# 1
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
Works great every time I use it
Overall everything has worked as it should. My only complaint would be that I have pretty much always had some wobble/looseness of the drawbar in the receiver. It is actually audible when driving. I was in the process of buying, and selling a house when I installed the trailer hitch, so the issue was overlooked due to the complexity of the move. I guess I learned to live with it, and hope it doesn't ever cause a failure.
# 2
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
I bought my hitch not for towing but to protect my bumpers from scratches. Everything came on time, fits as advertised and I might even actually tow something now that its on.
What can you say about a good piece of hardware. As for service, it was prompt and accurate!
# 3
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Works great every time I use it
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 4
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
works like a charm
# 5
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
Looks great, high quality all the way.
Look and quality of the mount is awesome. Beefy in size as well. If using on my particular application, removal of rear diffuser is necessary. If they had extended it another inch it woulda been perfect. 2015 Audi a3 tdi. Wouldn’t let me add a third pic but it’s a finger tip space between the ball and bumper with diffuser removed.
# 6
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
It's great, looks good on my 2006 Scion XB. Gives the trailer hitch tongue good ground clearance since my trailer hitch is lower than most regular small cars, I wish I had bought it earlier. It's cheap and of good quality and makes my car look professional and ready for work hauling whatever.
Perfect drawbar for my lowered Scion XB !!!!
# 7
Curt Class I Drawbar - 5" Rise - 9-9/16" Long - 2,000 lbs
Works great every time I use it
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 8
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
Works great every time I use it
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 9
Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
I used this on a 2014 Ford Fusion with a Reese receiver hitch made for my vehicle. Either the neck of the drop hitch is not long enough to get the ball a few inches away from the vehicle or the Reese receiver hitch sits too far under the vehicle.
Untried as of yet but looks like a quality product. It's difficult to provide an accurate review of a product one just received, but I was very impressed at how quickly my order arrived (days before the expected arrival date), as well as the ease of ordering, the price, and the follow up.
# 10
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs
Looks great, high quality all the way.
Perfect for my Honda Fit as it has a low carriage, the Euro shape gave me a few extra inches to tow a small trailer across the country from Oregon to North Carolina with no issues.
# 11
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
Works great every time I use it
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 12
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
Looks great, high quality all the way.
My order got messed up several times. From USPS lost in shipping, wrong part ordered, wrong amount ordered (my fault), wrong part number (printed on label from manufacturer) etc... In the end etrailer managed to make it right!
# 13
Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs
Works great every time I use it
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 14
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
I bought my hitch not for towing but to protect my bumpers from scratches. Everything came on time, fits as advertised and I might even actually tow something now that its on.
What can you say about a good piece of hardware. As for service, it was prompt and accurate!
# 15
Drawbar for Curt Vertical Trailer Hitch Recievers
This drawbar is totally awesome. It saved my trip. The original drawbar was too short for my trailer to clear the chrome accessory on the bottom of the rear of my 2005 goldwing. This product is expensive but well worth the purchase price. It has the perfect angle, length, and clearance Thanks a million!!!
Works great. I used it make my own 2inch receiver because they didnt exist. But I have gotten a lot of use out of it with zero issues.
# 16
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
Works great every time I use it
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 17
Curt Class I Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 2,000 lbs
Works great every time I use it
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 18
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 2-3/4" Rise - 3,500 lbs
Looks great, high quality all the way.
Very nice product! Appears like the European models. That is what I was looking to obtain. Will be used for show on my 1957 Triumph TR3.
# 19
Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs
Works great every time I use it
The hitch fit perfectly and the wiring kit was easy to install. I used a class II hitch on a 2014 Scion xB with a Curt T-Connector 4-Pole wiring kit. I use this setup to haul an 4' x 8' harbor freight trailer and can easily make runs to home depot with loads nearing 1000 lbs. I don't miss my truck at all now.
# 20
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
Delivered missing the retaining clip
Keep with spare tire out of weather to prevent rust.
What our customers are saying:
"very easy to shop"