Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement Rubber Puck Plug Cover for Elite and Signature Series Fifth Wheel Rails by Draw-Tite and Reese
Replaces 111442
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi, there. I'm Michael with etrailer.com. Today, we're going to take a quick look at these replacement puck plug covers. These little rubber covers are designed to replace the covers for your puck system that holds in your fifth wheel. This is designed to replace the puck plug covers for your Elite or Signature series fifth wheel rails by Draw Tite or Reese. It will fit with the 16,000 pound, the 18,000 pound, and the 24,000 pound signature series.
But some of our customers have noted that these will work for other systems as well. Some of the Ford factory puck systems, these will help to cover up the puck hole there so that you can make sure that nothing's getting inside there.I do want to make sure to give you some measurements to know if this will work for your setup or not. So I'm going to say that these are right about one and five eighths of an inch in total width for our plug here. And I'm going to call it right about an inch for our width. And it sticks out.
We'll call it about five eights of an inch. You can see that better there.So make sure that that's going to work for you, but these should do a really good job for you, making sure that you are able to close up those puck plugs, make sure that nothing's getting inside there when you're not using your fifth wheel hitch. You can see they are kind of an oblong shape rather than round, like some of your factory system plugs might be, but if you're needing new plugs, these are going to be a great option for you.That's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Been looking a long time for these.
Excellent service. Exactly as described and arrived quickly. Reese trim rings and plugs fit Ford OEM underbid hitch as described and fit better in my opinion. I wish they would make a replacement trim ring for the OEM gooseneck receiver.
Rich 
12/6/2017
Parts are great. I’m using them with my OEM underbed hitch adapter. They fit perfectly and stay in place better than OEM parts. Just wish Reese made a trim ring for the gooseneck hole to go with their plug.
Rachael H.
12/7/2017
Helpful Links
These worked just fine as replacements for the puck system hole plugs that came with the factory installed 5th-wheel hitch system on my Ford F-250.
Mark
9/9/2020
Still serving their purpose. They sometimes get pulled out by pallets sliding into the truck bed, but they are tough and I just re them.
I had been looking for both products for some time. The Puck Plugs I searched for over six years till I found the companies website and phone number. Everyone I contacted did not know what I was taking about. At the same time, on your website, I saw that you had the smaller center caps I had also been looking for for awhile. The originals that I had were plain steel and rusted to where I had to paint them. Stainless should be a lot better. Sometimes if you do not know the correct names of the products you will never find them.
J K.
3/27/2014
I love the 5th wheel hitch I have had for 14 years.The pucks were important as they plug the bed where the hitch goes.To this day I stand by my original comments.
The cover the puck holes and stay in place just as advertised.
I haven't had a chance to use the ball and safety chain hooks yet, but I am very satisfied with the service and delivery of my order. No problems at all. I did fit everything and it all fit as it is supposed to.
Thanks etrailer
The product was an exact replacement. The service That I got from Etrailer on even an item as small as this was great. Good communication, rapid shipping and friendly follow up afterwards to make sure I was satisfied. Thanks!
Paul B.
7/28/2021
A year in and still very happy with the condition of the parts, still fit great!
Excellent product. Fits pucks perfectly. Excellent service as well
Dean
8/26/2024
It worked great. Fit was perfect and it serviced our needs.
Just what I needed so that when I take the 5th wheel hitch out, I can have the hole covered.
Thomas
10/26/2019
Just sold the truck but the pucks were like new
Always a good transaction. From selection and price to the quick, reasonable shipping a great experience. It’s why I am a return customer.
The trim rings and plug covers fit perfectly on my 2016 F-350 OEM puck hitch anchor points. There was a delay on the trim rings as the manufacturer delayed delivery to etrailer. George J proactively kept me informed of the delay and when they would be available for shipping. He was quick to answer questions via email...much appreciated. Good customer service from etrailer.
Fits perfectly!
The plugs do plug the pucks under the bed of my Ram 3500. Unfortunately I was searching for plugs to fill the bed holes, not the pucks themselves. These plugs came up because vendor's do such a good job of criss-crossing keyword searches. The product description could be much more specific to allow the buying public to actually know what we are buying. I received very prompt notice the product had shipped. Unfortunately that notice was sent almost 24 hours before the product actually started moving. Ups/USPS shipping is perhaps the slowest possible way to ship something but the product did arrive when predicted. Summation: product as advertised. Product description vague. Shipping slow but on time.
Thank you for the quick shipping and excellent customer service. The Reese Gooseneck plug and bed filler plugs worked perfectly on my factory installed hitch in my 2011 F350. I will be back for future trailer needs! Thank you!
These only fit the cab side mounts. the rear side mounts are slightly bigger than these. I would order a set for the rear if you have them.
Victoria B.
8/9/2019
These Replacement Puck Plugs are designed to fit Reese Under-Bed Rails for the Elite and Signature Series 5th wheel hitches. I confirmed with my contact at Reese that all 4 holes in those rails are the same size, so these pucks can fit in any of the puck holes.
They work like they should, no problems, look good, and are holding up fine after one year in the back of the bed exposed to the elements. They are a nice addition to the bed, covering up the holes for the gooseneck.
Here's the thing...these are simple parts. They are cheap and will last forever if you don't lose them. BUT, if you DO lose them etrailer makes replacing them quick and easy.
Dan
6/26/2017
Not surprised these are still perfect after one year. Theyll last forever.
This product is exactly what I needed. One of my puck covers was lost while the vehicle was being worked on at a maintenance shop. So, I elected to order another full set. The original puck covers are old and drying out. I always believe in having spare parts. One never knows when something like this is going to happen. The Postal Service delivery system was a little slow getting the products to me, but, good thing this was not an emergency. The Reese Elite system is the only one to own.
I purchased these as a “just in case” the OEM version disappeared. I still have my OEM version, but it’s nice to have an affordable option for a spare or backup. I did test fit these and they fit very well in the puck receivers for a RAM 2500.
These work great to cover the open receiver puck holes in the bed of your truck. They can dislodge pretty easily when dragging things across the top of them. Buy a few extra because it is easy to lose one or two.
Rich L.
6/3/2015
They work fine. I have been careful to not dislodge them and lose any more pucks. They are just the thing when you want to make the bed smooth and plug the holes when the hitch is removed.
Product is as advertised, they fit.
What else is there to say about rubber plugs!!!
9/8/2019
Works just a plug for a hole should work, honestly its just a plug not much one can say about it.
I didn’t realize the way the truck was designed, it’s supposed to be round, and these replacement pucks are rectangular. Therefore it didn’t hold the outer pieces of the cover. It still works well for its intended purpose though.
Perfect fit for the holes left when we removed the 5th wheel hitch base rails from our Ford 350 truck bed.
I used these to replace the four attachment point covers from the FORD OEM underbed kit. They work great, as advertised. They are not the same shape on top but they work fine.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Eric
7/25/2025
Still working good.