Trailer Jack and Dolly Recommendation for a Hi-Lo Trailer with Limited Tongue Space
Updated 04/15/2014 | Published 04/13/2014 >
Products Featured in This Question
Question:
can trailer valet swivel jack be mounted on either of trailer? can it be mounted on a hi-lo trailer? I only have 6 maybe 6.5 inches of tongue available to mount the bracket.
asked by: Tom L
Helpful Expert Reply:
The Trailer Valet Jack, # STC-V211, takes up 7-1/4 inches of the frame rail and it can mount to any trailer frame rail up to 2-3/4 inches wide and up to 6 inches tall. Since you only have about 6 to 6-1/2 inches available, this may not work for you.
We do not carry any other jacks that function like the Trailer Valet, but another jack that you may be interested in is the Fulton Bolt-Thru Swivel Marine Jack with Dual Wheels, # FXPD15L. This jack has a slightly shorter lift height of 12 inches and a weight capacity of 1,500 lbs, which is significantly larger than the Trailer Valet.
If you also want an option that will allow move the trailer around without hooking it to a trailer hitch, you may be interested in a trailer dolly like the Rack'Em Trailer Dolly, # RA20. This dolly has a maximum weight capacity of 500 lbs, so the tongue weight of your trailer cannot exceed that weight. I have attached a review video of this dolly for you to check out.

Product Page this Question was Asked From
Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Trailer Dolly
- Manual Dolly
- 5000 lbs Capacity
- 15 Inch Tall
- Steel
- Silver
- Trailer Valet
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Mounting Instructions for Trailer Valet XL with Mounting Bracket
- Q&A: Best Place on a Boat Trailer Frame to Install the Trailer Valet Swivel Jack and Trailer Mover
- Q&A: Solution for Front Hitch on 2024 E-450 Class C Motorhome
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Battery Life for the RVS Wireless Hitch Camera with Magnetic Mounting
- Q&A: Drill Attachment to Use with Trailer Valet Trailer Dolly STC-V211
- Q&A: Does the Trailer Valet 5X Have to Stay on Trailer and Which Side Does It Need Mounted?
- Q&A: Bolt-On Side-Mount Dual Wheel Trailer Jack Recommendation for Utility Trailer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Article: Determining Trailer Tongue Weight
- Article: Best Boat Trailer Jacks
- Article: Trailer Hitch Installation Tips