Which Trailer Hitch Receiver Fits 2025 Hyundai Santa Fe Hybrid

Question

Question:

Do you have an etrailer branded hitch to fit a 2025 Hyundai Santa Fe Hybrid SEL?

asked by: Glen

0

Expert Reply:

Hi Glen,

We have a trailer hitch fit for your 2025 Hyundai Santa Fe hybrid, but not an etrailer-branded hitch. The hitch that fits your Santa Fe is from Curt, and is the following part number:

- Curt Trailer Hitch Receiver # C37RV

expert reply by: Kyle S

0

Glen

9/3/2024

Ok-the installation video refers to a flat black powder coat version so I am confused.

Reply

Kyle S.

9/3/2024

@Glen There used to be one but it was discontinued, which is why the video mentions it.

Reply

Answer 1

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 2

Hey Charles, yes we do have the Curt trailer wiring harness part #C98RV that is a confirmed fit for your 2024 Hyundai Santa Fe.

view full answer...

Answer 3

Hi Alberto; the Curt #C37RV is what you need for your 2024 Hyundai Santa Fe Caligraphy Hybrid. Curt redesigned the older hitch so this fits all models of the 2021-2025 Santa Fe, including your Caligraphy Hybrid. This is a Class III hitch with a…

view full answer...

Answer 4

Aaron yes, the Hybrid and Non-Hybrid Hyundai Santa Fe's can use the same hitch. As far as wiring goes, I'm not seeing anything that is custom so you'd be limited to a universal harness #C47NR.

view full answer...

Answer 5

Hey Roger, Yes, the Curt Trailer Hitch Receiver #C37RV is listed as a fit for all models of the 2025 Hyundai Santa Fe. If you plan on installing this yourself then I recommend checking out Ryan's installation video below for step-by-step…

view full answer...

Answer 6

Hey Rick, the Curt trailer wiring harness part #CU94FR is a confirmed fit for your 2024 Hyundai Santa Fe Hybrid Limited and would be the best option as it's very easy to install.

view full answer...

Answer 7

Hey Steve, yes the exhaust does need to be lowered to install the Curt Trailer Hitch Receiver #C37RV. The easiest way to do this is to use an exhaust hanger tool which can be found at just about any hardware store. If you can't get a set of…

view full answer...

Answer 8

Hey Robert, there does not look to be a custom wiring harness for your 2025 Hyundai Santa Cruz, unfortunately. What you'd have to do is first use a universal wiring harness #119250KIT and then you can add a 7-way with the Curt Trailer Connector…

view full answer...

Answer 9

Hey Chris, the CURT Class 3 Trailer Hitch #C37RV won't require any bumper modification, but the etrailer Class 3 Trailer Hitch will require some underbody panels/fascia to be trimmed for install.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Which Trailer Hitch Receiver Fits 2025 Hyundai Santa Fe Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching