# 1
24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs
The rack is much bigger than my previous one. I was disappointed that it was made in China instead of the USA. It assembled very easily and the light kit works very well. The only draw back is I can no longer open my tailgate with the rack installed due to the spare tire hitting the raised rack.
This a very nice hitch rack. Well built, lots of space, long hitch tube works very well with Jeep Wrangler JL spare tire, however, you will not be able to open the swing tailgate with the rack on. Its not a big issue as it provides a good amount of clearance to the ground. If you use this carrier with one of the hitch rack cargo bags, it really adds to the cargo capacity of the rack. I have been very happy with this rack, I also like that you can add additional tail/brake lights to the rack.
# 2
24x27 TorkLift Lock and Load Maximum Security Cargo Tray for 2" Hitches 500 lbs
I bought this to carry a Westinghouse igen4500 on the rear of my 5th wheel. So far it's been perfect for the job. The quality is very good. The carrier is sturdy and is highly adjustable. I searched for a long time for the smallest carrier that would fit my generator with the greatest weight capacity. The TorkLift, while a bit expensive, fit the needs perfectly. I had extra reinforcements welded from my trailer frame to the hitch point, added an anti-rattle receiver lock and we now have the perfect generator carrier solution. Hope this review can save others time in their search for the same kind of solution.
My new Cummings Generator was too large to store in our 5th wheel and too heavy to load and unload in the bed of our truck. With the 500 pound capacity and the 2" hitch, the Tork Lift was the perfect solution. The generator fit perfectly, the heavy duty steel construction is amazing and the installation was simple. THANKS ETRAILER and TORK LIFT for the LOCK & LOAD UNIT!!
# 3
19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs
Purchased this 1 year ago. Worked awesome for a 9.000 mile cross country trip with three off road adventures at geology tour road Joshua tree, west side road Death Valley, and kingman wash lake mead. No rattle, always secure, great clearance. Would purchase again.
It works, but I only put two electric bikes on it. The mesh seems to bend pretty easy.
# 4
Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long - 500 lbs
I can't say I'm entirely happy with my purchase. The instructions were more confusing than helpful. Note in "instruction.jpg" photo of STEP 1 that the text says to put the 8 small bolts in from the inside first, but the drawing clearly shows them as going in from the outside. The last step says to place the ramp onto the receiver as shown.... glad I didn't throw away the box because there is no drawing that shows ramp installation. Actually, the photo on the box was more helpful than any of the instructions. Also, I need to make a trip to the hardware store to buy longer medium bolts because the ones that came with the carrier were not long enough to fully engage the self locking feature of the nylon lock nuts. At a minimum a couple of threads should protrude beyond the nylon. See photo "nut.jpg". The bolt threads don't reach the end of the nylon, so the self locking feature is not fully engaged. I did tighten the nut, but that was as far as it would go. I think once I get back from the hardware store with the new medium bolts and after I reverse the 8 small bolts (I followed the drawing and not the text of the instructions), I'll be OK with the carrier.
"Instantly Get Rid of Wobble and Upgrade With Lights" This is not a 5 because ramp should be longer & there should be some type stabilizer to temporary hold bike while strapping down, I'd pay more for those upgrades. The wobble can instantly be solved by hooking Tie-Straps closest to vehicle directly to the receiver where you hook your chains, rather than hooking them to the provided holes on carrier itself. You of course use the provided strap holes ones on the opposite side. When strapped down as stated, the carrier now becomes one with the vehicle & @ 80mph there is no wobble. (*TIP: Put ramp back in its place before strapping down or else it won't fit with the strap hooks in the way.) I upgraded mine with lights for both safety reasons & not needing the Police any reason to pull me over. It was very simple and cost me nothing but time & maybe $50. I recommend this product whole heartedly.
# 5
32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs
I received the package in a pretty rough exterior condition but everything was fine inside. The previous comments about having to cut away the expanded metal flooring in order to install the carriage bolts wasn't true in my case. Apparently, this quality control issue has been addressed by the manufacturer. Assembly went well and wasn't complicated. A different carriage bolt with a longer square shoulder should be used. The shoulder doesn't grip too well to the square cutout in the frame and even while pressing firmly on the head of the bolt, it wanted to turn as I was tightening the nut. All in all, it seems to be a solid product and I look forward to using it.
I wish the load capacity was a bit higher, but overall I am satisfied with the cargo carrier. It is perfect for lugging my two dog crates behind my vehicle instead of inside the vehicle. Thank you for offering a dimensionally larger cargo carrier than most retailers.
# 6
24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
We just installed our carrier. We love that this is going to free up a lot of space for our vacation traveling. Very heavy duty and bigger than i was thinking it would be.The pin that holds the carrier in the hitch was not included. It would have been an added bonus if it was.
