Summer Starts Here - Save up to 70%
# 1
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 2
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 4
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 5
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 6
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 7
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 8
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 9
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 10
B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 11
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 12
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 13
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 14
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 15
B&W Ball and Safety Chain Kit for Ford, GM, Chevy, and Nissan Titan XD Underbed Gooseneck Hitch
Nice gooseneck ball. Fits my 2024 gmc 2500HD perfectly.
hitch seems a little loose in the socket, have not hooked trailer to it yet to see if it bangs around. going to love having the handle so your hands dont get greasy.
# 16
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 17
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 18
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
2007 Toyota TundraAwesome product and easy install! 2007 tundra pulling ultra light weight 5th wheel.
2007 Toyota Tundra DC 6.5' Bed Follow the instructions. I had the cross-members and cross-member braces turned the wrong way and thought I was in BIG trouble with the hole lining up with the center section. The kit is well put together and has EVERYTHING you need for the install -tools. Make use of the "Overhead Lifting Device" mentioned in the very beginning. This makes it much easier to get bolts installed in the center section and cross-members. I just tied a rope to the latch pin in the ball socket and wrapped it around a truss in my garage. The heat shield removed in step 2 will not be re-used. Have a small 1/2" drive drill on hand. My 4" hole-saw and 1/2" bits would not fit in a 3/8" drill chuck. I had to use a ginormous Makita hammer drill which made it more difficult particularly with the 1/2" holes for the safety chain u-bolts. Would highly recommend this kit. Everything is well built, well documented, and complete.
# 19
B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch
This is more for the etrailer people - Super helpful customer service. Thanks to everyone to helped me find the right ball and safety chain kit for my truck. I ended up having success with the Curt brand and you made the return on the B&W smooth. I appreciate the help, felt a bit more like I was shopping locally with people I knew, instead of online. Thanks again,
I previously owned a B&W hitch in my last truck which was awesome quality. I got my new truck with the factory gooseneck prep and it was a no brainer to order a B&W ball for it. The quality is amazing and it arrived days before it was supposed to.
# 20
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Great hitch! I put this on my 2021 F-150 LB to tow our 10k lb fifth wheel and it worked exceptionally. I love how the ball can hide away to let you use the full bed for other things. Took about two hours to install, including cutting the holes and painting them. You'll want two people for this install. I paired this with an Anderson Ultimate Connection gooseneck hitch and Roadmaster Active Suspension system and my little 3.5l V6 1/2 ton towed this trailer with ease.
The hitch is great, the directions were easy to follow and was an easy install.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."