To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Waterproof LED tailgate light bar provides auxiliary brake, tail, turn, and reverse signals. COB technology creates a solid bright amber or white panel of light. Installs in the gap on your tailgate. Quick-connect harness with OE connectors.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff JD trailer.com. Today we're gonna take a look at the Putco 60 inch long direct fit blade LED tailgate light bar. Now this is a custom fit part. It is designed to fit the 2019 and newer Chevrolet Silverado and GMC Sierra 1500, 2500 and 3500 trucks. Now on a custom fit part like this, I do recommend for you to go to our website, use the fit guide, put in your year and model vehicle and it'll show if this will work for your application. Now, this is a tailgate light bar which will provide nice auxiliary tail stop, turn and backup light functions.
Basically this light bar will install in the gap at the bottom of your tailgate between the tailgate and the bumper. The LED's on this light bar will produce a nice bright red amber or white light based on which signal is being used. Now, at the end of this video I am gonna connect the slide to some 12 volt power just to show you how the light bar works, how bright it is. But at first I wanna go over some of the features of it. So we're gonna zoom in, you can see it up close.
This light bar does use the COB LED technology which is chip onboard technology. This will create a nice, bright solid panel of light. The LED chips, if you notice are mounted close together for uniform high intensity light, similar to a lighting panel. It is a nice seal lens in housing unit which is waterproof. Has an IP69K rating to stand up to severe environmental conditions and cleaning methods.
And if you notice it has a tinted polycarbonate housing which provides a nice sleek look when this is installed. Now, this is a simple installation, comes with the included automotive grade 3m tape, the mounting clips, the connectors you need. What's nice, it also comes with this quick connect custom fit wiring harness that'll plug into your vehicle's existing light connections. And on this end has the four way plug that the light bar four way will plug into. So basically there's no cutting or splicing of any wires.
Application, this is for full size trucks, the dimension again, the length of this light bar is 60 inches long, width of it is only five eights of an inch. Height is only three eights of an inch. Now, I would've mention the backup light. The backup light color is a cool white color and it has an output of over 3000 lumens so it's very bright. I am gonna show you that also. So we are connected to some 12 volt power. So now what I'm gonna do is go ahead and turn on our power. Now with our power on you'll be able to see the light bar all lit up. I am gonna go ahead and turn off the overhead lights just so you can see the light better. So now with the overhead lights off, you'll be able to see the light bar all lit up. This is what it would be look like when your tail lights are on or your running lights. And then when you hit your brakes, you'll notice that the slight bar will get brighter just like your brake lights will. And then when you go to your turn signals, what you'll notice, is when you go ahead and hit your passenger side, you'll notice the amber lights, it's a roll of amber lights right under the red lights that'll come on and flashes your turn signal. And then when you do the driver's signal, you see the driver's turn signal is the same way, it's a roll of amber lights right under the red lights that'll flash as a turn signal. And then I wanted to mention that backup light as I mentioned earlier, you'll notice when you go into reverse and your backup lights come on, you'll notice how it's a very nice, cool white color, bet you notice how bright it is. As we mentioned, it's over 3000 lumens. So when you do go into reverse, pretty much anybody behind you will be able to see that you're going in reverse. We'll go ahead and turn back on our overhead lights. Turn off our power. But that should do it for the review on this Putco 60 inch long direct fit blade LED tailgate light bar..
Easy to install and works great.
We loved it I got it for my husband as a birthday gift and he really likes it. Thank you
The jury is out as far as long term integrity of the light bar, but the unit appears to be of good quality, and I was able to verify functionality using my 7-pin receptacle on the rear of my pickup. The one major problem I have with the unit is no clear cut procedure provided to hook up the backup light. The center pin of my 7-pin connector is not terminated, as are most 7-pin trailer connectors. News flash...most trailers do not incorporate backup lights. I had to connect the white wire to the 12V receptacle lug on my 7-pin connector to confirm that it worked and had to spend a lot of time and research to track down a wire in the rear taillight harness that I can terminate the white wire. Much more detailed information, pictures, and online resources need to be provided to the buyer so he/she can easily hook up the light bar. Also, the shipping container was severely damaged when the light bar arrived. One end was completely open! Fortunately, none of the contents were missing.
the light arrived on time as always from etrailer . the light was easy to install all though the instructions were not as detailed as I think they should have been . but very pleased with the product it is as advertised no wires to cut just pug and go fit my 2020 ranger perfect.
Perfect fit! There are two positions, one a couple of inches further out. Since I was looking for one that holds a heavier weight (this takes 400 lbs), I decide not to keep it further out. But positioned fully inward works well and it ends where my spare tire ends on the back door of my camper. Also, I use the locking hitch pin to prevent theft, It uses the same key as my Jeep, and is another great product from etrailer.
The product is working well and it is of better quality and looks better than any other vehicle I have seen with similar light bars
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.