Most Popular 20000 Lbs GTW for 1997 Dodge Ram Pickup

Build quality was great and it looks perfect. My only issue is they should supply hard washers and better quality lock washers. 2 of them bent so bad I had to remove them and file the heads to get the huge burrs off to tru to seat another one. If you supply high strength bolts you need to supply a higher grade lock washer it it just tears up the power coat .

Click to Enlarge

I haven’t pull the 5th wheeler yet, but the B&W Companion is a super heavy duty hitch and it looks like it will handle the job. The installation of the hitch went well. The instructions were pretty straight forward. No problems.

Click to Enlarge

This hitch is one fine piece of equipment. Instructions were perfectly detailed and if that's not enough there are videos to guide you. Installed in 4 hours with no problems. Haven't gone anywhere yet but did hook up to camper and was impressed. 2017 Ram 2500 Short Bed

Click to Enlarge

Click to Enlarge

Well built product. Great craftsmanship. Not cheap, but you know why when you see it. Safety is a must, not worth skipping out on a lower grade hitch

I coupled this Curt Q20 sliding hitch with the Curt "Adapter Rails for Curt 5th Wheel Hitch w/ Slider - Ram Towing Prep Package Item #C16022", it fits and works perfectly. etrailer's pricing was a welcome significant-amount less expensive than other online vendors' sites I researched for the exact same item. The entire assembly, hitch and adapter, is heavy as expected, around 200+lbs. I installed a light-duty (220lb single line/440lb double line) overhead electric hoist in the garage with a kingpin attachment for lifting this out when an empty bed is needed for hauling something other than the RV. The hitch works exceptionally well, provides the needed extra behind-cab clearance needed for the short-bed extended-cab Ram 2500 when set in "Maneuver Mode", tows over the rode exceptionally as if a regular hitch in "Towing Mode". Be sure to be on flat ground when attempting to change the slider's mode, it will not allow movement of the slider if more than a few degrees of incline is present, probably a great safety feature. I found that my Ram 2500 was easily able to handle the non-optimal loading in "Maneuver Mode" when being driven at low speed a short distance (few hundred feet) for final parking maneuvers, from a flat area to shift the hitch to camping and parking areas.

The curt Q20 5th wheel hitch with the r20 slider performed exactly as it should. It fit the Ram puck system pretty well. The only issues I had was because of the slider I had to have the pin box on camper raised as it was nose high while hooked to the truck even on the lowest setting.

Just received my anderson goosneck 5th wheel hitch and installed right away. Material is made of superior craftsmanship and will be looking forward to not lifting my heavy husky anymore. 5 star all the way

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Love this hitch! Bought the Andersen because I wanted to be able to remove hitch easily and be able use the truck bed. It takes only a few minutes to remove from bed no tools required. I installed the bed rail kit myself in my 2019 Ram 2500 short bed. The Andersen hitch allows my 32' fifth wheel 90 degrees turning radius.

Just installed my Q20 no problems at all dropped right in place I did not tighten bolts all the way until it was in place directions could have been a little more clear for the ram puck system etrailer one of the best online companies I have dealt with from customer service to getting right info to the best tracking ever Can’t say anything about the hitch yet get my RV Monday so far so good I feel confident

Click to Enlarge

This 5th wheel hitch fits OEM hitch mount provisions perfectly on my 2017 Ram 3500. Connecting and disconnecting works well. This hitch is heavy for one person to manage, but a hoist set-up makes for easy installation and removal. Tows well with no play between trailer pin and truck. Great product.

Click to Enlarge

The hitch itself is great. Mounting in the stock pucks on my Ram 3500 was very simple. The king pin latch is positive when closed and easy to operate. The only drawback is the slider latch. It came undone once and slid back while I was maneuvering. I solved this by using a heavy duty rubber bungee strap to hold it in the locked position. I would recommend this to anyone with a short box truck.

I am very pleased with this hitch, it fit into the prepped bed of my 2016, 2500 Ram perfectly. This is one heavy duty hitch, made very well. The people at B&W definitely know how to make a hitch. It is heavy (weight wise) but I use a overhead winch to lift in and out of my truck bed, works great. I wanted the best and with this hitch I got it.

