Recommended Ladder Rack And Tonneau Cover For A 2024 Nissan Frontier Pro-4X

Question

Question:

I have a 2024 Nissan Frontier Pro-4x short bed. I live in an area with snow and ice. I want a hard tonneau cover and a ladder rack. I carry kayaks and electric bikes. Can you give me some compatible options to choose from?

asked by: Sean K

0

Expert Reply:

Hey Sean,

For your 2024 Nissan Frontier Pro-4X I recommend the TruXedo Elevate Truck Bed Rack System # TX38NV along with the BAKFlip G2 Hard Tonneau Cover # BAK64AV. If you have a Utili-track system in the bed you may have to remove it in order to install the cover and ladder rack. Some times they mount the track too close to the bedrail lip and it interferes with the mounting brackets for the cover/ladder rack.

The Elevate system has adjustable height (18" or 28") towers that will allow you to haul the kayaks above the cab or lower them down to make loading your bikes onto the crossbars. The G2 is a hard folding aluminum cover capable of handling the weight of built up ice and snow.

expert reply by: Kevin C

0

Sean K.

6/22/2024

Kevin, Thank you. That is the set up I was considering. The top of the rail channel is approximately 1.75" below the bottom of the bedrail. Is that enough clearance? If not, do you have a suggestion that would not require me to remove the utilitrack? Thank you and take care, Sean

Reply

Kevin C.

6/24/2024

@SeanK 1.75" would likely give you enough room to install the cover and ladder rack but I can't confirm it. In the attached video below for the cover you can see Brad was able to get it installed with no difficulty. There unfortunately isn't an another option for the ladder rack that would be compatible with a cover. You could swap to a different cover but the clamps would still have the same potential issue.

Reply

Answer 1

Yes, you do Eric. None of the 2025 Nissan Frontier's without the trailer connectors came with the wiring relays. Nissan's been doing this for quite awhile to save production costs. To add a 4-way connector that includes the wiring relays,…

view full answer...

Answer 2

Hello Neil, As a matter of fact we do, and it looks like you already found it! The Westin HDX Modular Grille Guard with Punch Plate - Black Powder Coated Steel #W33GC will fit your 2025 Nissan Frontier PRO-4X model. Congrats on the new truck! What is…

view full answer...

Answer 3

Hi Jake; for your 2025 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED53CR. This brake controller is easy to use and incredibly reliable. It also includes a plug and play wiring harness which will fit the tow port under…

view full answer...

Answer 4

Hi Tom, We do have a hitch and wiring for your 2024 Nissan Frontier, though the only wiring harness fit is a hardwire application and is not plug-and-play. For both parts here's what you'd need: - Curt Trailer Hitch Receiver #13241 - T-One…

view full answer...

Answer 5

Norm, thanks for hanging out! Along with one fitting different brands of trucks the Trail and Elite are also different. The Tow Pro Trail # RED94UR is designed to be used primarily off-road, specifically engineered and tested for off-road adventures.…

view full answer...

Answer 6

Hey Kevin; the Redarc Tow-Pro Trail Brake Controller #RED94UR does include the custom wiring harness for your 2025 Nissan Frontier. If you have the tow package with the factory 7-way then you're all set. If you don't have a 7-way you will…

view full answer...

Answer 7

Hi JD; if I had to choose between the Leer Hard Tonneau Cover #LE67FR and BAKFlip MX4 #BAK448133 I would go with the MX4. As far as security goes both are locking covers so it will be about the same between the two. The MX4 has seals and drain tubes…

view full answer...

Answer 8

Hey Jim, yes we do have a 7-way trailer wiring harness that fits your 2024 Nissan Frontier with the Tekonsha part #118266 which comes with all of the needed relays and harnesses.

view full answer...

Answer 9

That's because the Curt item #C56225 fits the 2005 - 2021 Nissan Frontiers. The correct one for your 2023 Nissan Frontier is the T-One Vehicle Wiring Harness item #118525 for a 4-Way or item #118266 for a 7-Way. I have linked a couple of…

view full answer...

Answer 10

For a great folding cover for your 2022 Nissan Frontier (short bed), I recommend the BAKFlip MX4 #BAK94AV. The MX4 includes a tri-fold design that lets you access the bed without fully removing the cover. There is also a locking system that creates a…

view full answer...

Answer 11

Yes, the Yakima OutPost HD Overland Truck Bed Rack with Tonneau Cover Adapter part #Y01152-5855 is compatible with the TS Rails for TruXedo Elevate Rack Systems like part #TH65FR. The channel dimensions are relatively standard so you can use most…

view full answer...

Answer 12

Usually ladder racks use the inside edge of the top of the bed site to attach to the vehicle, but luckily there are exceptions to that. The Thule TracRac SR is typically compatible with tonneau covers that mount to the inside edges of the truck bed.…

view full answer...

Recommended Ladder Rack And Tonneau Cover For A 2024 Nissan Frontier Pro-4X

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching