# 1
Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount
Swagman bike rack is very sturdy and provides a great platform for transporting my mtn. bike. The 2”/1.250” receiver allows me use rack on all of my vehicles. Easy assembly and as always, Great service from ETrailer... Thanks
This is a well designed rack. Adding and removing bikes is quick & easy. Just set the bike on & slide the padded hook down onto the bike frame to secure it; no straps required. If only one bike is transported, it does not interfere with opening the trunk on our Tesla Model 3. With 2 bicycles the trunk cannot be opened. For 2 bikes the Swagman model that can tilt might be worth the extra 22 bucks. This rack uses a bolt in the receiver hitch instead of a pin. This locks it securely preventing it from moving in the hitch & rattling. It also requires a wrench to remove it, good for theft prevention but one more thing to keep track of. For storage on the vehicle the top bar folds down. For storage in the garage, the left & right bars fold up & you can hang it using one of the hooks.
# 2
Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
Works for my fat tire bike. Once it's set up, it's easy to install and remove. I had to cut out some of the plastic cladding on the underside of my bumper on my 2014 Subaru Outback. Good value. I've had no issues.
GI love the Rack, it is easy for me to handle, (as a 89 yearold rider.), two bikes ride and fit very nicely. Like how it folds down,and how it folds to open the tailgate . Great quality for the money, I would highly recommend this rack
# 3
Swagman XTC2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
I was sent additional mounting materials that don't correspond with my hitch or my bike rack. See the photo below. Are these materials for my Swagman STC2 Bike Rack Item #S64670?
Very stable and simple to use bike rack that works great with my road bike AND with my 29" Big Rippers. It makes loading and unloading the bikes a snap and they are safe and secure for traveling once loaded and secured. I have already logged over a thousand miles hauling bicycles with this rack and highly recommend it. I am a big fan of Yakima roof racks but, honestly, wish I would have went with this setup for my bikes from the beginning.
# 4
Swagman Trailhead Bike Rack for 3 Bikes - 1-1/4" and 2" Hitches - Tilting
Sturdy bike rack, easy to install. Definitely need the tethering strap.
This is a replacement as old one was damaged during a deer collision.
# 5
Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gunmetal Gray
Fantastic bike rack. Switch it between a Honda Ridgeline and a Subaru Outback Wilderness and it works perfectly. Accidentally lost the locking pin that secures the rack to the trailer hitch and when I inquired with Kurt about ordering a replacement lock keyed to match the locking cables on the rack and the Kuat rep sent one to me for free. (I removed the rack and left the lock sitting on my car bumper. Later that day I drove off and lost the lock on the highway).
Great bike rack. It is easy to install the hitch on a vehicle and to remove it. The Kuat NV 2.0 provides a smooth, gentle ride for road bikes and mountain bikes. Great purchase. Highly recommend.
# 6
Swagman Upright Bike Rack for 1 Bike - Roof Rack Crossbars - Frame Mount
Great product for the price. Pretty easy to set up. Only issue I have is my mountain bike, which is an XL frame with 27 inch wheels, is pushing the limits of the base. Wish this rack was just 4-5 inches longer that way you have the perfect overlap amount in the middle without pushing the current frame to the limits. With that said it does hold my bike just have to find the sweet spot. But this fits my son’s youth bike perfectly!
As always with products I buy from e-Trailer, this item is exactly as advertised and works perfectly. Easy assembly, I bought 2 but only installed one until I check the fit with my rooftop carrier.
# 7
Malone Runway HM2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
400 miles and held up well. $1500 worth of bikes, so I stopped a few times to make sure everything was holding up. It did well! You can decide which way to put the “hooks” that go over the frame onto the rack when you assemble it. This will eliminate the problem of not being able to secure both bikes if one frame is lower. It’s also heavy as heck (with the bikes on it) to tilt to access the cargo in the hatch. For me, I can handle it...for my wife, not so much. Don’t plan on getting to the cargo unless you are strong and have a good back.
The swing arm came with the predrilled holes for the lock pin off by about half an inch, so I had to drill new holes. Even then, the hole for the pivot point also seems slightly off. Once I got new holes drilled, it holds on nice and sturdy and doesn't knock about while driving. The locking mechanism, while clever, seems flimsy. Might just be for preventing crimes of convenience.
# 8
Curt Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
I received the product in great shape. Very easy to assemble. Will be taking the family for bike rides at the beach, and the parks.
Nice bike rack ! Saddles are well made and none of the ears that hold the straps in place have broken like they have with other brands I've owned. It came with 1 strap for each saddle and the straps seem just a tad stretchy. I looked on line and found that Home Depot has a good price for the straps so I now have 2 straps on each saddle. I've got it on a 1&1/4 hitch, but it came with an adapter for a 2 inch. It holds 3 road bikes. I used it all the time.
