Heavy-Duty Crossbar Fit Kit for Rhino-Rack Steel Mesh Baskets and Steel Mesh Trays

See what our Experts say about this Rhino Rack Accessories and Parts

• Dimensions of the Heavy-Duty Crossbar Fit Kit U-Bolts # RUBK
  I spoke to my contact at Rhino Rack to get the dimensions of the U-bolts of the Heavy Duty Crossbar Fit Kit # RUBK and found that it measures 2-3/4 inches from the top of the threaded portion of the U-bolt to the bottom of the u-bolt and measures 2-1/4 inches across measured from the inside. Check out the picture I attached to see these measurements.
  view full answer...
  
• Will U-Bolts of the Heavy-Duty Crossbar Fit Kit # RUBK Rust Easily
  The U-bolts of the Heavy-Duty Crossbar Fit Kit # RUBK that you referenced are zinc coated which means they will do an excellent job resisting corrosion. It would take years of weather exposure for them to start to rust most likely.
  view full answer...
• What are the Dimensions of the U-Bolt in Rhino-Rack Heavy-Duty Crossbar Fit Kit # RUBK-MF
  I went in the warehouse and measured the U-bolt from Rhino-Rack Heavy-Duty Crossbar Fit Kit , part # RUBK-MF. The width from center to center of the U-bolt is 2-5/8 inches. The height of the U-bolt is 3-5/32 inches. The amount of thread on each bolt is 2-3/32 inches. The U-bolt diameter is 6 mm or 15/64 inch. I am including a picture of the U-bolt with the dimensions listed.
  view full answer...
  
• Width of the U-Bolts of the Rhino-Rack Heavy-Duty Crossbar Fit Kit part # RUBK-MF
  I went in the warehouse and measured the U-bolt from Rhino-Rack Heavy-Duty Crossbar Fit Kit , part # RUBK-MF. The width from center to center of the U-bolt is 2-5/8 inches. The height of the U-bolt is 3-5/32 inches. The amount of thread on each bolt is 2-3/32 inches. The U-bolt diameter is 6 mm or 15/64 inch. I am including a picture of the U-bolt with the dimensions listed.
  view full answer...
  
• How Wide Are The U-Bolts Included with the Rhino Rack Heavy-Duty Crossbar Fit Kit RUBK-MF
  The u-bolts that come with the Heavy-Duty Crossbar Fit Kit for Rhino-Rack Master-Fit Rooftop Cargo Box part # RUBK-MF are 2-5/8" wide which you can see in the attached photo. This measurement is taken from the center of each bolt and the bolts are 15/64" diameter so if you need the width outside to outside then that would be 2-55/64" or 2-25/64" for the inside to inside width.
  view full answer...
  
• Dimension Pictures of U-Bolt From Kit RUBK-MF
  The U-bolt size of the part # RUBK-MF is what you mentioned seeing in the attached picture. The knobs are larger so it might make them look smaller when looking at the product pictures. Larger u-bolts are not available and if they were they wouldn't fit the cargo box this was intended for.
  view full answer...
  
