Reese Universal Mounting Brackets for 5th Wheel Trailer Hitches - 10 Bolt

Ask the Experts about this Reese Accessories and Parts

• Dimensions of Reese Universal Mounting Brackets # RP58314
  The # RP58314 universal brackets are 2.5 inches wide and 4 inches long on top. The length for the long brackets are 7.5 inches and 5.6 inches for the short brackets. Both brackets are .391 inches thick. I have linked the detailed hole to hole dimensions to this page for you to better see. All measurements were taken with a digital caliper like # PTW80157.
  view full answer...
• Recommended 5th Wheel Rail Brackets For 2006 Ford F-250
  The Reese Universal Mounting Brackets for 5th Wheel Trailer Hitches - 10 Bolt # RP58314 can be welded to your frame, but most people bolt them on. I recommend using the Reese Universal Installation Kit for 5th Wheel Trailer Hitches (No Base Rails) - 10 Bolt # RP30439 to give you all the hardware you need. If you want a custom bracket system for easier installation, you can use the Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches # RP50082 along with the Replacement...
  view full answer...
• Dimensions of Brackets in 5th Wheel Install Bracket Kit RP58314
  I went to our warehouse and measured the dimensions of both brackets included in Reese 5th Wheel Universal Mounting Bracket Kit # RP58314. Those dimensions are shown on the linked photo I prepared for you.
  view full answer...
• Universal 5th Wheel Frame Brackets for a 1999 Ford F-250
  I do have a set of "L-brackets" that will fit your 1999 Ford F-250 with part # RP58314 but unless your Pull-Rite SuperGlide 5th wheel trailer hitch uses industry standard rails (ISR) then I cannot confirm they will work for you. If your Pull-Rite SuperGlide does not use ISR then your only option would be to contact the manufacturer for a specific set of frame brackets that will work with both your hitch and vehicle.
  view full answer...
• Size of Holes and Dimensions of Reese Universal Mounting Brackets # RP58314
  I went out to the warehouse and measured the Reese Universal Mounting Brackets, part # RP58314. The size of the round holes on the brackets is 9/16-inch and is made to accept a 1/2-inch size bolt. The size of the elongated holes on the top of the brackets measure 1 inch long by 9/16-inch wide. Again, made for 1/2 inch bolts. The short brackets will measure 5-5/8 inches long by 2-1/2 inches wide. The long bracket measures 6-7/8 inches long by 2-1/2 inches wide. I am including a picture...
  view full answer...
• Frame Brackets for Moving Reese Fifth Wheel Hitch from 2008 Ford F450 to 2012 F350 Short Bed
  To install a fifth wheel hitch in your 2012 F350, you can choose a custom or a universal install kit. The universal install kit takes about 6 hours to install, and would require drilling into the truck frame. Since you already have the bed rails, you'd need the frame brackets less the bed rails, part # RP30439. The custom install kit would take half the install time, and would not require any drilling into the frame. Since your truck is a short bed model, you'll need to be concerned...
  view full answer...
• Do Husky Fifth Wheel Hitches Fit 2015 Ram 2500
  The brackets part # RP58314 fit rails part # RP58058 which do fit Husky fifth wheel hitches. For a universal rail kit that includes the rails and the brackets we have the part # RP30035-522 which is a fit for your 2015 Ram 2500.
  view full answer...
• Universal Fifth Wheel Hitch Mounting Brackets for 1999 Dodge Ram 3500 Dually
  The Universal Mounting Brackets, part # RP58314 are compatible with your 1999 Dodge Ram. This being said, if you order that part, the brackets are the only parts included. If you need the entire Universal Mounting Kit, which includes the bed mounted rails, brackets and hardware, you will need part # RP30439. The kit is also offered minus the bed rails as part # 58164.
  view full answer...
• Fifth Wheel Rails and Hitch Recommendation for a 2000 Ford F250 to Replace Bed Mounted Rails
  That is a very strange sound fifth wheel setup you have in the bed of your 2000 Ford F-250. Are there any brand names or part numbers you can get off of the hitch or rail system? We would love to see any pictures of this setup if you have them as well. For a rail kit that will install on the frame of your truck and has been tested to be safe I would recommend the part # RP50082-58. This is a custom install kit that will minimize drilling and install in about half the time of a universal...
  view full answer...