This cargo carrier fits perfectly behind my 2023 CR-V. I use it for hauling bags of grass to the yard waste. It is almost a two person job inserting it into the receiver though. Seems well made and well finished.
# 7
20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
Great design and sturdy. I got two hitch pin stabilizers for hitch and folding pin and it worked awesome. I use it for storage for cab over camper and the carrier fits flush with open tailgate. Carries generator water fire wood and I use it as a step to get into the camper.
Bought for my 2020 XC 40. I’ve taking it on several long distance hauls and it’s frees up a lot of space inside the car. I love that you can open the trunk and get items while having the carrier on. The car handles very well with is on. However I would suggest you buy a hitch stabilizer to stop rattling it make the car a carrier act as one. It folds up when not in use so nothing sticking out when not in use.
# 8
20 x 59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
Great quality and serves its purpose. I wish I ordered the slightly bigger one to fit the bins and items I use it for. For example, a white standard igloo cooler doesn’t fit the way I need it to maximize loading capacity. I highly recommend a stabilizer to prevent wobble.
Very nice quality. Took one person and two wrench about 15 minutes to install the cargo carrier from box. It is very sturdy and the finish is very good. I really like the added height this specific carrier provides.
# 9
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
I've been using this Cargo Carrier on my 4 Runner Venture for about a year now. I Purchased this item to haul extra gear to Nags Head from Northwestern Virginia. Installation was a breeze and it's very, very sturdy. I had two Yeti coolers packed with ice and drinks and there was no wobbling at all. I'm a 197 pounds and I was standing on it after I installed it just to check for durability and this thing is a beast. I also used this as a rod holder while on the beach and I caught a 6 foot black tip shark. Overall, I'm very pleased with this item and I would recommend to a friend.
This is a substantial, well-made product at exactly the size I needed - smaller than many, and with sides that keep items secure. It was very easy to assemble, with all parts included and clearly sorted, and with all pieces manufactured to cleanly align. The item arrived promptly, packed to protect the shipment but without waste. I highly recommend this for anyone looking for a high-quality cargo carrier.
# 10
16x21 TorkLift Lock and Load SideKick Cargo Tray for 2" Hitches - 200 lbs
Just what I was looking for. Wanted to carry a small Honda generator and skinny gas can. I tilted the "Y" shaped security bar away from the vehicle by putting more washer between it and the carrier. That moved the generator enough to fit in the skinny gas can.
Very good quality for different types of generators. Again, I would’ve gave it five stars if it wasn’t for the price. But it is very well quality.
# 11
23x59 Stromberg Carlson Cargo Carrier for 2" Hitches - Steel - 500 lbs
Carrier and box will be moved to hitch on 209 Solitude Rv to provide extra cargo carrying ability
A good size and very strong. I like the fact that it has a grated bottom, as opposed to a few bars like many of its competitors. There are many holes and notches present for any customization desired. Also makes for a great chair to relax. I also ordered the anti-rattle pin so as to fasten this tightly to the hitch. IMO that should be included with any of these trailer-hitch-Mount accessories.
Curt 24x60 Hitch Cargo Carrier Review - 2004 Ford F-250 and F-350 Super Duty
Today on our 2004 Ford F250 Crew Cab we will be test fitting the CURT folding cargo carrier. That's part number C18153. Its dimensions are 24 by 60, it has a max capacity of 500 pounds, and it's for 2" hitches only. We've got a 2" hitch receiver here today. We can go ahead and start by inserting our shank into our receiver until our pinholes line up. Once we get that lined up we'll go ahead and take our pin and clip.
Curt 17x46 Hitch Cargo Carrier Review - 2004 Ford F-250 and F-350 Super Duty
Today, on our 2004 Ford F250 Crew Cab we will be test fitting the Curt Cargo Carrier, that's part number C18145. It's dimension are 17 by 46. It has a max capacity of 500 pounds and it can be used for 1 1/4 or 2-inch hitches. We've got a 2-inch hitch here today, so we're going to be using our adapter. We can go ahead and begin by inserting our shank into our receiver. Next, we'll line up our pin holes, then we'll take our included anti-rattle bolt and thread that through. Once we get that hand tight we'll go ahead and take our socket wrench and tighten that the rest of the way down.
Rola Dart Hitch Cargo Carrier Review - 2004 Ford F-250 and F-350 Super Duty
Today on our 2004 Ford F250 Crew Cab, we will be test fitting the Rola Dart folding cargo carrier. That's part number 59550. It's dimensions are 23 by 56. It has a max capacity of 450 pounds. It's for 2-inch receivers only. We've got a 2-inch hitch here today.
What our customers are saying:
"very good prices, rack came with very easy to follow instructions, very easy to assemble, fast shipping. Thanks"