Will The 75CFM Motoro and Fan Fit In Place Of The 50CFM Fan on a Ventline 2280-50?

Question

Question:

Can I just buy a 2280-75 nd out the motor and fan assembly into the existing 2280-50 housing in my ceiling or do I need to buy all the parts install them on the existing motor/fan mount?

asked by: Marty

0

Expert Reply:

We have found the 75CFM Motor # VC0369-00 to be able to replace a 50CFM Motor # BVC0367-00 which you have in your 2280-50 Ventline. It will fit with the Impeller Wheel # VC0359-00.

expert reply by: Bud M

0

Answer 1

The correct replacement fan motor you need for your Ventline Breeze that has a 50 CFM fan is the part #BCD0388-00. The mounts are different and the electric connector is different so you wouldn't be able to use the #VC0369-00 instead.

view full answer...

Answer 2

For a direct replacement fan motor on your V2280-50 Ventline you need the Replacement 110-Volt AC Fan Motor #BCD0314-00. If you'd like to upgrade to a little more power you can use the Impeller Wheel #VC0359-00 and the Motor #VC0369-00 which…

view full answer...

Answer 3

Hey Dawn, in the past we have determined that the correct replacement fan blade for the Ventline V2244-50 is the part #BVA0311-02.

view full answer...

Answer 4

You can upgrade your 50 CFM kit to the 75 CFM motor part #VC0369-00 like you are wanting from your Ventline setup. It wouldn't be noticeable louder either.

view full answer...

Answer 5

We do have some parts that you can use to change out your Ventline V2280-50 to a 75 cfm. I spoke with my contact at Ventline who said if you switch out the Impeller Wheel with part #VC0359-00 and the motor with the 110V Motor #VC0369-00 you can…

view full answer...

Answer 6

The Replacement Motor for Ventline Breeze 360 Bath Fan #VC0369-00 has a splined shaft that is 3/16 inch diameter and 1-1/4 inches long. It is designed specifically to use the Replacement Impeller Wheel for Ventline 360 Bath Fans #VC0359-00. It…

view full answer...

Answer 7

I'm not sure which replacement part you're looking for, but we do offer a Replacement Impeller Wheel for Ventline 360 Bath Fans #VC0359-00, and the Replacement Motor for Ventline Breeze 360 Bath Fan #VC0369-00. To replace the fan motor, you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Bruce, thanks for reaching out! I spoke with my contact at Ventline and they did say that the Ventline Breeze LED 360 Bathroom Vent w/ 120V AC Fan #VE86FR is one of the louder fans on the market, although they don't have an official sound…

view full answer...

Answer 12

Great question, William! The Karrier ST225/75R15 #KE63KV is a KR35 while the Karrier ST225/75R15 #AM10303 is a KR03 according to Kenda. There is a slight variation in the tread pattern and from what Kenda says about them it looks like the KR03 is…

view full answer...

Will The 75CFM Motoro and Fan Fit In Place Of The 50CFM Fan on a Ventline 2280-50?

Product Page this Question was Asked From

Continue Researching