# 9
Thule Passage 3 Bike Carrier - Trunk Mount
This is definitely more of a 2 bike carrier vs 3 bikes. I had to take the front wheels off two bikes to get three bikes on this carrier. Also, it rubbed the paint off on the trunk of my Subaru legacy.
Way too light duty for what is advertised. It seemed to be made out of 1/2 inch electrical conduit. I would never put three bikes on that rack. I only had two bikes on the rack. While on trip through Idaho the wind was so strong that one of the bikes partially blew off the rack. We traveled 1,800 miles and upon arriving home I actually sawed the bike rack up and threw it away so that no one else would use it and cause an accident. I've already found a different brand that is HEAVY DUTY and I will stick with that brand.
# 10
Curt Clamp-On Bike Rack for 3 Bikes - 2" Ball Mounts
It broke, (the tension handle snapped off) the first time I used it, which was 45-60 days after I purchased it. Nether Curt nor etrailer provided any warranty relief since it was 30 days post sale. It's in a landfill now, and I won't buy from either company again.
A frustrating experience. I bought this bike rack hoping that it would be a really good fit for our needs. We went on a road trip where we were going to camp as we went. Towing a small trailer I mounted the rack on the back of our Honda Element. I had trouble getting the bikes (two) to ride high enough off the road. On the first day of the trip I had to stop at a bike shop to replace a tire that had melted as it had been rubbing on the tailpipe along the way. I also had a major challenge connecting the rubber straps because they were so stiff. Now, I am getting older and just don't have the strength I had in my younger days, but still I just think they are too stiff (I wasn't the only one that had trouble getting these things on...we finally got them on between me, my wife, and the bike tech). It ended up being a frustrating trip. We ended up not using the bikes due to the difficulty we had adjusting the rack. Sorry for a poor review. It is partially my own fault because I could have chosen a different rack in the first place.
# 11
Saris Bones EX 3 Bike Rack - Trunk Mount - Adjustable Arms
Truly a great product! The bike rack is a huge improvement over the one it replaces. I had lost confidence in it, as it was always loose and sloppy when in use for long distances. The materials are high-quality, with very dense plastic arms, a metal main tube, and strapping that can be pulled quite tight. Overall a very solid piece of equipment. Each bike has three points of attachment, which keeps them very stable. The ratchet mechanism is much easier to manipulate when compared to web straps, which always seem to work loose, but are difficult to work with when removing a bike. The feet, which get placed on the glass and in the license plate well on my Subaru, are flexible and substantial. When placed according to the online fitment guide, I can still use my backup camera, at least when no bikes are on. I can also drop the arms easily when not carry bikes, and storage off of the car will be very easy. For my wife's step-through frame, I acquired the Saris Bike Beam, which makes placement on the arms very easy, and seems to be very stable. These products are clearly well engineered and manufactured. Great customer service and fast shipping from Etrailer combine for a great purchasing experience. I highly recommend this item!
Great product so far! Easy to install and adjust. A little tricky to load 2 large handlebar mountain bikes and a third smaller bike, but we just turned them sideways with the front wheels taken off. We had racks on bikes which were probably the impediment. We got them on though! Love how it folds up easy for quick storage. Works great on 2014 Subaru Outback.
# 12
Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting
I installed this rack onto a Curt trailer hitch which is mounted onto a 2017 Honda Fit. I have been using it intermittently for several months, probably about 5 times with one bike and twice with two bikes. I give some pros and cons below and then elaborate. Pros: easy to assemble, easy to mount and dismount bikes, easy to lock and unlock, how to put the rack into different positions is intuitive Cons: inconvenient to put the rack into different positions, inconvenient to mount the rack onto the hitch, rack protrudes about 15 inches from bumper when in flipped up position (seems very vulnerable to someone backing into it in a parking lot, very inelegant looking I say the repositioning is intuitive because there is really only one way you could possibly place the pins for each position. But removing and replacing two pins is much less convenient than turning a knob or a lever, like some racks do. Also many racks fold and flip in such a way as to look very unobtrusive when in non-use mode. This one looks like kind of a monstrosity. That does not really bother me but it might bother some owners. The part that does bother me is how far it protrudes from the car. I back into parking spaces whenever possible to avoid someone bumping into the rack and damaging it (which happened to a friend). My number one suggestion for Curt is related to mounting the rack onto the hitch. Make it easier to tell when the holes are lined up so that the bolt/pin will fit and thread. As it is now, if you insert the rack as far as it can go it is way too far in. Ideally, it would be exactly lined up. Failing that, maybe some kind of click or other feedback to know at least that you are in the neighborhood. It would also be great to have an attaching device that is easier to fasten and unfasten than is the bolt/pin. Tip for mounting the rack onto the hitch: I assumed that it would be awkward to hold, what is it 46 pounds?, while trying to line up the rack probe with the receiver. If you have a garage with exposed collar ties, my solution could work well for you. I looped a cargo strap over a collar tie. Then I hooked both hooks of a bungie onto that loop. The idea is that you hook one of the bike frame holders of the rack onto the bungie, suspending the rack a few inches off the garage floor. This takes most of the weight of the rack so that you can just pull up or down and forward until you line up with the receiver. Tip for mounting bikes. Don't put the little screw into the post that prevents you from completely removing the bike frame holders. Remove both holders. Position the first bike, slide the holder into place, position the second bike, slide the holder into place. I found this makes it much easier, because you avoid parts of the bike hitting the holder as you are trying to get the wheels into place. The trick is that if you are mounting only one bike, don't forget to put the second holder back on - or maybe just stick it inside the car right away.
