
Weather Guard PowerSync fuse box wiring harness provides power for your Weather Guard remote keyless entry system and tool box light bar. Connects to battery fuse box on all pick up trucks. No drilling required.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today, we're gonna take a look at this Weather Guard Fuse Box Wiring Harness for truck toolbox PowerSync accessories. This Weather Guard PowerSync Fuse Box Wiring Harness provides power for your Weather Guard remote keyless entry system or your toolbox light bar. If you are needing to power both the remote keyless entry system and the light bar, you will also need to pick up the Weather Guard 4-way outlet splitter for the PowerSync accessories, and you can find that on our website using item number WG73BV. This wiring harness connects to your battery fuse box on all pickup trucks, and what's nice about this is no drilling is required. This is gonna connect quickly and easily, no cutting or splicing of wires, and you just simply disconnect the negative terminal from your truck's battery and identify an open fuse slot in the under-the-hood fuse box, which provides constant power. You wanna review your vehicle owner's manual to locate the horn fuse or any other continuously powered accessory and utilize the open slot in the same row as that fuse.
Now, if you're utilizing a slot currently in use, as in the case of the horn slot, you will want to remove the existing fuse and select the fuse with a 10 amp or less in rating and insert it into the lower fuse slot on the fuse end of the harness. Plug in one of the three fuse ends provided in the harness that you see here, and it's very easy to remove from the harness itself, and you just use one of those ends that will fit into the fuse slot. Now, if you are utilizing the slot currently not in use, plug in one of the three fuse ends provided with this harness that fits into the fuse slot. It is important to note if the fuse slot is not programmed to provide constant power, no power will reach the truck box. Attach the white ground wire that you see here from the harness to an existing ground near the fuse box, and then you would route the harness inside the truck body between the fuse box and the knock out hole in the bulkhead of the truck bed.
It is recommended to follow the path on the existing vehicle wiring harness along the frame of the truck, and again, it's recommended to go along the driver's side, and then secure the new harness to the truck in a few locations using the zip ties that are included. Finally, remove the knock out plug from the bulkhead of the truck bed and feed the harness end into the truck bed and then through the grommet in the side of the truck box, and then reconnect your battery. This is constructed with OEM grade connectors and weather sealed for years of dependability. Well, that's gonna conclude our look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.