Most Popular Dexter for 2019 Ram 3500

When the OEM steel brake lines wore out on my boat trailer I decided to upgrade the surge brakes to electric over hydraulic (EOH). I replaced the damaged lines and wired up this Demco actuator and now I can stop my trailer on a dime -- should have done this 10 years ago. The actuator works flawlessly with my 2017 GMC's built in controller -- nothing else was needed! Please note though that the GM controller does not apply the brakes when depressing the pedal if the vehicle is not moving (duh). So don't be surprised if you try to test it sitting in your driveway and think that it's not working -- it's designed that way to save wear on the pump if you're not moving. Pressing the manual control does apply the brakes though. (The brakes also apply if you're on an incline). I fabricated a mounting plate out of 3/8 aluminum since the trailer tongue was not wide enough and attached the pump using 4 countersunk 1/4" stainless bolts and then used two 1/2" square u-bolts to affix it to the trailer. If I set the gain on the truck to max, I can actually lock the trailer's wheels, something that surge brakes can't do on their best day! Back in 2010 I upgraded my disc brakes to Kodiak all stainless steel rotors, mounting plates and calipers -- 8 years old and they were still like new -- also well worth the money!

Pump works great. Disc brakes with this pump work 10 times better that electric drum brakes. 4 stars because it took a couple of months to get

Reps are friendly and helpful.

Spring on the lever broke almost immediately after installation.

Got my Brake Actuator so fast. I love that these guys have so much stock, amazing prices, and do customer service the old fashioned way!!! Thank you etrailer.com??

We never got it to operate properly. We ended up removing the entire hydraulic system and replaced it with electric brakes.

Awesome coupler. My trailer is a 1990 and the old coupler was welded on. Had no other option than to weld the new coupler on. Came out great and works perfectly. Made my own brake lockout key. See photos below

I received the actuator with no manual. Contacted etrailer.com to get the manual and was told they didn't have but would contact UFP. Nothing from UFP. I contacted Dexter, who apparently bought the line from UFP. They don't have it either. I have it installed but am trying to figure out how to bleed the master cylinder. OLD instructions from UFP are NOT accurate.

I pulled my boat for 1,500 miles soon after replacing the old pump. Brakes were effective and worked perfect. That was a year ago. Last week I launched my boat for the first time since then. No brakes. After a lot of contact cleaner, plugging and unplugging the cable to the truck, exercising the brake actuator, I finally got the pump to work again. That was the reason I replaced the original pump which was inop because of not being used. If you don't use it, you will lose it. It is a very expensive part. Dexter will not sell you the electronic pressure proportional valve that gets gummed up causing the pump to fail. Dexter will not give you the part number for that valve. Unfortunately, the stamped part number got obliterated part number during removal was unreadable. This was a very expensive lesson to learn, $1,069.98. In the future I will be exceptional careful when removing the valve should I have another failure. That valve will probably sell for less than $100.00. As far as Etrailer is concerned, they are the best when it comes to shipping quickly and helping the customer get what he needs.

I am most please that this company stands by their product and is a pleasure to deal with!!!!!!!!!!!!

Delivery was very fast. Quality seems very good. Installation was super easy since my Shorelander swing tongue trailer has this standard hole pattern. I love how it looks and the extra foot of distance I get between the boat and my tow vehicle (so less chance of needing to get my feet wet or crawl through the SUV).

Finished drum to disc brake conversion on my 1993 year model Bass Cat trailer. Installation went smoothly and the UFP-A60 Actuator replaced the obsolete Atwood Actuator. Shortened the outer member a bit and added a 1" flat bar to the bottom for welding of 4" channel trailer frame.

Product arrived just as described and packaged well!

solid actuator for a fair price. The auto latch feature is a nice feature.

I put this on an easy loader trailer that had an Atwood master cylinder which is now obsolete. Cutting the old actuator off was a real bitch. Installing the new Dexter actuator was very easy. I could bend the existing brake line 180 and hook it directly up without having to change the end. The bolts were easily available at the hardware store, I wish they would have came with it. The quality of the drop and go hitch is unbelievably easy to use.

This is a nice easy to use hitch. This is the 3rd one purchased for boat trailer hitch replacement. Really like the drop and go feature.

Pros. Works great really noticed the difference right away. Ed W. with etrailer was great to work with helped determine which one to get. It was a fairly simple install. Con. The reverse lockout was further away than my original, just a little, so my brake line was too short. Auto parts places didn't have a flex that fit the thread. I was doing this on a Sunday so I had to drive across town to a trailer guy who was open for a flex line. I would give it 4.7 stars if I could would of gave a 5 star had they included a short flex line with the kit. It's about a 2 hour job with everything you need I spent an extra 2+hours getting a part. All in all been using for a year and I am completely satisfied.

The product is as expected and an exact replacement for my trailer. The exceptional part of the transaction was the speed my order was filled and shipped.

Perfect fit for my boat trailer. Only complaint is the surge brake backup plug is not attached by a stainless steel cable. It’s just loose so I have to keep track of it so I can use it when backing up a grade.

Updating my old surge brake coupler, I really like this Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K fits 3”x4”trailer tongue, it was easy to install, I did have to drill new holes, I just wish the manufacturer would have included the bolts and the information on how much to torque the bolts to, it’s about “2 drop from my old coupler. etrailer was super fast with shipping !

Great product, fast shipping. E trailer has everything you need. Thanks

Works great- no issues

Not a fan because of the screw down and up for ball attachment. Unit Itself works great.

I absolutely hate the twist lock on it. Received this twist lock style instead of what was pictured with a flip latch. Called to speak my piece about it and was told it was all they had. Now I'm stuck with it. I hate it!

Product specs are right on. Well built.

Was exactly what I was expecting, good quality, a fair price, and will fit right on my trailer tongue. Good job!!!

Amazing price for my favorite hitch, tongue actuator system made. I own 6 trailers and have had another dozen in the past. There is no better looking or functioning system .

Works fantasticly Glad I changed it. Etrailer is the best.

No grease fittings, the solenoid is not protected from the elements, the zinc plating will surely disintegrate within a year in saltwater.

service and products are great shipping was a shit show which has nothing to do with you thanks ups