Video Transcript for Review of Pullrite Gooseneck Coupler Adapter Super 5th SuperGlide 5th Wheel Hitch - PUL78VR

Hi, everybody. Andy here with etrailer.com. Let's take a brief look at this Gooseneck Coupler Adapter for your Pull Ride Super Fifth and Super Glide Fifth Wheel hitches. This adapter is going to let you use your Pull Ride Super Fifth or Super Glide Fifth Wheel Trailer Hitch to tow your Gooseneck Trailer giving you the kingpin that you need for hookup. And let me just give you the measurement of our tube here. So as I hope you can see there, the tube width is four inches, and this does have a gross towing weight of 30,000 pounds and a maximum pin weight of 7,500 pounds.

And this is going to be a relatively easy install. You're just going to swap with your existing Gooseneck Coupler inner tube, and the cross pin is included, and this is going to use your existing set screws. Now this does include a removable lockout wedge, and I have this installed already. Let me see if I can tilt this just so you can see it. So right here, you see that removable lockout wedge, and that's going to be used with your Pull Ride Super Glide Hitches.

And then you can unbolt, and remove the wedge to use this with a standard fifth wheel hitch. So that wedge is included, and you can see where it bolts through right here. And this is tested to SAEJ 2638 standards. And this is made here in the USA, and the black powder coated steel is of course going to be corrosion resistant. So this is gonna hold up really well for you.

Instructions are also included to guide you through the very simple installation. Well, I think that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.

.