Best 2018 Chevrolet Silverado 3500 5th Wheel Gooseneck Adapters

Love this hitch. It has performed great with my 17,000 lb trailer all year. A very stable and reliable platform for towing. Easy to set up and plenty of adjustment to get the trailer just right. The only negative is the weight, not the easiest to get in and out of the truck by yourself.

This is a very good High Quality Hitch. Very Happy with it. The best thing about it is no rails in bed.

Product arrived fast, had it installed and towing within 30 minutes, set screw jam nuts on height adjustment slightly hard to get to but happy with the quality. Towing my 5th wheel around to test I noticed it felt much tighter with less chucking and bouncing than my last rail style hitch.

Great service helping with my 5th wheel trailer hitch problem

I absolutely love my Companion hitch. It is the quietest hitch I have ever owned. It also has the the strongest and thickest jaws around the fifth wheel king pin I have ever owned. The slide is very easy to operate and even though it is quite heavy for a 69 year old man to take it out and put it in my truck I still would recommend it to anyone who needs a combo gooseneck and fifth wheel hitch set up. There is absolutely no slop or movement of the king pin in the jaws, unlike most other style fifth wheel hitches that I have owned in the past. In my opinion you would have to go way out on a limb to try and top this one. Dan seegmiller

We pulled our 36 foot camper across country with no problems

Really impressed with the quality of the Curt product. Worked out great, fitting my new to me 98 Dodge 3500. Thanks etrailer.

The Curt Gooseneck rail adapter works great for towing my 38ft Mobile Suite 5th wheel. And i can remove it and no rails to deal with. I would recommend this product. Two Thumbs up!!!

This adapter allowed me to quickly install a fifth wheel hitch in my single wheel shortbed truck which had a gooseneck hitch without any extra installation work, other than just dropping it in. Easily installed and has worked well with a slider hitch.

don't like it at all,,, turns on my flat bed with a trailer hooked up,, called company and they suggested to tighten it down tighter, and tried, it still turned. trying to find something different.

I have a standard bed on a 2024 Chevrolet 2500hd and the offset hitch extends too far so that it contacts my bed on the left and right when I angle my trailer at about a 120 degree angle. I will get the straight one so it will fit properly. My rhino box fifth wheel is pretty short but makes this setup too long. Get the straight one if you have a Chevy with a rhino box 5th wheel. Towing is nice and hookup was easy. 3 stars just because the offset hit the sides.

This is my first 5th wheel but I have several other gooseneck trailers that I tow on a regular basis. I didn't want to have to switch back and forth so I bought this adapter. I have a long bed but I have a chase rack on it that goes up over the cab. I really didn't want to have to remove it every time I wanted to tow my new toy hauler so I got the offset hitch. Install was very straight forward. Took me about 40 min. to install. The hardest part was getting the bolts in as mine has the long pin box and it was all I could do to reach the holes. I don't have very many miles on it but it tows great. I didn't notice any difference from my other gooseneck trailers.

Used the Companion hitch to convert gooseneck ball mount to 5th wheel hitch. Companion fits perfectly inside the well of my flatbed and is easy to remove to use the gooseneck ball and easy to re-install. The hitch is very secure and tows my RV quite smoothly. There is no back and forth movement and I couldn’t be happier with it. Easy to hook up and disconnect the trailer. Highly recommended. Etrailer staff was very helpful in helping me find the right equipment to meet my needs.

Hitch is great, B&W products are exceptional. Had the turnover ball mounted on a Douglass flatbed. Purchased the fifth wheel hitch for a 37 ft two axle toy hauler. Pulls great, easy installation. Make sure to make all the appropriate measurements before purchasing. There were some shipping issues. etrailer failed to send a bolt bag initially. Took a while to get that rectified, but all is well.

Delivered in great time. Product fit just like it stated. Saved me a lot of time and money. I will buy from etrailer again.

Products fit properly, I haven’t used it yet with my 5th wheel hitch but appears to be sturdy and should work well. Easy to switch form 5th wheel hitch to gooseneck ball.

Had to use chain and a cheater pipe to seat this in the gooseneck, but it’s better than being loose. Mounted a Curt A20 on it and it pulls a Keystone Montana like a dream

Fast delivery like I love!!! This is my 2nd unit I've ordered and very pleased with them. I have 2 car haulers that had the gooseneck set up. Bought this so I can pull with my semi! Excellent choice. More to be ordered for my trailers and I'm definitely ordering from you guys!! Thanks

Quality steel, heavy duty. Good product. It does have some rough/sharp edges though.

William was great. The actual sales part of this was beyond excellent I received my Gen-y in only a couple of days and my son and I easily installed the hitch on the trailer in less than an hour and a half. We used a floor jack to support it after we hitched it to the goofball in the truck and then backed up into the trailer pocket and then used the hydraulic jacks on the trailer to get it in perfect position and bolted it down.

The Gen-Y hitch is very stout & well built. Fit & finish was excellent. Installed myself in about 30 minutes.

Shipping was fast. Experience with e trailer was good as always. Part was not so impressive. Plate where welded onto tube was not in line with the holes causing the hitch to not align with the trailer. Other than alignment hitch adapter looks and feels sturdy and robust.

