Most Popular Tandem Axle for 2002 Ford Excursion

Added a third 7000 lb axle to our 14000 lb trailer. Easy to install, fit perfectly. Handles the weight better.

If I were to rate this product I would want to say it was better than excellent. Very impressed with your products. definitely beyond my expectation. If fact I ordered brakes for the trailer the very day I received slipper springs kit.

Product and service are excellent. You should consider using better shipping containers or using a different shipper. My box showed up with a hole in the bottom and the tape ripped almost gave way. By reading other comments this is not the first time.

Got these parts quickly and was able to rebuild my trailers entire suspension before hauling a car on a 1000 mile weekend road trip. Very glad I found E-trailer.

Just what I needed. Fast delivery and easy to install. Adam did a great job finding this part for a older trailer.

Quality and fit are good. The paint is thin so I painted them because they are going on a boat trailer.

This trailer sees some use off pavement. The added ground clearance provided by the kit is very helpful. The lifting blocks are well constructed and the hardware is high quality. Installation was straightforward, but great care must be taken when lifting the trailer off the ground to remove the axles and also to ensure that the new fasteners are tightened properly. Not a job for inexperienced mechanics.

This kit arrived packaged very well and exactly as described. Inventory of included parts complete. It will be a straight forward job to install and solve my problem of having the trailer too low at the rear since I can't lower my hitch any further. I recently replaced both 20 year old Dexter #10 Torflex axles with 10 deg down vs 0 deg down spindles. I am glad for the improved ride instead of basically a solid axle, but still needed this kit to solve the angle of the trailer because I'm as low as I can go with my weight distribution hitch at the ball.

Some of the pieces in this kit are of questionable quality. In particular, the threaded center of the nuts are not round, and will not thread on to the bolt. The kit comes with 14 of these nuts, and 7 of them are unusable. This is unforgivable, considering the issue has been reported at least since 2023, as there is a review and accompanying photo on 05/16/2023. So if you buy this kit assuming the problem has been corrected, you will be mistaken. Other than this issue, the kit seems to be acceptable.

I can always count on E trailer to get me what I want when I need it and Fast I can always depend on them to get the product to me in a couple of days which makes my turnaround faster. Thank you.

Excellent service and prices. Needed to replace curved equalizer, shackles and bolts, nylon spring bushings, u-bolts, and wheel bearing seals on my sailboat trailer. etrailer had everything and shipped it fast. Staff at etrailer was excellent!

These were just what we needed for repairs on our 1983 stock trailer. The old parts were quite worn. We gave the trailer a face lift as well, and it should last another 37 years.

Just installed the lippert center point and I have to say very impressed on how well it’s built. Super easy to install and I can’t wait to take it down these California roads and see how much better it rides. Installed on a 2022 jayco eagle Ht 29.5 BHDS

Shipped and received as ordered and describe. Only missing 1 lock nut for bolt that went on left side to frame. Installed myself and took about 3 hrs to complete installation and run air lines and gauge. Only thing there was no installation instructions for torquing nuts. Will see how it handles Wednesday 5/30/24 on getaway trip to see Micky and Minnie. My fifth wheel is 44 ft long Forrest Glen Wildwood Heritage Glen Elite 16,000 lbs. Note: Had to modify the piece that slides up into frame mine had a reinforced piece welded inside on frame had to notch each side to slide another 1/4 “ up for blot to go though hole.

These fit perfectly on my triple axle Kaufman trailer where I replaced all 4 of them. I got some commercial quality spray paint and painted them black. I'll also include some pictures of my old ones that were original with the trailer. You can see they definitely needed to be replaced! I always use etrailer for my trailer parts. Everything is good quality, fits perfectly, and arrives on time.

Trash !!!! 4 equalizers and just one it’s holding the weld now I’m losing money because my trailer suspension its not functioning

great deal

Very heavy duty and exactly what I needed.

By far the best upgrade to our 5th wheel RV. It pulls and rides like a dream now.

Ridiculous... I spent all that time and money. Cracking my head on the bottom of my fifth wheel while crawling around underneath it. I said ridiculous because when I took it for a test drive, it exceeded my expectations! Worth every penny and the headaches! It feels just as if I have a heavy load in the back of my pickup. There is no bucking and the only bumps I feel are what is under my truck tires. Couldn't even feel rumble strips in the road when coming up to a stop sign. I told my wife that I will not own a double axle trailer without a comfort ride system again!

