# 1
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
New suspension parts made a real difference in trailer handling. Original shackles holes were severely elongated, spring eye mounts were also needing attention. Thank you, etrailer for the needed parts and support.
These parts were a perfect replacement for my old rusted u bolts. I would recommend buying flat and lock washers to place on the u bolts under the nuts due to the holes in the plates being big enough that the nuts get a little torn up when you tighten them, also the nuts it came with aren't lock nuts.
# 2
Dexter Trailer Springs Over-Under Conversion Kit
This product did exactly what we needed it to. Bought a replacement axle from Dexter but it created clearance issues in the wheel wells. After installing this kit we have much more clearance and the trailer rides like a dream.
Outstanding product. I am so grateful the install video was added to the page. I am a hands on individual and struggle reading directions with numerous steps at times and it made it so much easier to install this. The explanation of how the mount has to sit flush with the axle seat once you tighten down the spacers was very helpful during the alignment stage. I still have to weld the brackets to the axle for extra support as recommended but I did notice that I will be gaining roughly 4” of clearance height to my trailer. This will allow me to sit more evenly with my lifted truck and get my trailer in my driveway easier since I have a water drainage built in to the entrance way with a big dip.
# 3
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
Dexter kit looks and feels robust! Can’t wait to put it on and see the results. Did have one of the shackles that would not fit and Etrailer customer service was Awesome! Sent what I needed right away. Will be buying from Etrailer again!
Upgrade for my trailer with worn bushings and no lube points. The rubber on these equalizers along with the wet bolts and bushings eliminate the squeaks and creaks on my trailer.
# 4
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
Excellent products are only sold through e-trailer. I trust them and will continue to purchase through them for all my trailer needs. Thanks!
Looked under my trailer and the u bolts and plates wer rusted away, it's an old trailer so I had no details like make or model number. Called and talked to Kelly S. She was very knowledgeable and overly efficient! Got my parts super fast, the u bolts wrer very thick and the plates were even thicker. Quality parts at a good price. Would highly recommend and a big thanks to Kelly
# 5
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
Exactly what I needed, such an easy upgrade with new heavier springs and the wet bolt upgrade kit. etrailer techs helped answer some questions to be sure I got exactly what I needed.
Replaced 50 year old u Bolts on my horse trailer. Fit like a glove, no issues with install and everything fit as it should.
# 6
Torflex Lift Kit - Tandem Axle - 2-7/8" Lift
Just had these installed on our 30' Airstream Globetrotter and it looks great. The extra lift gives us the ability to explore more BLM areas and boondocking opportunities.
The package arrived with a tear and the hardware bag busted so a washer was missing. Contacted trailer and they sent out a replacement right away.
# 7
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
This trailer sees some use off pavement. The added ground clearance provided by the kit is very helpful. The lifting blocks are well constructed and the hardware is high quality. Installation was straightforward, but great care must be taken when lifting the trailer off the ground to remove the axles and also to ensure that the new fasteners are tightened properly. Not a job for inexperienced mechanics.
This kit arrived packaged very well and exactly as described. Inventory of included parts complete. It will be a straight forward job to install and solve my problem of having the trailer too low at the rear since I can't lower my hitch any further. I recently replaced both 20 year old Dexter #10 Torflex axles with 10 deg down vs 0 deg down spindles. I am glad for the improved ride instead of basically a solid axle, but still needed this kit to solve the angle of the trailer because I'm as low as I can go with my weight distribution hitch at the ball.
# 8
Torflex Lift Kit - Single Axle - 2-5/8" Lift
Perfect fit for the 2020 Geopro 19FD with the 3500# torflex axle. This resolves the issues with bottoming out on any road ramp angles and the ultra low tank discharge ports. The parts are really well made and the installation is simple. Be prepared for the 150 ft-lbs of torque on those bolts. (Always use a torque wrench!)
Straightforward instructions, only had to extend wires on my 2022 E-pro bunkhouse. Follow the instructions to the T and it’ll take a handful of hours. I’ve lifted a jeep and two trucks, so have lowered axels before, this was a piece of cake. Had to also adjust my equalizer hitch but after having two busted pipes from traveling, hoping this keeps them away from those deep potholes. Only time will tell! I installed on my own and love the result! Before and after lift pictures attached.
# 9
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
The Dexter Heavy-Duty Suspension Kit was an Exact Replacement, and a Perfect Fit for my RV Trailer. They were a much more substantial replacement for my factory parts. The bronze bushings, and wet bolts will definitely help my suspension last a long time due to being able to lubricate all of the bushings and pivot points, which will ensure worry free traveling.
I would have given a 5 if the zurk fittings were better quality, one grease (zerk) fitting was damaged and missing the ball, so I had to get one from the hardware store. Put better grease fittings in and there wouldn't be any complaints about not taking grease.
# 10
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
Looking forward to season opener trip! Not that many miles on TT, and am shocked at condition of original plastic bearings. Image shows worst 3 of the 8 removed. The other 6 I didn't drive out of the triangular pieces. Admittedly, I'm retired and not in a hurry but took a total of 7 hours to install both sides including break for lunch and total clean-up of tools. Not a difficult install if you have basic mechanical skills.
After installing the Dexter easy flex and traveling around 7K mile. We are well pleased with the performance. I would recommend the product.
# 11
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
Use these to rebuild the used trailer I have and with the new wheels she tracks and goes like new thanks for all the help, first trip 1000 mi round trip to pick up my new ride road fantastic thanks again
Compared to the original suspension parts that came off my trailer, these Dexter heavier duty suspension equalizer and shackle with treatable bronze bushing kit seems to be a major improvement. The shackles have double the thickness than original.
# 12
Dexter Trailer Springs Over-Under Conversion Kit
Kit worked as intended. Raised my fifth wheel high enough to get proper clearance over bed on new truck 3" Axle tube 2.5" Spring stack gave me 5.5" of additional height. I also added bump stops on top side just in case a spring breaks.
Jaime at ETrailer was extremely helpful and got my order sent up ups ground since I was having issues using a P.O. Box. My parts arrived quickly and fit perfectly. I installed them last week and my trailer looks so much better and won’t be scraping on my driveway anymore!
What our customers are saying:
"You folks are fast. Thank you very much."