Most Popular Trailer Connectors for 2017 Ford Focus

Part was exact replacement for the broken trailer electrical socket I needed, at a price lower than I expected. Vendor has a good catalog of just about anything I could need for my trailer and will be using eTrailer.com from now on.

Simple plastic cover. Does the job. Time will tell how well the plastic holds up in UV light.

Just what I needed for my home-built bike carrier. My wife rides an e-tricycle and by the time I loaded the trike and a couple of bikes on this platform, you could not see the car's taillights or blinkers. This harness worked perfectly!

Used this to rewire a 6 x 10 trailer. Inserted the wire through 3 feet of metal conduit to keep it from being damaged near the coupling. So now the only exposed wire is the ¼ inch right at the connector.

on time as stated

Worked out well.

Sooo, bought another one to match my truck side connection as GM uses Pollak, which are known to not play well with other brands. The design is just a wire clamp to wire it, which I did with the first one, but trying to get it secured I stripped out the screw. There are no torque specs provided. I’ll move to crimped ring terminals on this one and dial back the torque a bit.

It served its purpose to convert 4 connection to 7 connection to make it compatible with Toyota 7 connection set up diagram which is different than many American or other 7 point connection. Thank you E-Trailer . 5 stars and it's working just fine 1 year out from installing.

Great product no issues at all. Product as described & fit properly.

Tough environment for these…need to keep a spare handy

I do not recommend this product. I bought this for my truck. It seems to be the nicest looking plug on the market but after the first rain, the plug was filled with water. I changed the location from the hitch to the bumper and once again the plug was filled with water after it rained. This condition will obviously lead to terminals corroding and/or wires being shorted out. I have bought a different style plug, unfortunately the same brand but hopefully I will have better luck. May be able to drill a small drain hole in the casing to allow water to escape but shouldn't have to do this on a new product.

I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.

The Roadmaster 4 wire connector is very good quality to connect my vehicle to motorhome.

We just finished a makeover of our 1995 boat trailer. New bunks, sanded and painted but the best part of the project was the new LED lights from your company. They are so much brighter than the old incandescent bulbs that you really do feel safer driving down the road. We pulled the 20 year old wire out and replaced with new and used the 3M scotch loks to tie in. We were not sure the new style grommets would fit the old holes in the frame but they fit great. Your customer service was great, alerting me to a backordered reflector but recommended a replacement that worked fine. Patrick set up a Q&A page for me since I had questions about the best way to protect connections with dielectric grease, heat shrink and tape. Your website is one of the best with ease of navigation, complete pictures, great selection and thorough info, dimensions, etc. You guys really have your act together and also offer great value. I would not hesitate to purchase again and will recommend you when I can. I have attached a couple of pictures. Thanks for all your help. Wayne N.

I've had this in use for over a year and they don't build them like they use to. I use this on a gooseneck trailer and the piece of plastic behind the spade connector for the clearance lights and brakes has melted, allowing the spade connector to lose contact with the plug on the pickup. So the lights would cut off in the middle of the night and would have to wiggle the connection till I could fix it. I have an older Hopkins plug and never had this problem. To fix the problem I ended up putting pieces of thin copper wire behind the spade and have done it twice since the plastic melted a 2nd time and once again the trailer clearance lights would quit working. Attached are before and after pictures.

Customer service was great, I called for help connecting the 7-way and they walked me through it. Shipping could be better

Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver

parts purchased from etrailer.com for my homemade cargo trailer

Heavy built. Very much wish it had a cable clamp on the backside similar to its male equivalent. As it is all the strain on the wiring/cable is supported by the terminals themselves.

I've never really liked Flat-4 type connectors. Unless you leave them dangling, they usually require that you crawl under the vehicle to connect them. (...Murphy's Law dictates that this will always be when it's raining or snowing). This Pollak 4-pole round socket, along with a Tow-Ready harness, and matching trailer connector, provides a neat, factory installed look, that's more convenient, and durable. My orders from etrailer arrived quickly, and with great seller communication. A+

Easy to assemble

Note to self: Always push brake pedal firmly before releasing parking brake. especially when Jeep is slightly uphill from Blue Ox tow bar. :-) This was a very quick fix, (unfortunately not quick enough, the wife saw me before I could hide it) maybe took 10 minutes total. A socket set and a small phillips screwdriver are all I needed for this replacement.

Working great

Great company

This is the second 7 pin molded plugs that I have purchased from you...The wiring is NOT standard,the color coding of the wires are inconsistent with American standards. You have to be an electrician to figure out how to wire it to the trailer. Clearly have purchased these from color blind Chinese contractors. It was a mess !

I had to replace the old 7 wire cable because the male plug had been pulled off. I chose the WH54006-043 coiled cable. I used a 1/2 inch clamp to hold the cable up at the box and a Connect-to-Protect to hold up the male plug. The result Is clean and tidy. Thank you,

Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.

Very sturdy and secure attachment, much better than the cheaper plastic ones that I have had break before. However, the rubber boot doesn't stay around the wire attachments

This is the product I expected and it arrived in factory new condition. To no fault of etrailer.com the currier wagon train and the ox’en that pulled the load were heading East. This was not the direction they were accustomed to so it took a few extra days. All in all good job I will do more business with this company.

I wish than all trailer wiring was color coded the same. I have wired a lot of trucks ant trailers and trouble shot problems and always solved the problems. this one gave some serious thinking since the wiring was color coded different. But it is working and I do like the Pollak plug.

The quality of the materials for this wire connector is very high, especially the insulation on the wires. One thing to note is the wire colors do not match the standard colors associated with this style of 7-Way plug. Definitely use a continuity tester to determine which wire goes to which blade in the plug. Other than that, this is a good product for the price.

Sealed unit at connector. No possible corrosion.

Works as it should. No problems.

I am going to use this to power my new electric boat winch. I have not actually loaded my boat yet but in getting it all set up this plug will work perfectly. I made a mount that will hold both this plug and the 7 pin plug for the trailer. I was surprised as to how stout these plugs are, look like very good quality.

Installed and tested and seems to work perfectly. To be perfectly honest, my vehicle was NOT on the list of those that this part will fit. But I saw on another post elsewhere that someone had had success with this and I thought it was worth the gamble. I just installed this myself in about 20 minutes, thanks to a YouTube video. The dealer is quoting 70 bucks for this part plus installation which I heard can be as much as $200 more. I just did it myself in 20 minutes for $18. Thank you so much. Check out my pics.

Packaged very well and delivered when expected. No defects noted with this products condition. I have not mounted the connector on the truck yet or operationally tested it but there's nothing to lead me to believe that it wouldn't perform as advertised.

I like this style of plug because it is molded and is important in keeping water out of the plug. It is conveint because it has the right colored wires. I have a water tight termination box with studs that it is wired into. Once I damaged the cable so I opened up the terminal box installed eyelet lugs on the spare pigtail, and installed it in a fiew minuets. I keep a spare on hand with lugs on it so if I have an accident I can quickly replace it. I also use these on some of my smaller tow behind equipment. that's why I like this size plug it isn't real bulky.

Built a new trailer to haul my bobcat mini track loader, all products purchased from Etrailer worked great, no problems

Also effing mint

Excellent. That the product I was looking for.