Most Popular White for 2017 Nissan Pathfinder

Perfect replacement for my 2012 Keystone Passport travel trailer.

Was missing the retaining clips on both items. The old ones were ok.

Several of the vent covers were crushed in shipping from being stacked in the boxes (metal arm from one on top pushed in to one under it). Trailer promptly replaced them after sending pictures. A testament to their customer service and satisfaction. I would definitely order from them again. The covers themselves fit perfectly on our 2017 Montana 5th wheel

Perfect replacement for our 1999 Jayco Kiwi bathroom vent cover. Easy swap out. We are ready for another year of outdoor enjoyment thanks to etrailer's excellent customer service.

After many months of fretting over cutting into the roof of my new van, and waiting for the rainy season to end, I found the installation very easy, and the operation is great. We're currently on a road trip, and the MaxxAir has made camping much more comfortable, and it even improves air circulation while driving with the vent open. it's very quiet at low speed and no leaks in even the heaviest rain.

The new fan is replacing a center bathroom vent fan to have a bathroom fan that can also vent excessive heat out of the RV. The four speed fan works well and moves a minor to significant level of air. I had to upgrade the four fan attachment pan head stainless steel screws from #10 x 3/4" to #12 x 3/4".

The vents in the garage part of my RV were fixed position. These louvered models snapped right in. Now I have some control over the air flow back there. Note: The collars that screw into the ceiling are included, though I just left the old ones in place.

Glad I can close some of the vents now .

It’s been one year (1/4/23) since I purchased and installed these products on my 1994 Airstream Trailer. The complete kit was more than adequate for my job given that the trailer had a few other areas requiring attention or needing the self-leveling sealer. I waited for the ideal conditions (weather, temperature, and time of day) before applying the parts and sealing a few other external components. We’ve had several rain events and temperature swings and these products have held up very well. The trailer serves more as an office now which increases the importance for not having leaks! This was a great choice to select these projects and particularly, from this vendor. They were very responsive and quick to get the order out. Thanks to George and his Team! Happy New Year 2024

The vent works fine but the inside trim that is supposed to go up to the vent so you can’t see the roof framing is about 2” short. If your roof is more than 2.5” thick you will need to reuse your old trim or make something to close the gap. Maybe I ordered the wrong one?

Easily and effortlessly installed. They are made of nylon or flexible plastic I believe. White, powder coated aluminum would have been better but after a few hours of searching these were the nicest looking and the best price.

These vents were exactly what I needed and was looking for to install on my home built steel frame aluminum skinned motorcycle trailer to create a positive continues in and out air flow to vent summer inside heat and fuel fumes out of the trailer that does vent from the m/c gas tank. I installed a total of four vents, two up front, one on each side high near the roof facing forward to force air in when the trailer is in motion and two on each side at the lower rear facing aft (rearward) to exhaust which will create a vacuum effect as the trailer is moving forward. Installation and painting was done pretty much the same way mentioned by a previous review made by Ray H. on 5/24 . I will add this helpful hint to make your multiple vent install go quick and accurate. If you first make a installation jig out of a piece of scrap 1/2 to 3/4 inch plywood large enough to trace the outside vent screw holes onto, but first drill the 3" hole with a hole-saw then slide the inside round vent tube through the plywood then fit the outside vent onto the inside thru tube collar now you can trace exactly where you need to drill the outside vent screw holes and everything will be aligned for a correct fit when you drill through your trailer wall. Now all you do is drill and secure with screws this plywood jig temporarily onto your trailer and drill all your holes and the plywood jig will insure your hole saw doesn't wobble or elongate it's pilot hole either. Last but not least, let me say that the entire staff at E-Trailer are the best regarding fast courteous and follow up service even after your order has been processed whether you order on-line or by telephone and you will become a repeat customer like myself for all your trailer needs but never for the same thing twice unless it's for another project..(: I'm including some pic's showing the partial to the finished vent installation but sorry I did not take a picture of the plywood jig.

These were ordered to replace hail-damaged OEM spouts. They are superior because they extend further and do a better job of keeping the runnoff from staining the sides of my trailer. etrailer is my go-to supplier: Great pricing, fast shipping, tested and reviewed parts and the best options for replacements and accessories.

What can I say? This is a pretty standard item. Best price I found. This fit the channel well and looks better than the sun-rotted original. I have no idea how it will hold up, but am hoping for several years!

This purchase was a replacement for the exact vent that I purchased in 2020. Originally I gave this product a high rating. One year later as requested I updated my review noting the plastic had turned yellow, the locking tabs for the vent door required a ladder to operate and the vent flap was annoying as, unless it was locked, would clatter in the slightest breeze. This month 2023 I was washing the rv in preparation for a trip and I hit the center of the vent hood with a wash brush. The center "reinforcing" post broke off and the vent hood cracked. The plastic was not only yellow but now was also quite brittle. This is the third vent for the rv. The original 2006 Ventline lasted until 2020. The second 3 years. I purchased another as I was about to go on a trip and knew the replacement would be a no hassle install. etrailer expedited the shipment and generously waived shipping fees in consideration of the previous replacements short life span. I greatly appreciate their high quality customer service. The vent that I just received is, as other reviewers have noted, constructed of thin material and was apparently not trimmed after being removed from the mold. I will shop around before replacing with another Dexter Ventline again.

I ordered this replacement because one of the inner tabs was missing on my unit on my trailer. (this is the little swing ear tab to keep the vent closed). Upon opening the package the same tab was broken on the new one, (the snap in part on the tab was broken). I installed it as it is.

This is just the replacement need for the two vents on our 2006 class B+ motorhome. The original parts disintegrated under the punishing sun.

Hello etrailer! I dont always write reviews as services can be variable and the reason i dont. That said, etrailer ...nailed it ....again. I built out a pull through snowmobile trailer with beds, heaters, etc into a very comfortable all weather rig. Etrailer supported me then and again for our little Nash. This order was supported first with email info from Meriah V and follow up from George after order placement, order shipment and receipt notice of arrival. Great products GREAT customer service. This is great customer service! With this order, i purchased ventline replacement lids and fan-tastic vent-covers for our Nash. Easy install, great product. Allows us full open vent lids during weather or travel. Easy install too! Love em. Happy to know i have a go to company for the things i need for our RV. Will always stop in at etrailer first. Thanks everyone. Nick K.

Etrailer always comes through with parts we need at a Reasonable cost. Delivery is made when promised.

Fit perfectly... only took a couple of hours....

This Exceeded our expectations; we didn't know that this would have such an impact on how much air was moved by this vent fan. I was in, then out of the "Doghouse" for the cost of this (the wife did her own research after I had) and then the wait; the unit this replaced was leaking water as it rained outside. Within a week of ordering this it was delivered, and the following day I got it installed. Installation directions were very simple to understand/follow; the hard part was removing the old vent fan and caulk. Another "Bonus" was how quite this is compared to the original.

When they work, they do really well. Mine started squeaking loudly, so it has been returned. The designers of this model were kind enough to install a super bright green LED that shines when in auto mode, which is where most people will use it. You cannot shut off the LED unless you take it out of auto mode. If you like waking up to a green light, as in an alien spacecraft coming to pick you up for a free ride, then this is the fan for you. Otherwise, shop around because that light is really really bright! If it wasn't for the beacon that you cannot shut off, this would be a five-star review of a fan.

This fan has worked great for my motor home. If you need a stronger breeze, this may not be the fan for you.

Quick delivery and easy installation. My camper is a little older but this vent fan is an exact match. Bery happy with the removable screen for cleaning great feature the old vent didn’t have.