Have used mine several times in the past 2 years on the back of a ‘21 Honda Pilot and a ‘19 Ram 1500 Classic. I really like that the platform will tilt downward allowing the Pilot rear hatch to open with no interference. The tailgate on the Ram doesnt open fully even with the platform tilted downward, but that is a Ram problem & not a Curt problem. Was well worth the money.
# 13
Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount
Excellent bike rack. Easy to put together. Fits perfect with the etrailer curt hitch. This is a heavy duty bike rack, which also means it heavy but still manageable. Using this for my Aventon Ebike.
This rack is heavy, easy to assemble and has zero wobble. The reason I purchased this rack was due to the quality of the rack, but also my last experience with trailer. Great customer service, and if you have a question, it's pretty easy to get hold of a real person! I actually purchased this for an Ebike.
# 14
Yakima EXO Swing Away 2 Bike Rack w/ Cargo Carrier - 2" Hitches
Perfect for my needs, 2 bikes load easy and are secure. Gear tray is perfect dimensions for cooler and gear bags.
This thing is well built and Heavy! should work well for my needs. definitely have to load heavier things on the driver's side as it is off center and tilts to the passenger side when not loaded with gear. I also got the tabletop which now I realize is useless for my application. I am using this on my truck with a truck camper in the bed. this makes the table attachment shoulder high. wheels for the wheel kit at pneumatic and flat so I guess I will have to add air every time I intend on using them, I thought the description said they were solid wheels, but I must have read something wrong cause they are definitely phonematic.
# 15
Hollywood Racks Destination Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
I am very pleased with this hitch! Fit my bikes very nicely. Easy to assemble. Rack looks great on my Mazda cx-30. Customer service is very responsive.
A very good, inexpensive, lightweight bike rack. Folds nicely and doesn't interfere with the hatch opening on our 2023 XC40. I wouldn't consider this a heavy duty rack, more suitable for short trips to the riding trails. Good for urban living, as opposed to 4 wheeling out to a mountain destination. Several plastic components. Two things I dislike is 1) the hitch pin lock is cheesy plastic, and because of the threading bolt on the rack's hitch, you can't use a sturdier 5/8" locking pin. and 2) the cotter pins should have a small security cable.
# 16
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gray
We love this bike rack for its ease of use and solid construction. Bikes are quick and easy to load in and lock down tight. The hitch-receiver tightening system works great for a wobble-free rack and the hinge and locking lever work smooth and solid. It looks nice too.
So after much research into bike racks, I decided on pulling the plug on the Kuat Sherpa 2.0. I've looked into the Kuat NV and other brands, but they were just too much for my needs. If you've got "regular" bikes and not the heavier eBikes, then this rack is perfect. I wanted a hitch rack that was user friendly and not overly complicated. I have a mixed bag of bikes and this rack can handle them all, from mountain bikes, street bikes, and BMX bikes. I like that this rack comes with an adapter piece for 20"-24" wheels. Assembly of the Kuat Sherpa 2.0 is really a no-brainer. I think it's only 4-5 bolts really. Everything else is ready to go. The anti-rattle hitch ball mechanism is simple to use with just a twist of the dial, easy. The tilt pedal/lever is also easy to access should you need to open your hatch, a solid "click" assures it's in place. So far, loving this rack. Fit and finish is superb. Thanks to Jerred and etrailer for answering my questions, always helpful.
What our customers are saying:
"I ordered a trailer hitch and a bike rack carrier the order was shipped with in three days. To put the hitch on only took about 30 mins. only had to drill two 1/2 holes. fit like a glove."