Connecting Tractor With 7-Pole Round to Trailer With Electric Brakes
Updated 11/17/2025 | Published 12/21/2024
Products Featured in This Question
Question:
Hello, I have the same situation to connect tractor 7 pin to 6 blade for car hauling trailer with electric brakes. Where I can order this converter ?
asked by: Sergey
Expert Reply:
Hi Sergey; it sounds like you have a 7-pole round on your tractor and then either a 6-pole round or 7-way blade on the trailer. The # 119178 you ordered will combine your brake light and turn signals so that is a good start.
Since there are no adapters available as is you will have to make one just like in the other question you looked at. You will need the # PK11700, # DW04914-1, and then # PK11893 (if the trailer has a 7-way blade) or # PK11609 (if the trailer has a 6-pole round). You can use the wiring diagram below to help match up the functions between them.
I'm also not sure how you're connecting your brake controller but you may want to pick up # 10-1-1 to run a separate brake output wire back to your connector. Alternatively, since you already have the # 119178 you could go ahead and install a completely separate 7-way blade (assuming that is what you need for the trailer) using the # ETBC7.
(click to enlarge)
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Shop: Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End
- Shop: Roadmaster Brite-Lite 3-to-2 Tail Light Converter for Towed Vehicles
- Shop: Wheel Bolt, 1/2" x 1-5/8" with Right Hand Threads
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Shop: Brake Controller
- Shop: Trailer Wiring
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Shop: Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Vehicle End
- Shop: Pollak Heavy-Duty, 7-Pole, Round Pin, Trailer Wiring Connector - Trailer End
- Shop: Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End
- Shop: Pollak Circuit Breaker - Cycling/Automatic Reset - 30 Amp - Straight Mount Bracket
- Q&A: How to Make 7-way to 6-Way Adapter for Semi Truck to Gooseneck
- Q&A: Replacement for Atwood Coupler With 2-5/16 Inch Hitch Ball Attachment
Robin H.
11/17/2025
Hey Sergey, how did things go with building the adapter for your tractor and car hauler trailer? Your update could make it easier for others trying to match a 7-pole round to a 6-blade or 7-way blade setup.