# 1
Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!
This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.
# 2
RoadMaster 4-Wire Connectors - Trailer and Vehicle Ends
I periodically pull a 12v pressure sprayer behind my lawn tractor. The 12v harness I originally made that clipped to the tractor battery was always cumbersome and became hazardous when it recently shorted out due to rubbing (and no fuse in line). So I finally took the time to do it right, mounted this connector to the rear next to the taillight, and created a hidden fused permanent harness to the battery, and of course utilized the mating connector for the sprayer harness side. This little connector was perfect, high quality materials (connector body and electrical terminals), high spring force on the cover when not in use, nice sealed design yet easy to plug/unplug. Very happy with this purchase and will likely buy it again.
This is not a real easy thing for do it yourselfer. However with the resources provided, if you are ok using tools and are able to watch a video showing step by step you and can do this. The base plate and towing system has been perfect.
# 3
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Vehicle End
Great to find metal socket rather than plastic.
Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver
# 4
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket - Metal - Vehicle End
I've never really liked Flat-4 type connectors. Unless you leave them dangling, they usually require that you crawl under the vehicle to connect them. (...Murphy's Law dictates that this will always be when it's raining or snowing). This Pollak 4-pole round socket, along with a Tow-Ready harness, and matching trailer connector, provides a neat, factory installed look, that's more convenient, and durable. My orders from etrailer arrived quickly, and with great seller communication. A+
Excelent Quality! Parts was a perfect fit for the factory location.
# 5
Pollak Heavy-Duty, 4-Pole, Round Pin Socket, Concealed Terminals - Chrome - Vehicle End
Items were simply “thrown in the box” WITH the hitch which was not secured properly. Heavy hitch then bounced around on electrical connectors, destroying them. Components should have been fastened to the hitch as the hardware kit was with strong tape instead of just thrown into the box by somebody! Refund issued.
Product arrived on time and as described. I used this for setting up our 2014 Wrangler Unlimited Sahara for a flat tow. Mounting hole spacing @ 2" o/c didn't match our Blue Ox 1126 draw bar so I fabricated my own intermediate bracket, polished it to aircraft tooling standards, then lacquered it before final assembly. I think the finished product came out nice.
# 6
Quick Fix (TM) 4 Pole Flat Car and Trailer Ends
They have just what I needed and it arrived very quickly.
I have used etrailer probably four or five times now and have been very happy. Shipping is fast, prices are reasonable and the products are of good quality. I purchased more of the Quick Fix 4 Pole Trailer Ends - they work really well for the non-automotive industrial control project I am working on.
# 7
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Connector - Metal - Trailer End
This is a good product. It is sturdy and connected easily.
Great place for any trailer needs. They alway gave what I want at a good price and fast shipping.
# 8
Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End
Quick shipping, will order from them again!
Exactly what I needed and It's a great fit
# 9
RoadMaster 6-Wire Trailer Connector - Trailer End
etrailer videos make things so easy! Thank you!
Worked fine.
# 10
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)
Very easy install. My truck had a precut hole in the bumper for the plug. I then hooked the spare 4 pole plug into a Reese Universal mounting bracket and mounted it onto the hitch.
# 11
Adapter 7-Pole to 6-Pole - Universal
We had been having trouble with our other adapters, no brakes or intermittent brakes. This adapter fits better than any of the others ever have, great connection and is holding tight. I will be picking up some more of these. The only downside to me was they came on the value shipping which is rather delayed for us and I would rather pay to get it here more quickly. I was needing it and it was several days getting here. We ship a lot and I know shipping directly with USPS goes faster than that and is not expensive.
Added the gooseneck trailer plug in bed and I wanted to be compatible with new and old style plugs. Adapor worked great.
# 12
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.
Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture
# 13
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!
i had to replace these two items as my dear daughter went down our goat path driveway too fast. they replaced the originals from etrailer from the prior year. shipping is timely and customer service actually helps! i wired from battery to controller to hitch myself, and everything fit.
# 14
Pollak 6 Pole to 4 Pole Connector Adapter
Works really well.
This product wooks great. I will do business with this company again
# 15
Pollak 9-Pole, Round Pin Trailer Socket - Vehicle End
Looks great. Problem is I need to return this because I can not find 9 wire cord.
I was searching all over the Dallas/Fort Worth metroplex looking for a male 10 pin connector to mate to a 10 hole connector on a 1992 Holiday Rambler 5th wheel trailer. I spent two days going from RV stores, trailer businesses looking for the 10 pin connector. All the stores didn’t have the part or the weren’t interested in helping me. I finally ran into a gentleman who knew that a 10 pin connector existed but they didn’t have one. He directed me to etrailer and they had one. They shipped it to me and I got it in two days. Great service from sales to check out to shipping. Great Job!
# 16
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Exposed Terminals w/ Rubber Boot -Vehicle End
Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.
The documentation for wiring is limited and difficult to read without magnification. Otherwise this is well made and works perfectly.
# 17
Adapter 7 Pole to 4 Pole with Tester and Cover
ETrailer had exactly what I wanted at a fair price. Website was easy to navigate and purchasing was simple. Shipping was fast and I was kept notified right up to when I received my order.
Plugs in easily, shows that pins are producing voltage, and locks in place using the spring loaded door to the 7-pin.
# 18
RoadMaster 6-Wire Connectors - Trailer and Vehicle Ends
This was easy to install looks great and works excellent. have had on issues with this product my trailer lights are always working and keeping me safe.
Installed a Blue Ox Base Plate kit on a 2015 Cadillac SRX. The base plate arrived promptly and was well packaged considering its weight. Watched the videos etrailer provides and used them as a step by step video guide. The videos were a big help. Installation is not too difficult if you're mechanically inclined. Had someone help with the installation but one person can perform the installation. I think the base plate is well engineered and everything fit as it should. Love the fact the installation is so well hidden. We have about 400 miles on the installation and have had no issues. Thanks to etrailer for a great price, great service, and great product support.
# 19
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
very happy with product and service
What can you say about a 4 pin connector, It was what I needed and it was a good price.
# 20
Adapter 6-Pole to 4-Pole with Built-In LED Tester and Cover
Connector addapter was delivered very quickly. This was exactly what I needed to connect a cargo trailer to a previously installed Pollack boat trailer connector on my truck. It worked great and I am very pleased.
Good product. Easy to use. I use it to plug my magnetic lights on my tow car. Works good.
What our customers are saying:
"very easy to shop"