• Which Crossbar Fit Kit Fits Rhino Rack Steel Mesh Baskets to Rhino Rack HD Crossbars
  Rhino Rack actually has a fit kit for the steel mesh baskets that was designed to fit the Rhino Rack HD crossbars with the part # RUBK. The # MUBK would not be big enough to fit the HD bars.
  view full answer...
• J-Hook for Attaching Cargo Box to Cargo Carrier
  The knobs of the Heavy-Duty Crossbar Fit Kit # RUBK-MF would only thread about half way down the threaded portion of the u-bolt. A better choice might be the part # UWSJBOLT which is normally used to attach truck bed tool boxes to the bed by the bed rails.
  view full answer...
• Is Mounting Hardware Available To Fit Yakima Space Case Roof Box On Chevrolet Traverse Crossbars
  We do not offer a mounting kit that will work with the Spacecase 20 roof box you have. I spoke with my contact at Yakima and they no longer offer a replacement mounting kit for that series of roof boxes. If you wish to replace the roof box with a newer model I recommend the Yakima SkyBox 18 Rooftop Cargo Box, part # Y07336. I have confirmed this box will work with the crossbars you said you have on your Traverse roof rack. I have attached a link to a product review video you can check out.
  view full answer...
• How to Attach a Rhino-Rack Steel Mesh Basket or Tray to a 2018 Toyota 4Runner TRD
  What type of crossbars do you have on your 2018 Toyota 4Runner TRD? If they are the Rhino-Rack Heavy-Duty Crossbars then yes, the Heavy-Duty Crossbar Fit Kit for Rhino-Rack Steel Mesh Baskets and Steel Mesh Trays part # RUBK is correct for you. However, if you have aero crossbars then you will want to use the Aero Crossbar Fit Kit for Rhino-Rack Steel Mesh Baskets and Steel Mesh Trays part # S280 or if you have square/round crossbars you will want to use the Round/Square Crossbar Fit Kit...
  view full answer...
• Rooftop Cargo Box For Rhino-Rack Heavy-Duty Crossbars
  There is not a mounting option for the Thule Motion XT on Rhino-Rack Heavy-Duty crossbars. The cargo box option for those crossbars is the Rhino-Rack Zenith MasterFit Rooftop Cargo Box # RRRMFZ66 and Heavy-Duty Crossbar Fit Kit for Rhino-Rack Master-Fit Rooftop Cargo Box # RUBK-MF.
  view full answer...
• Does the Rhino-Rack Steel Mesh Roof Mounted Cargo Tray Include Universal U-bolt Hardware
  Yes, the Rhino-Rack Steel Mesh, Roof Mounted Cargo Tray, # RPBS-S280, comes with the universal U-bolt hardware kit that allows this tray to mount to most roof-rack systems. If you have a Rhino-Rack roof rack on your vehicle with the heavy-duty crossbars, then you will want to pick up the Heavy-duty Crossbar Fit Kit, # RUBK, to secure this tray on the larger crossbars. You may also be interested in the Rhino-Rack Tie-Down Straps, # RTD3, to secure any cargo you plan on carrying on this...
  view full answer...
• Compatibility of Round Cargo Box U-Bolts with Square Roof Rack Crossbars
  Its easy to modify a cargo box to fit a new vehicle that has differently-shaped roof rack crossbars. However you may not need to do anything to get your Karrite Explorer cargo box's hardware to work on your vehicle with square cross bars. It is perfectly okay to use rounded u-bolt hardware like # 1755892 on a square bar. The replacement hardware kit # SR05587 that we offer for your Explorer cargo box actually uses rounded u-bolts. As long as you can tighten down the hardware you have...
  view full answer...
• Replacement Mounting Kit For Thule Sidekick Roof Mounted Cargo Carrier
  We do have the Replacement Mounting Kit # TH04958 for your Thule Sidekick Roof Mounted Cargo Carrier # TH78GC. The Rhino Rack Heavy-Duty Crossbar Fit Kit # RUBK-MF brackets are only designed for the Rhino-Rack Master-Fit cargo boxes RMF400, RMF440, RMFB440, RMF550, RFMZ65 and RMFZ85.
  view full answer...
• Can Accessory Carriers Mount to Rhino Rack Steel Roof Cargo Tray RRRPBS
  The Rhino Rack Steel Roof Cargo Tray RRRPBS does not have specific accessory mounts for the items you mentioned like light bars and shovel mounts but if you had such accessories that can mount on the tray's 1-inch round tubing and available space its steel construction will handle them. This tray requires a mounting kit and there are several to choose from depending on the type of roof rack bar you're using. For aero, elliptical, and most factory crossbars use kit # S280. For Rhino-Rack...
  view full answer...
• Longer Replacement Ubolt for Sears Luggage Carrier Sport 20 SV
  The U-bolt you are asking about, the Replacement Part for the Thule Sidekick # TH02943 is 4" wide and 2" deep with a threaded portion of about 1-1/2". If you find it too short for your crossbars, you do have different options: First, you can find a 4" wide U-bolt that is deeper than 2". RhinoRack Aero Crossbar Fit Kit # S280 is 4" wide and has 2-1/2-inches depth measured at the center indent. However, the threaded portion of the ends measures 1-1/8-inches which is shorter that the Thule...
  view full answer...
  
• Does the Rhino-Rack Roof Rack # RLZ01-DC Install Completely Level on My 2010 Ford Transit Connect?
  Great question! I went ahead and called my tech at Rhino-Rack, and she confirmed that the reason why there are two different heights of legs that come with the Rhino-Rack Roof Rack # RLZ01-DC is because of the curvature of the roof. She also said that the crossbars will be even once installed, so the cargo box will lay completely flat. I went ahead and attached a picture of this rack installed to give you perspective. For a great cargo box that is compatible with the larger Heavy-Duty...
  view full answer...
  
• Will Yakima SkyBox 21 Fit on Rhino-Rack Heavy-Duty Roof Rack Crossbars
  The max dimensions for a crossbar that the Yakima SkyBox 21 # Y07337 can accommodate is 3-1/2" x 1-11/16". The Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250B-2 are a little too tall for that so if you want to stick with Rhino-Rack you need the Vortex crossbars like part # RRVA137B-2. If you let me know the year/make/model of your vehicle I can make a roof rack recommendation for you. The Rhino-Rack HD bars are much taller than typical crossbars so none of the Yakima boxes will work,...
  view full answer...
• Rhino Rack Heavy Duty Crossbar Mounting Kits for Rhino Rack Cargo Boxes and Bike Racks
  Yes, you are correct you will need the Heavy-Duty Crossbar Fit Kit for Rhino-Rack item # RUBK-MF to attach the item # RRRMFT440 to the Rhino Rack HD crossbars. To attach the Rhino-Rack Hybrid Roof Bike Rack item # RRRBC050 to HD crossbars you will want the Heavy-Duty Crossbar Mounting Kit item # RRRBCA035. Rhino Rack does not offer options to change the lock cores before the parts ship out but what you can do is use the Rhino Rack Masterkey item # RRRK106-4 to replace all four cores...
  view full answer...
  

Do you have a question about this Accessories and Part?