• Custom Fifth Wheel Rail Kit for 2006 Ford F-250 that Won't Require Frame Drilling
  Your best solution is going to be an all new custom rail kit for your 2006 Ford F-250 like the part # RP50082-58 for a couple of reasons. One reason is you can't mix bracket and rail kit manufacturers and since we don't know what brand rails you have I can't possibly guarantee you that any of the bracket kits would work well with it. Other reason is that the custom install kits install without frame drilling so you wouldn't have to drill additional holes. I attached an install video...
  view full answer...
• What Parts Are Needed To Install A 16K Reese Fifth Wheel To A 1996 Ford F350 With 8 Foot Bed
  You want to check your rails, to see if you have the 4-bolt rails or the 10-bolt rails. For your 1996 Ford F350 8 foot bed the 10-bolt rails are part # RP58058. The rails look similar but they have the mounting holes in different locations. If you have the 10-bolt base rails Reese Universal Base Rails 10-Bolt, # RP58058, you need the Reese Universal Installation Kit (No Base Rails) 10-Bolt, # RP30439. This kit is the mounting brackets with the hardware, but not the base rails. If...
  view full answer...
• 5th Wheel Rail Bracket Recommendations for a 1995 GMC K2500
  Yes, the Reese Universal Mounting Brackets # RP58314 that you referenced will work on your 1995 GMC K2500. These are just the brackets, if you need the installation hardware plus the rails you would want part # RP30035. If you need just the brackets and hardware minus the rails you would want part # RP30439.
  view full answer...
• Will Reese Universal Mounting Brackets # RP58314 Fit on 2004 GMC 2500HD
  Yes, the Reese Universal Mounting Brackets, part # RP58314, you have referenced will work on your 2004 GMC 2500HD. These are just the mounting brackets. They are designed to be used with the Reese Universal Base Rails, part # RP58058. If you need just the brackets (# RP58314) and mounting hardware minus the base rails you would want part # RP30439. If you need the installation hardware plus the base rails you would want Reese Universal Base Rails and Installation Kit, part # RP30035. If...
  view full answer...
• 5th Wheel Hitch Brackets to Install Base Rails in 2017 Chevrolet Silverado
  The # RP58023 brackets are for Rams so they are not what you need. The # RP58314 brackets are a universal fit so they will work on your 2017 Chevrolet Silverado 1500 but you will need to drill into the truck's frame. I also recommend replacing the hardware, the brackets and hardware together is # RP30439. If you would like the custom brackets for truck it's part # RP50064. This will reduce the drilling and be a much faster install.
  view full answer...
• Availability of L-Brackets for Fifth Wheel Rails
  We have Reese L-brackets part # RP58314 which most likely could work for your RBW rails but we really can't recommend you mix brackets and rail manufacturers. Instead you'd want the Reese universal rail kit part # RP30035.
  view full answer...
• Universal 5th Wheel L-Brackets for a 2015 Chevy Silverado 1500 and Reese Rails
  Your 2015 Chevy Silverado 1500 is indeed compatible with the universal L-brackets. You will need kit # RP30439. This kit includes 4 L-brackets and the hardware required to install them. The old hardware you already have cannot be reused because it is meant to be torqued down one time only. I have included a link to installation instructions for the universal kit.
  view full answer...
• Bracket Kit for Installing Reese Rails in a 1999 Dodge Ram 2500
  If you have a set of Reese rails already all you would need is the L-brackets part # RP58314 and then the replacement hardware kit part # 58164. These two parts are basically just the part # RP30035 which has been confirmed as a fit for your 1999 Dodge Ram 2500.
  view full answer...
• Parts Needed for 5th Wheel Trailer Hitch Installation on a 2002 Ford F-250 Super Duty
  There are two options for installing fifth-wheel hitch rails in the bed of your 2002 Ford F-250 Super Duty. The easiest option is to use the Fifth Wheel Trailer Hitch Custom Installation Kit with Brackets and Rails, item # RP50082-58. These custom brackets install in half the time that it takes to install a universal kit and eliminates the need to drill into the truck frame. The second option is the Universal Fifth Wheel Trailer Hitch Installation Kit with Rails, item # RP30035, which...
  view full answer...
