How to Choose Weight Distribution For 2017 Jeep Grand Cherokee  

To determine if you need rise, you will measure from the inside top of the receiver on your vehicle and then from the ground to the bottom of the coupler on the trailer. This should be done on as level a surface as possible. The difference will tell…

I think you'll need to go up a level in weight rating for your 5,000 lb GVWR Airstream travel trailer. The reason being the Reese Pro Round Bar Weight Distribution #RE34FR is for loaded tongue weights between 200 lbs and 600 lbs. I assume the 520…

You always want to base your weight distribution system (WDS) off of the GVWR as that's what the trailer will be when fully loaded, and really when you need the WDS the most. When I looked up your 2022 Jayco Feather Micro 171BH Jayco has it…

When it comes to maintenance on The Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 8,000 pounds GTW, 800 pounds TW #RE94FR you will first need to keep sockets in head assembly free of dirt and well lubricated in rotating or…

For a round bar weight distribution system that would work really well with the tongue weight rating of the 2017 Rockwood Mini you mentioned the Reese part #RE34FR that you referenced and is a really solid choice. If that weight is the unloaded…

The Reese weight distribution system part #RE94FR is the best value for your Rockwood Geo 19FD and would be what I would go with if I were you. It's just as effective as the Fastway e2 part #FA94-00-0600 but at a much better price.

While Reese does not offer replacement spring bar retainers for their Weight Distribution Hitch 49912 #RE94FR, I do know some have used the Curt Spring Bar Retainer #17109 to replace them. These have a very similar design to hold the retainer pin in…

The Reese Pro Round Bar Weight Distribution System part #RE94FR is rated for up to 800 lbs of tongue weight. If the tongue weight of the trailer is 750 lbs than this system would technically work but it does not leave much room for error or upgrading…

The Reese Weight Distribution System w Shank - Round Bar part #RE34FR does not utilize friction sway control. It is simply a weight distribution system that will redistribute the weight of your setup with the spring bars which will help to reduce…

The weight distribution system that has the best sway control and is properly rated for your tongue weight that will be between 450 and 500 lbs is the Reese Strait Line part #RP66083. This would be my first pick as your best option as it has a tongue…

The frame brackets on the Reese round bar #RE94FR need to be located between 24-1/2" and 27-1/2" from the hitch ball. If you do not have room for the brackets we do have the Blue Ox Trackpro #BLU67FR. The frame brackets on the Blue Ox need…

Hey Mike, so a friction sway control unit like the part #83660 can help stop some of the sway that starts from wind or passing semis but if you are experiencing persistent sway once you hit a certain speed that will only be fixed by increasing the…