Determining The Correct Replacement landing Gear Set For A 1995 Fleetwood Terry 5th Wheel Trailer

Question:

What landing jacks do I need for a 1995 Terry by Fleetwood 5th wheel 32.5 ft

asked by: Michael D

Expert Reply:

To determine the correct replacement landing gears for your 1995 Fleetwood Terry you'll want to measure the inside to inside and outside to outside measurement of the weld stops on your current landing gear set so we can see if there's a match that can just reuse your current mounting brackets. If there isn't you would have to cut off he current brackets and have a qualified welder weld on new brackets, which can drastically increase the cost.

The standard for most landing gear sets is 15-1/2" from bottom of upper weld stop to top of lower weld stop and 17-1/2" from top of upper weld stop to bottom of lower weld stop. If this is the case for you then you could use one like the Landing Gear Set w/ Handle # RVLG-8HDL along with the motor # LC142178.

let me know what your measurements are and I'd be happy to find a replacement for you.

expert reply by: Kevin C