloading bike/s is really easy. I travel to riding locations as well and even at highway speeds, two bikes remain secure and wobble-free. My bikes are expensive and the stand-up mode of securing them means no worn paint or scratches. If any complaint it's not made for the salty air here in FL and certain parts corrode...even with daily rinsing off. The rack is perfect for the fat and oversized wheels on bikes I've owned...even heavier ebikes...WILL BUY IT AGAIN.

I had a little bit of trouble assembling the rack at first, but it was complete user error and the folks are eTrailer were really patient in helping me out. Once the rack was assembled it has functioned wonderfully. My only note is that it appears to be built to sway slightly which is strange, but doesn't hurt anything. Bottom line: great product, great price and I'm happy I bought it.

Really impressed with the quality for the price. Looks great too. Does a great job of securing the bikes as well. I’ve owned bike racks that secure by the top tube and find this design much easier.

Package was barely together and this is a second order which was delivered in horrible condition

Everything was just as promised: the bike rack arrived well packed. Excellent instructional videos made the install a breeze.

I love this bike rack, it fits my needs perfectly. It was easy to assemble and feels very solid in my 1 1/4" hitch.

Works for my fat tire bike. Once it's set up, it's easy to install and remove. I had to cut out some of the plastic cladding on the underside of my bumper on my 2014 Subaru Outback. Good value. I've had no issues.

Good quality and design. Wish the build in lock as a bit longer, but it could be paired with another cable lock to get all the wheels for two bikes.

We love this bike rack for its ease of use and solid construction. Bikes are quick and easy to load in and lock down tight. The hitch-receiver tightening system works great for a wobble-free rack and the hinge and locking lever work smooth and solid. It looks nice too.

I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.

Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.

My previous bike rack was a hitch mounted Yakima. It was sturdy but not well suited for my low Subaru Impreza. It stuck out too far and hung too low so that I had to inch my way down the driveway or over speed bumps for fear of it bottoming out. A roof rack or a rear window mounted rack was not suitable since I wanted to be able to also carry two kayaks. First, I tried to modify my rack by shortening the part that sticks out of the hitch. I tried to saw off about 6 inches so it wouldn't stick out so far but the steel was much too hard. I ended up ruining several metal-cutting blades on my power saw before I gave up. I looked for other rack options. There weren't many out there. But eventually, I found something that met my needs. I purchased the "Swagman Trailhead 3 Bike Fold Down Bicycle Hitch Rack" in 2013 from eTrailer.com. The part that enters the hitch curves up to increase clearance from the ground. It is sturdy and sticks out far enough so I can still open my trunk hatch without having to lower the main vertical bar on the hitch (though I could if I wanted to). It isn't often I am really excited about a piece of gear but this hitch rack has made me worry-free when I transport my bicycle(s) via car. The only thing I don't like is that it is advertised as being a 3 bike carrier but it only fits 2 hybrid bikes. Maybe it will fit 3 skinny racing bikes but for the average rider, don't expect to fit on more than 2. But my experience is that is the case for all bicycle racks.

Nice heavy duty rack. Putting it together is quite simple if you read the instructions. I like the ability to use both a 2" or 1 1/4" receiver. etrailer is very easy to deal with.

This is a really good rack. We do a lot of car camping out of our Subaru Outback and I wanted a bike rack that would swing aside so we can raise the hatchback and easily access the camping gear, cooler, duffel bags, etc that we carry in back (see photo). This rack 100% solves that problem. Further, the bike hold-downs are very secure. I use them on their own for shorter trips. For a longer trip or one that may involve a rough road, I supplement them with a ratchet strap, but this is probably just unnecessary paranoia--the hold-downs are excellent. My one heads-up about this rack is that it is heavy. I am a large, strong man and can attach it myself, but I do not look forward to the chore. This is a beefy rack and the weight is unavoidable. I welcome how sturdily-built the rack is. We typically carry my normal bike and my wife's heavy e-bike on it, and the rack is totally up to the job. Highly recommended. I have zero regrets about the purchase and the investment in this rack that will serve us for many years to come. The design is pretty much perfect--I can't think of one thing I would change.

We love our RockyMounts BackStage Bike Rack. The fact that it can hold our two e-bikes and swings out for rear door access makes it perfect for vanlife. Service and communication from etrailer is outstanading!

After much searching, I decided to purchase the Kuat NV 2.0. I was fairly easy to put together….” Read the directions “ it will tell you exactly what and how to put it together.. Great instructions easy to follow. I was able to adjust the wheel cradle to fit my bike quickly. I was a SMALL problem…. I did not get any information from etrailer like I have in the passed… which was strange. So I did not know if they were processing my purchase or not… The money came out of my account. So I after my bike rack showed up… I sent a text to them, with in minutes I received at response, that said they were looking into the problem.. maybe 20 mins later I got a response from them … It seems I Fat Fingered my 1 letter on my e-mail address so etrailer could not send tracking information… Thank you so much GREAT SERVICE. I will use them again

Product was pretty easy to assemble. If assembled it solo, and it was a bit tricky keep the trays level as I bolted them to the center beam. I used the foam blocks that came with the packaging to keep them level as I tightened the bolts. The product looks fantastic in gloss black (matches my trim). Have not mounted the bikes yet (it's winter) though I did mount the rack in the hitch and took a test drive ... all good.

Good mount over-all. Item was delivered without the packing straps. Not sure if the package was opened prior to shipping. There were no missing parts. The mount seems to function normally. I do have one complaint - the mount is not level when attached to my Ridgeline 2" hitch. My hitch is in perfect condition - unused prior to the purchase of this mount. The mounting bolt for the hitch is fully tight, but still the mount is crooked to right by 1 inch. Oh well - not a deal breaker.

We have two e-bikes and researched for a rack substantial enough to carry them long distances. The RockyMounts Monorail is doing the trick. We remove the batteries and seats. Based on other's advice, we put pieces of foam pipe insulation over the straps and braces that contact the bikes. Also, just for overkill, put additional cinch straps over the front tire rim at the wheel support. I also fabricated a license plate holder because the plate is obstructed on the SUV. The quality of construction and ease of assembly are both outstanding.