# 1
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Solid, but requires allen wrench to adjust properly due to holes being a little loose in comparison to the pin size.
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
# 2
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
This is Very heavy,to take in and out as 1 piece . Also it long away from truck i had to install a jumper wires for the trailers plug ,this unit has A LOT of movement [up and down ] which i hate
# 3
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
I didn’t receive the ball mount. Only thing in the box was anti rattle device
I’m pleased with the product and how prompt the delivery was. However the packaging was insufficient and the packaging was torn open all over. Scuffing of the finish is a result and of little consequence due to the intended use. It’s a stinger w/ball for motorhome. May I suggest better packaging in the future
# 4
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
The Cushioned Ball Mount with an 8-3/4" Rise was needed to allow a 2004 Ford Van to tow my offroad capable Chalet Camp trailer. The Trailer sits level with the ball at ~20" off the road while this van's receiver sits at just over 11". The 10,000lb rating on this mount is way overkill for this 1500lb trailer but the cushioning should help avoid the "Klunk" sound every time we stop or takeoff. Thanks to Patrick and the Crew at etrailer for their help with this selection.
Excellent product, but I am writing this review about the service. Etrailer shipped these parts to a campground so I could install on my new RV. Service and shipping is excellent.
# 5
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
The hitch and the trailer ball with the hitch was perfect for making my trailer level behind my vehicle
Shipping was a mess, lost the first one in the mail somewhere because no one thought a 50# hitch would punch through cardboard. It is working as expected, but does not seem to be a true 2" drop.
# 6
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
I tried twice to get this hitch and ball from [online vendor]. Twice the shipment was lost and I had to get a refund. Shipment from etrailer is right the first time and arrived quickly. Plus, since the ball is already torqued on the ball mount, I don't need to by a large socket.
We’ve already installed it and hitched up the horse trailer. Works great for my needs. Half the weight of the much heavier weight distribution system we had been using (and will continue to use for Interstate travel). Hook up was fast and easy.
# 7
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
Good product and Good costumer service. Thanks
Bought to pull my boat with my Yukon and needed a drop hitch to level out the trailer. I wanted to buy a quality hitch, and let me tell you the B&W does not disappoint. Well engineered. It’s it heavy but when installed it is pretty easy to adjust height and ball size. Also supporting an American company is a plus!
# 8
Curt Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 9-3/8" Long - 10,000 lbs
Works well. With a 10K hydraulic lift trailer that only has a foot of clearance in the up position this did a good job of leveling the trailer, I rarely bottom out now, where as before transitions to inclines were often a problem Now the Van pulling it handles better.
Long length allowed me to add a hitch mounted mud guard kit. Have always trusted Curt products.
# 9
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
Sturdy and feels strong / heavy. Love it, except for the part when I forget it is behind the van and run into it :)) Not pleasant. Easy to install and the drop is just right for my trailer. Before I used to have to raise the tongue all the way to the top of the jack, now it feels like it is just there. The trailer seems to be well balanced now.
The ball mount connects my 4x4 Ford Van to my Keystone Zeppelin 271 travel trailer. I needed a mount with a 3" drop and 10,000 lbs capacity, which this unit supports. It works as expected and needed.
# 10
Pro Series Tri-Ball Mount for 2" Hitches - 1-7/8", 2", 2-5/16" Balls - Black
EVERTHING WAS EXCELLENT FROM PLACING THE ORDER TO RECEIVING THE PACKAGE AS WELL AS THE FOLLOW UP. WOULD STRONGLY RECOMMEND ETRAILER....
Not only did I get the parts I needed at a great price. They were delivered they day after I ordered them. Great communication from my salesman. I will definitely be a return customer.
# 11
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
The Cushioned Ball Mount with an 8-3/4" Rise was needed to allow a 2004 Ford Van to tow my offroad capable Chalet Camp trailer. The Trailer sits level with the ball at ~20" off the road while this van's receiver sits at just over 11". The 10,000lb rating on this mount is way overkill for this 1500lb trailer but the cushioning should help avoid the "Klunk" sound every time we stop or takeoff. Thanks to Patrick and the Crew at etrailer for their help with this selection.
Excellent product, but I am writing this review about the service. Etrailer shipped these parts to a campground so I could install on my new RV. Service and shipping is excellent.
# 12
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
Its been a year and I aint broke it yet. I use this hitch to tow my 7Klb trailer. The trailer is tongue heavy and I needed something rugged to tow it with. Haven't had any troubles with this hitch.
This item is really stout, and will give peace of mind when towing my 10,000 pound boat and trailer.
What our customers are saying:
"Very broad selection and outstanding service."