Velcro Replacement for Access Vanish Tonneau Covers

Question

Question:

Velcro replacement for 2017 dodge ram pickup with access vanish tonneau cover? What part is correct?

asked by: Jessica W

0

Expert Reply:

The correct replacement Velcro for the Access Vanish tonneau covers is part # A60270.

expert reply by: Jameson C

0

Answer 1

We have the part #A30474 which is a 1-1/2 inch wide Velcro strip replacement for Access tonneau covers like what you have. The overall length is 17 feet but is designed to be cut down to size as needed.

view full answer...

Answer 2

Replacement Velcro strip #A60270 does not have an adhesive back. It fits into a channel on the side rails on Access Tonnosport and Vanish tonneau covers. If you can tell me which tonneau cover model you have I can determine if we have the replacement…

view full answer...

Answer 3

Replacement Truxedo Shur-Bond Velcro Brand Fastener #TX1117876 is the same 1 inch width and it is the hook portion only just like #A60270 which is the Access replacement part. So it will fit its just that the 2 parts, the Tonneau cover and strip,…

view full answer...

Answer 4

I reached out to my contact at Access and the replacement cover is #A22020191. The replacement Velcro for the frame is the Replacement Velcro Strip for Access Tonneau Covers - 1" x 17' #A60270.

view full answer...

Answer 5

The only difference between the Access Replacement Velcro Strips #A30474 and #A60270 is that A30474 is 1-1/2 inches wide and A60270 is only 1 inch wide. They are both 17 feet long and come with the 4 screws to help keep them in place.

view full answer...

Answer 6

We have the Velcro you need for your Access Tonneau cover for your 2012 F-150. For the hook portion that installs on the top rail you can use part #A60270 for the 17-ft long and 1-inch wide, and part #A30474 for the 17-ft long strip that is 1-1/2…

view full answer...

Answer 7

We do not offer Leer products or replacement parts but since many tonneau covers do use similar Velcro strips it can be possible to substitute a replacement part from another brand. On the page I linked for you are all such replacement kits like…

view full answer...

Answer 8

Since the Velcro strip in your Tonno Pro tonneau cover is 1-1/4" wide you could slide it out and use the Replacement Adhesive Velcro Strip for Access Tonneau Covers #A20790. This strip has an adhesive backing to help secure it to the railing of…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

It might David but I have no way of knowing for sure without that serial number. The Replacement Key Fob item #RTX36TR matches up with covers that have a serial number of 1701 or higher. There's no other way to identify if this is the one you…

view full answer...

Answer 11

Good morning Michael I can definitely point you in the right direction. There are a few different Extang covers that fit the 2018 GMC Sierra 1500 with the 6.5' bed. Generally, we like to get a model number or serial number from the cover which we…

view full answer...

Answer 12

Hi Grace, For a 2018 Chevy Silverado 1500 and Westin HDX Grille Guard you would need the Replacement Mounting Brackets and Hardware for Westin HDX Grille Guard #57-387pk.

view full answer...

Velcro Replacement for Access Vanish Tonneau Covers

Product Page this Question was Asked From

Continue Researching