Replacement Weld-On, Snap-Ring Swivel Plate for Bulldog Jacks - 3/8" Plunger Pin Diameter
(4 reviews)
Price: $11.86
In Stock
Replacement Weld-On, Snap-Ring Swivel Plate for Bulldog Jacks - 3/8" Plunger Pin Diameter
Item # BDP2052000
Retail:$21.60
Our Price: $11.86
You Save: 45%
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (4)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Bulldog Accessories and Parts - BDP2052000
- Camper Jacks
- Trailer Jack
- Mounting Brackets
- Swivel Plate
- Bulldog
Welds onto your trailer frame to provide a mounting point for your Bulldog snap-ring swivel jack. Works for Bulldog snap-ring swivel jacks with 3/8" diameter plunger pins.
Features:
- Welds onto your trailer frame to provide a mounting point for your Bulldog snap-ring swivel jack
- Works for Bulldog snap-ring swivel jacks
- Fits 3/8" diameter plunger pins
Fits:
- All Bulldog snap-ring swivel jacks with 3/8" diameter plunger pins
P20520-00 Replacement Weld-On, Snap-Ring Swivel Plate for Bulldog Jacks - 3/8" Plunger Pin Diameter
Replaces P20510-00
California residents: click here
Video of Replacement Weld-On, Snap-Ring Swivel Plate for Bulldog Jacks - 3/8" Plunger Pin Diameter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Bulldog Trailer Jack BDP2052000 Review
Today we're going to be taking a look at the replacement weld on flat snap ring swivel plate for Bulldog jacks. This bracket plate welds on to your trailer frame from mounting your snap rings for the jack. It's going to provide the attachment point for the jack. Again it welds onto the side of the trailer tongue. It's a nice steel construction, very strong and durable. It's going to accept 3/8 inch diameter pin.
It has the groove right here for the swivel snap ring, now that is sold separately. You can find them at etrailer.com. The small holes on the unit have a diameter of .40 inches. Again that's going to accept a 3/8 inch diameter pin. The large hole that's going to have a diameter of 2.130 inches, which is very, very close to 2 and 1/8 of an inch.
The overall measurements of the plate, edge to edge this direction that's going to give us a measurement of about 4 and 15/16 of an inch, very close to 5 inches. Going this direction it's going to give us a measurement edge to edge of right on 4 inches. That's going to do it for today's look at the replacement weld on flat snap ring swivel plate.
Customer Reviews
Replacement Weld-On, Snap-Ring Swivel Plate for Bulldog Jacks - 3/8" Plunger Pin Diameter - BDP2052000
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Welds onto your trailer frame to provide a mounting point for your Bulldog snap-ring swivel jack. Works for Bulldog snap-ring swivel jacks with 3/8" diameter plunger pins.by: Marty K.03/25/2017
I needed parts to mount an old jack stand I had salvaged. I found all the parts I needed at etrailer.com. They have good service and parts at a good price.
by: Andrea 07/10/2022
Exactly what we needed. Fit perfectly!
by: Bruce P05/10/2012
I needed a swivel plate for a trailer jackthat was missing it. I called Fulton the manufacturer and they directed me to etrailer.com. They were courteous and sent5 the part out right away.
Thank You for your service to me.
by: Steven02/07/2018
Everything with the order was as expected. Thanks etrailer!!
Comments
No Problems, works great.
Steven W - 02/07/2019We have made a few order with yall and it has been really helpful for us. Thanks for being a great vendor.
Steven - 02/07/20194
4
See what our Experts say about this Bulldog Accessories and Parts
- Dimensions of Holes on Bulldog Weld-On Snap-Ring Swivel Plate # BDP2052000I went out to the warehouse and measured the Bulldog Weld-On Snap-Ring Swivel Plate, part # BDP2052000. The diameter of the small outer holes is .40 inches and the diameter on the large center hole is 2.130 inches. I am including a picture with the measurements listed.
view full answer...
- Will Replacement Swivel Ring Plate For Bulldog Jacks Fit BAL 29005 JackI went to our warehouse and measured the Replacement Weld-On, Flat, Snap-Ring Swivel Plate for Bulldog Jacks, part # BDP2052000. I have attached a photo of the plate with the dimensions noted. If these dimensions match the jack you have then it should work just fine. This plate welds to the side of a trailer tongue for installation and is designed for Bulldog snap-ring swivel jacks.
view full answer...
- What is Function of Replacement Swivel Snap Ring for Bulldog Jacks # BD500241The Replacement Swivel Snap Ring for Bulldog Jacks, part # BD500241, is used to hold the Bulldog series 150, 160 and 170 snap-ring swivel jacks to the mounting bracket on the trailer. The snap ring will insert into a groove on a mounting bracket, like the Replacement Weld-On, Flat, Snap-Ring Swivel Plate for Bulldog Jacks, part # BDP2052000, and keep the swivel jack attached to the bracket but still allow you to swivel the jack into the up or down position. If the snap ring is removed...
view full answer... - Does the Replacement Swivel Plate for a Bulldog Trailer Jack Come with Snap RingsThe replacement swivel plate # BDP2052000 does not include the snap rings. For a replacement snap ring use # BD500241. It is for Bulldog 150, 160, and 170 series jacks with up to a 5,000 pound capacity.
view full answer... - Can Fulton Bolt-On Sidewind Snap-Ring Trailer Jack # FTJ12000101 be Installed with Weld-On PlateYour Fulton Round-Tube Snap-Ring Swivel Marine Jack # FTJ12000101 that comes with a bolt-on bracket can be installed using a weld-on mounting plate like the one supplied with Fulton # FTJ120W0301. The part you can use is # BDP2052000.
view full answer... - Rcommended Jack Replacement for my Original Dutton Lainson 2,000 lb. Snap Ring Swivel JackThe Pull Pin, Easy Swivel Trailer Jack with Foot part # DL22689 does not come with any hardware. It has been designed to be welded directly to the Frame of the trailer. What you're looking for is a snap ring jack like the Bulldog Round Snap-Ring Swivel Jack part # BD151464. This gives you great capacity and lift at 15". This is held on to your current bracket like part # BDP2052000 by using the Replacement Swivel Snap Ring for Bulldog Jacks part # BD500241
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.