Puck Covers that Can be Used to Cover OEM Pucks of 2020 Ford F-250

Question

Question:

I have a 2020 ford superduty 6.7 diesel. I bought it used. It came with a 20K curt 5th wheel on pucks. What covers do I need to purchase for it? Is there more information required?

asked by: Robert H

0

Expert Reply:

Since Reese makes the Ford OEM puck rail kits you can use the Reese Elite puck covers part # 58199 and you'd be set.

expert reply by: Jameson C

0

Answer 1

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Answer 2

We do have the covers for the pucks as well as the gooseneck hole for the Ford puck system. You will need the following: - Two of the Replacement Puck Plug Covers #58199 - Rubber Hole Cover #RP30136

view full answer...

Answer 3

Great questions! Reese actually makes the OEM puck system for Ford so if the 2022 F-250 is cheaper by a lot then I recommend going that route and installing the Under-Bed Rail and Installation Kit #RP87FR. The only thing you'll really be missing…

view full answer...

Answer 4

For your 2021 Ford F-250 short bed that doesn't have the OEM rail kit the Curt gooseneck hitch part #C60700 would be a really great option. It's similar to the OEM gooseneck your truck could have been equipped with and it even installs in the…

view full answer...

Answer 5

We offer the side brackets that come with the Reese Elite Rail Kit part #RP39FR with the part #RP27FR but we do not have the bolts and other hardware. I did attach a picture that shows all of the other hardware listed out that you could take to a…

view full answer...

Answer 6

Reese Elite Made their puck system to match the the OEM version, you can use Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails part #58199 to cover the holes. You will need Rubber Hole Cover for Reese Elite Series…

view full answer...

Answer 7

We do carry some nice heavy duty rubber plugs to protect the factory prep package on a Chevrolet Silverado. For this, you can use the Rubber Hole Cover part #RP30136 for the gooseneck hole and the Puck Plug Covers part #58199 for the pucks.

view full answer...

Answer 8

The Reese #RP30156 puck to rail mounted 5th wheel hitch adapter would indeed be fully compatible with the Reese #RP30051 sliding 5th wheel hitch. Both would work perfectly with the puck system in your 2020 Ford F-350, but if your truck is the long…

view full answer...

Answer 9

Yes, the Adapter Rail for Curt 5th Wheel Hitch's part #C88KR which is a fit for a 2021 Chevrolet Silverado 3500 will work with a Reese 16K 5th Wheel Hitch. They are simply above bed rails so they will work with Curt, Reese, Husky etc. hitches.

view full answer...

Answer 10

We do have the white Replacement Exterior Half-Moon Trailer Vent for 3" Diameter Hole #WHMAV2 which is the white version of the #HMAV2 that you referenced and also is what you sent in a picture of so it would work well for you.

view full answer...

Answer 11

First, I need to know if the truck in question has been lifted or if it just happens to be taller. Also, if it is lifted, I need to know if it is a suspension lift or body lift. If it is a body lift you will not be able to install a 5th wheel hitch…

view full answer...

Puck Covers that Can be Used to Cover OEM Pucks of 2020 Ford F-250

Product Page this Question was Asked From

Continue Researching