• 5th Wheel Rails and Install Kit for 2007 Dodge Ram 1500 and RBW Lil' Rocker Hitch
  It is our understanding that the RBW Lil' Rocker 5th wheel hitch will fit in industry standard rails (see picture with mounting tab spacing). For industry standard rails that fit your 2007 Dodge Ram 1500 you can use # RP50040-58 (excludes short bed models with Mega Cab). Or, if you do have a short bed model with the Mega Cab use # RP50140-58. I have linked videos showing example installations for each kit.
  view full answer...
• Dimensions of Universal Reese Brackets For 5th Wheel Trailer Hitches
  The Reese Mounting Brackets part # RP58314 are considered Universal so they do fit most applications. I have attached the dimensions for the brackets. The whole universal kit that includes the hardware and rails is part # RP30035. The hardware for the brackets by itself is part # 116624. There may be custom brackets available that do not require drilling during installation if you would like to provide your year, make and model information to me I can check into that for you.
  view full answer...
• 5th Wheel Frame Brackets Needed for Transfering 5th Wheel Rails to a New 2009 Ford F-350
  Yes, we have just the mounting brackets for the Reese Universal Installation Kit. The Reese Universal Mounting Brackets for 5th Wheel Trailer Hitches - 10 Bolt, item # RP58314, comes with just the 4 brackets needed for fifth-wheel rail installation. If you would like to replace all of the hardware you can use item # RP30439, which includes all of the mounting hardware and brackets. If your fifth wheel was installed with the Reese Universal Base Rails, the Reese Universal Installation...
  view full answer...
• Fifth Wheel Rail Kit Recommendation for a 1994 Ford F-150
  The correct rail kit for a fifth wheel hitch in your 1994 Ford F-150 would be the part # RP30035. For just the brackets without the rails you would want the part # RP58314. This would not include any hardware though. The bolts that hold the rails to the brackets are considered one time use so you would also want the part # RP58430.
  view full answer...
• Fifth Wheel Rail Kit That Fits 2002 Dodge Ram 3500 Long Bed
  The only fifth wheel rail kits we offer for your 2002 Dodge Ram 3500 long bed are universal style kits like the Reese part # RP30035. For just the L-brackets you'd want the part # RP58314. The Curt kit you mentioned does not fit your truck.
  view full answer...
• Can an RBW 5th Wheel Trailer Hitch be Used with Reese Rails in a 2005 Chevy Silverado 3500
  You will need to install a compatible 5th wheel installation kit in the 2005 Chevy Silverado 3500 that fits both the truck and the RBW hitch. In order to determine if Reese rails in installation kit # RP50064-58, are compatible, you will need to compare the hitch to the measurements provided below. The Reese rails have mounting slots that are 9.990 inches apart on center, 20.624 inches apart on center, or 29 inches apart on center, side to side. The mounting holes on the rails should...
  view full answer...
• Availability of L-Brackets for Fifth Wheel Rail Kit
  For just an L-bracket kit for a fifth wheel rail kit we have the part # RP30439 which comes with all of the needed L-brackets and bolts/nuts. For just the L-brackets you would need the part # RP58314.
  view full answer...
• Brackets to Install Reese Rails in Bed of 1985 Ford F-250
  The brackets you need to install your Reese fifth wheel rails are the universal L-brackets part # RP58314 which are confirmed to fit your 1985 Ford F-250 and the Reese rails you have. You'll also need the hardware kit part # RP58504 as well as # RP58430 and you'd be set! Your air bags would not need to be removed either.
  view full answer...
• 5th Wheel Rail and Bracket Install Kit and Hitch for a 1993 Ford F-250 Towing a 25 ft Trailer
  The correct fifth-wheel installation kit for your 1993 Ford F-250 is the Reese Universal Base Rails and Installation Kit, item # RP30035. This kit works with all Reese fifth-wheel hitches and would work great with the Reese 5th Wheel Trailer Hitch - 16,000 lbs, item # RP30047. Make sure that the hitch you purchase is rated high enough for the gross weight of your trailer loaded and ready to tow. To determine if all of the hardware is present with the install kit that you have found you...
  view full answer...

Do you have a question about this Accessories and Part?