To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
The PullRite ISRX SuperLite 5th-Wheel Hitch makes hitching quick and frustration-free. The included coupler bolts around your trailer’s king pin to create a new connection point, while the open funnel on the hitch head guides the ball right into place. You can see what you’re doing from the cab, so it’s easier to line up and connect without all the back-and-forth.
This setup doesn’t tie your truck down. The base weighs just 79 lbs, so you can lift it out when you need the bed for a weekend project or a load of supplies. It removes in just a few steps, keeping your truck flexible for whatever work or travel plans come next.
Built from black powder coated steel and tested to SAE J2638 standards, this hitch is rated for 20,000 lbs gross towing weight with a 6,000 lbs vertical load limit. It gives you solid strength for towing large fifth wheels without compromise. The durable finish helps it stay looking sharp and protected through years of use.
Getting your trailer level and tracking true is simple with multiple height settings and up to 7-1/2" of offset adjustment. That flexibility lets you fine-tune your setup for a smoother, more controlled towing experience.
The included industry-standard rails and brackets are made to fit your vehicle for a secure, custom installation. Once mounted, you’ve got a stable fifth-wheel connection that’s ready for serious miles on the road.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the PullRite Custom Installation Kit with the Base Rails for your 5th-wheel trailer hitches as a 20,000 pound gross towing weight capacity. Now, this is a custom-fit part. This is designed to fit the 2021 and newer Ford F-150 trucks with the 6 1/2 foot bed. And on a custom-fit part like this, I do like to recommend for you to go to our website and use the fit guide. Put in your year and model vehicle, and it'll show if this will work for your application.
Now, this installation kit is designed to let you mount your 5th-wheel trailer hitch in the bed of your truck. The mounting brackets on the side here, these I've installed already to the rails. These will install beneath your truck bed to provide attachment points for the above-bed base rails. And then the base rails themselves, the two right here, these will provide the necessary mounting points for your 5th-wheel hitch. Now, the mounting brackets we mentioned, these are custom-fit mounting brackets.
They're designed to mount to existing holes in your vehicle's frame, so it'll help minimize drilling and measuring, reduces the installation time, and it avoids any known obstacles along your truck's frame. Now, one of the best features on this PullRite kit, what I really like, is they have these built-in tabs at each corner on the mounting brackets. And what those tabs do is they're right below the slotted bolt hole where this bolt goes. And these tabs will eliminate one of your biggest problems when installing mounting brackets to your vehicle, which is how to keep the nuts in place when installing the bols of your mounting bracket. So if I zoom in here on this one right up here, and this is on all four corners, but if you look closely, there's a very bottom tab here that's a metal tab.
You'll pull that down, and then you can slide the nut into the slot. And then you push it back up, and then that nut will be held in place. So when you go to put your bolt in and tighten it down, you don't have to worry about being underneath. 'Cause lots of times when you install these brackets, there's no room. So with this tab here, it'll hold the nut in place while you tighten your bolt down.
And just to show you a better picture, I'm gonna pop up an insert to show you the underside of what we're talking about. So right up in here, that insert is showing you underside. And you can see the cut-out, and then you can see the nut that's in there that's held in place with that cut-out in the tab. Now, this kit is compatible with the PullRite, the B&W Patriot, the Curt, Demco, Draw-Tite, Hidden Hitch, Husky, and even the Reese above-bed 5th-wheel hitches. These parts are a black powder coated steel construction. They are corrosion resistant. It does include everything laid out here on the table. The two base rails right here. Right in here, these plastic pieces, these are base rail spacers that you'll put under the base rails when you install it into the bed. The custom mounting brackets we mentioned. Over there, we have the hardware and we have a nice set of detailed instructions that'll describe how this all goes together. Now, these parts are made in the USA. And again, the gross towing weight capacity on this kit is 20,000 pounds. But that's gonna do it for a look at the PullRite Custom Installation Kit with your Base Rails for the 5th-Wheel trailer hitches.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.