Replacement Cover for Yakima Baseline Tower

Question

Question:

sorry, struggling to determine which replacement cover I need. Any idea how to determine?

asked by: Greg Z

0

Expert Reply:

The correct replacement cover/door for the Yakima Baseline tower is the part # 8880620.

expert reply by: Jameson C

0

Answer 1

It looks like you are referring to the Thule Xsporter Pro Truck Bed Ladder Rack - Aluminum - 450 lbs - Black #TH500XTB which is confirmed to fit the 2021 GMC Sierra 1500 with the 5-3/4', 6-1/2', and 8' bed. A similar Yakima version would…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Don, the MOLLE Panel for Yakima OverHaul Truck Bed Racks #Y48DJ includes just one panel.

view full answer...

Answer 5

Your trailer tire size F78-14st is an older tire size. The new label for that tire size is ST205/75D14. They are the same tire basically, but different size label. Your tire size is likely 14 inches instead of 15 inches because to measure the…

view full answer...

Answer 6

When it comes to replacing the door assembly for The Yakima RidgeLine Towers #Y00146, The Replacement Door Assembly for Yakima BaseLine Towers - Qty 1 #8880620 is the correct replacement door.

view full answer...

Answer 7

While we do have replacement parts available for your Yakima BaseLine tower #8880618, I am not sure exactly what part you are referring to. In order to make sure I suggest the part you need, I will just list all the replacement parts we carry! Here…

view full answer...

Answer 8

To replace the knob on your Yakima FrontLoader #Y02103 you will remove the brass nut and bolt that keep the knob secure. If your FrontLoader was made after 2016 you need the #8880766. If it was made before 2016 you will need the #8880226 instead.

view full answer...

Answer 9

There shouldn't be another washer on the Replacement Red Knob for Yakima Frontloader Fork Mount Bike Carrier #8880226. That appears to be part of the internal threads on the red knob itself. To replace this piece you'll just have to replace…

view full answer...

Answer 10

In order to use your Big PowderHound ski carrier with the Yakima JetStream roof rack crossbars you will need the universal MightyMounts #Y03590.

view full answer...

Replacement Cover for Yakima Baseline Tower

Product Page this Question was Asked From

Continue Researching