Does not work. Makes front of flatbed trailer too high & ramps won’t land. And I had it blasted and painted before installing. Wish the weld was flat on 5th wheel plate.

This is a great product and would recommend it for anyone who doesn’t want to purchase a 5th wheel hitch

Order confirmation was fast, shipping was fast, they said it would be here Saturday but ups doesn’t deliver on Saturday or Sunday so it didn’t get here until Monday. I knew this so I was expecting it and I didn’t need it right away so to me it didn’t matter. Everything was delivered in good shape when it got here. I’ve bought one of these from strainer before and liked it so when I found I was in need of a goose neck adapter again I got the same one and etrailer came through again. This adapter is expensive but it works great. Would recommend.

Installed this hitch adapter on a small-ish fifth wheel trailer (2007 arctic fox 21-5R). I've waited to review now that I've finished pulling the trailer through the Canadian Rocky mountains to Vancouver island and back ~4000km or 2500 Miles. The hitch installed fairly easily in about 2 hours, with careful attention to centering and torque specifications. The hitch performed as it should throughout my recent trip, no problems with function whatsoever. The only downside I see with this hitch adapter is the need to raise the trailer a few inches higher each time you hitch/unhitch, in order to clear the gooseneck ball. Also, when nearing a full 90 degree angle between truck & trailer, the pin box may rub against the bed rails. This is partly due to the ride height of my truck. Otherwise, excellent solution for avoiding the Fifth wheel hitch in your truck box! Picture attached, dodge 3500 regular 6 foot box (levelling kit, 35" wheels) with arctic fox fifth wheel trailer. No modifications to trailer other than the ranch hitch adapter with offset for short box truck.

I have a 2019 f250 with the 6.5' bed and didn't want a heavy, bulky fifth wheel hitch taking all the bed space up. I had the fifth wheel package already installed as well, so it didn't make sense to not use that. I about went with the ultimate hitch that Anderson offers but decided against that as I have seen many reviews where the hitch failed. I saved a bunch of cash going with this product and it is awesome. I installed it by myself in my drive way in about 2 hours start to finish. I have zero issues turning so close to a 90*. I have a headache rack on my truck and it gets within an inch or two of hitting that but not my truck. I don't have any issues with the king box hitting the bed either like some people stated. The test ride today went very well. It rode very smooth and I have plenty of bed space for my dogs and gear. I would highly suggest this product if you are on the fence like I was. I will see how this will hold up over the years but I doubt I will have any issues. The shipping effected the sheath covering over the cable, I contacted the company, sent some pictures and they will be sending me a brand new part. I love this company and the products they stand behind!!!

Everything is working fine. Product fit great and pulling like a champ. Great packaging job too.

The trailer adapter we ordered is made very well. Our order came very fast. This is a great business to buy from. We have bought from this business before and received great service every time.

You can not beat etrailer by any means!! Ordered at 5:04 and at 5:08 the order was filled and I received it the second morning. Good product, fast shipping, and good prices!!

Very good quality. Welds and fit are excellent. I used this to adapt a 5thwheel. The factory pin box was the wrong style to fit my truck and hitch. This coupler adapter allowed me to use vertical adjustment to let my trailer clear the bed of my truck even when turning. As you can see I cut the coupler down to suit my needs and it seems to have worked very well. My only complaint isn’t even really aimed at the part or etrailer but at usps. etrailer shipped the part the next day and I had it within 3days. The box it came in was shredded!!! Again not really the fault of etrailer or the part but y’all might think about using better shipping containers or using a better shipping company. Also wrapping these bigger heavier parts with sharp corners in shipping Cellophane might help keep the boxes in 1 piece. Thanks!!

Quality control kinda sucks with this one. I'm not happy with the crooked set screws primarily. Also not happy with the crooked load bearing pin holes that so many others mentioned. I bought this combo because it was only $[XX] more than the inner shaft by itself. Tried to get a partial refund or send it back but they want me to pay for shipping, so it's not worth it. I would recommend buying the Bulldog brand, might have better quality design.

Best customer service experience parts came in faster than expected and well packaged had placed the wrong order the first time and emailed the customer service to cancel order on a sunday replied right away and got me set up with the correct parts definitely my go to place from now on as a first generation farmer and having to deal with many trailers either to move cattle or equipment this is a place of business i can now trust thank you customer service department

Great replacement for the Curt Turning Point pin box! Easy to install and took a couple hours since I did it by myself. I had to purchase new 5/8” locknuts as the originals from the Curt install needed replacing. I also had to buy (4) 5/8” nuts from Tractor Supply since the Curt install had nuts welded on the front 4 bolt locations. I used the Curt 5/8” bolts and flat washers since they did not need replacing. I haven’t had a chance to get the trailer on the road yet, but see no reason why it will not pull nicely with the Gen Y gooseneck. It will be pulled with a 2022 Chevrolet Silverado 2500HD 6.6 Duramax and 10 speed Allison transmission.

The ride while pulling our trailer is much better. While there is still some bucking, the Gen Y hitch is much smoother. The install was fairly easy as well.

The 5th wheel trailer coupler adapter works very well. It's strong, solid, and we'll made. Highly recommend!

Box was destroyed due to shipping with the USPS, but heavy pce, so its was expected. HItch was as expected, satisfied.