Dexter kit looks and feels robust! Can’t wait to put it on and see the results. Did have one of the shackles that would not fit and Etrailer customer service was Awesome! Sent what I needed right away. Will be buying from Etrailer again!

Upgrade for my trailer with worn bushings and no lube points. The rubber on these equalizers along with the wet bolts and bushings eliminate the squeaks and creaks on my trailer.

The cabinet doors aren't flying open and everything rides much smoother!

Love the comfort ride system! Definitely greatly improves the ride. Pulling a 30ft. Camper with a half ton truck. Used to get a lot of the porpoising now it has almost eliminated it. Very noticable. Took longer than I thought it would for install....but got it done in a long weekend. Customer service was great.

I love this suspension its quiet and the handling and ride is the best I have ever used on a trailer. Gonna buy another set for my gooseneck trailer. Will never go back to leaf springs!

I used these to replace the leaf springs and equalizers on a 20’ gooseneck cattle trailer that I rebuilt. The ride is great and the usual rattling and clanging of the trailer going down the gravel road is gone. So far I am very happy with the ease of installation and the performance of the suspension. I guess only time will tell about the durability of the rubber components in the long run.

The holes to mount to top of axle fit fine. It's the holes the mount on the side, to the frame bracket are filled too low. They're off by half a diameter.

I purchased this item for 2015 micro mini with torsion axles.Simply put, the suspension lift for this trailer is no longer available.Three of the holes lined up perfectly.The 2 bottom holes and the one front one that bolts to the trailer. With an angle grinder, I cut the button rail of the lift kit with an angle gri der and had to drill the top hole of the bracket on the trailer to install the fourth screw and torque all bolts. It fits and operates perfectly and my minor mini went from 6 inches of ground clearance to 9 inches of clearance at the lowest part of the trailer. A beautiful retro fit for an item that is no longer available for purchase anywhere!!! If.your handy with an and grinder this modification is possible with this kit and well worth it!!! Sorry no photos as of yet.

Less bouncing, furniture doesn't move around when traveling on rough roads, better stability.

Great product! Excellent installation instructions (for the DIYer inclined to step up!). Excellent support... I ordered the wrong kit (my axle size was different) but customer service worked with me to correct it. I installed the shocks incorrectly but the service team quickly pointed out that I misread the instructions. I have a 12,000 pound, 38' trailer with a lift on the back for my 900 pound motorcycle. I've put around 7500 miles on it including a couple times across the Rockies and absolutely love the handling. Self installation is not for the feint of heart but it saved me around $10k labor not having a dealer install it.

Been great so far..fabbed removable axle system with the timbrens

Seems like a great product and service was excellent. UPS lost one of the three parts and was a week long in delivering it, and then said that it was because it was packaged poorly from etrailer. I used a 4x6 steel rectangular tube spacer to get my trailer back up to the original height. Seemed pretty straight forward, but it would be nice if the system could be designed so the user doesn't have to cut the mounting brackets off the axle and re-attach the Timbren brackets.

The Dexter Heavy-Duty Suspension Kit was an Exact Replacement, and a Perfect Fit for my RV Trailer. They were a much more substantial replacement for my factory parts. The bronze bushings, and wet bolts will definitely help my suspension last a long time due to being able to lubricate all of the bushings and pivot points, which will ensure worry free traveling.

I would have given a 5 if the zurk fittings were better quality, one grease (zerk) fitting was damaged and missing the ball, so I had to get one from the hardware store. Put better grease fittings in and there wouldn't be any complaints about not taking grease.

Great replacement for cheap lippert products

My wife and I installed the Dexter EZ Flex Suspension kit on Grand Desin Imagine RV Thursday, July 18th, 2024. It took us about 6 hours but some of that time was getting our RV trailer jacked up and secured with jack stands. After the installation we greased all the wet bolts and the fittings on the EZ Flex equalizer. One problem we have is there is one Wet bolt that will not take grease, after several attempts. All others accepted grease but this one. We’re wondering if this one wet bolt is bad.