Click to Enlarge

The hitch is great . The only problem was shipping. When the order arrived the outer box was extremely beat-up. Upon opening, the inner box was so damaged it was not reconizable...the styrofoam was in pieces and the hitch paint was scratched-up. It was treated VERY badly in shipment...I took pictures and was going to forward to you but my phone crashed and that's when I learned my cloud back-up did not include my photos. I needed the hitch immediately for a trip, so I just installed it and chalked-it up as bad luck. With all that said, I owned Reese before but the Curt just seems more substantial

Two boxes del by UPS in good shape for the weight, I installed this myself, while still boxed I lifted into my Ram 2500 to handle easier, installed into my pucks then assembled the rest, went very well, the label they want you to put on driver side you can’t even read, let alone while holding in hand, we will be heading to the mountains of Colorado soon, we’ve always had a bumper pull till now, I’m sure this will work very well, this is 20K double jaw, thank you

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Overall a great experience. I love the Curt 20A fifth-wheel hitch. Easy to hook and un-hook my Columbus 320RS. Very quiet ride too. One issue; the hitch arrived in 2 boxes and both were beat up pretty bad. That resulted in some paint damage to the unit which I touched up right away. I highly recommend the hitch and etrailer.com.

Very satisfied with this hitch. Smooth lockup and slides fairly easy. The only issue I had which is not a problem with the hitch itself is that it does sit a little higher than expected. This is in part due to that I am using the Ram factory prep kit, which requires an adapter. I am using Curt's adapter (C16022) which does add about 2-3 inches to the overall height of the hitch. The only other thing which has nothing to do with the functionality of the hitch, but may be something to consider, is how it mates up to the adapter. The rails for the slider stick out awkwardly, which you can see in some of the pictures. Your situation may be different, but overall, this combination works very well together. Not to mention, etrailer's customer service is great. Purchase with confidence.

Love the B&W hitches, this is my second one. First was the companion to the turnover ball. That one was a little smaller and lighter for installing and removing. This one is with the Ram puck system, a little bigger, heavier and more awkward installing and removing. Mostly leave in now until I fabricate some sort of system. With that being said size and weight is no fault of B&W as you had to work with the Ram puck system. Overall I am happy with the hitch any complaints I have are with Ram.

one great hitch!

Fast deliver. Easy to install with the puck system on Dodge Ram.

Love the B&W hitches, this is my second one. First was the companion to the turnover ball. That one was a little smaller and lighter for installing and removing. This one is with the Ram puck system, a little bigger, heavier and more awkward installing and removing. Mostly leave in now until I fabricate some sort of system. With that being said size and weight is no fault of B&W as you had to work with the Ram puck system. Overall I am happy with the hitch any complaints I have are with Ram.

Love it. I took it out of the box, walked it over to my truck, and set into the openings in my truck bed and turned the handles and put pins in and I didn't even have to adjust it it was perfectly tight. Put the two pieces on to hold the top piece and added a little Grease and it was ready to go. I have a 2017 Ram 3500 4 X4 long bed with airbags and mounted it forward and up all the way. I'm pulling an 18000 pound fifth wheel with flex-air king pin and it rides perfectly. PERFECTLY. I'M very happy with the quality of build and ease of use.

Click to Enlarge

Click to Enlarge

Haven’t picked up my trailer from the dealer yet but went ahead and go everything installed. Paired the BWRVK3300 with the Reese Underbed Goosneck with Rails #30158-52 for my 2012 Ram 2500 with Ramboxes. Perfect fit can’t wait to see how well it works with the 5th Airborne Sidewinder. Can’t thank etrailer enough for helping me find exactly what I needed when the RV dealers kept suggesting hitches that would not work with the sidewinder!

Love the B&W hitches, this is my second one. First was the companion to the turnover ball. That one was a little smaller and lighter for installing and removing. This one is with the Ram puck system, a little bigger, heavier and more awkward installing and removing. Mostly leave in now until I fabricate some sort of system. With that being said size and weight is no fault of B&W as you had to work with the Ram puck system. Overall I am happy with the hitch any complaints I have are with Ram.