Curt Fusion Ball Mount for 2" Hitches: The Breakdown Video

Hey Bob, the BulletProof adjustable ball mount part #BPH37MR weighs 17 lb.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I'd recommend using some dielectric grease, like part #11755. Not only will the grease prohibit moisture from entering the connections and protect them from corrosion, it will make the connection easier to plug together or to separate.

We have a very wide variety of ball mounts to choose from. Finding the correct one will depend on a few things though. First you will need to know the distance from the ground to the top of the inside of the trailer hitch once installed. Next, you…

Yes, the EcoHitch Hidden Trailer Hitch Receiver item #306-X7322 will fit your 2022 Honda HR-V. It is custom fit and bolts directly to your Honda with included hardware.

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

To choose the correct rise/drop for a ball mount you'll first want to park both your 2015 Subaru Outback Wagon and your single jetski trailer on level ground and then take some measurements. For your Outback Wagon you want to measure from the…

Trailer Hitch Pins like the Curt #C21500 do not have specific weight ratings and there is not a database available that will have this type of information. Generally speaking, a 5/8 inch diameter pin, which is designed for Class III, IV and V trailer…

It will not matter if your trailer is loaded or unloaded when measuring, you will just want the trailer to be level when measuring for the proper rise or drop ball mount. The trailer jack will be supporting the trailer and holding it level regardless…

For a 2 inch ball mount that offers a 1 inch rise/2 inch drop and a 12K capacity, I'd recommend the Draw-Tite #4284. For a 2-5/16 inch ball, use #19286 which also has a 12K capacity. If you don't need that much capacity, go for the Curt…

Yes, if you are talking about using a ball mount like the Curt Ball Mount for 2" Hitches #C45030. This type of ball mount can be used in either a rise or drop orientation to achieve the correct height to level the trailer. The 2" Hitch Ball…

I'm not sure if you're looking for a 3" rise or drop but we have options for both so you don't need to worry about being off by an inch. For a ball mount with a 3" rise you can use the #40331. You will also need #C48810 for a…