Solution for Replacement Hub For Spindle With LM67048/LM11949 Bearing Combination
Updated 08/15/2022 | Published 08/11/2022 >
Products Featured in This Question
Question:
I had a wheel bearing go on my trailer and it messed the hub up so I am in search of a new one, although I am having trouble identifying it. It is a 5 on 4.75 bolt pattern, LM67048 - LM67010 inner bearing and cup, 09067 - 09195 outer bearing and cup with a 18543 seal. Thanks
asked by: Ryan
Expert Reply:
The 09067 bearing has an inner diameter of .75" just like the # LM11949. The only option we have that would fit is the # AH15450ECOMP which is an agricultural hub with a 4 on 5 bolt pattern. This bearing combination is old and very uncommon anymore so regular replacement hubs are no longer manufactured.
The best solution is to replace your axle with one that uses standard bearings. This would allow you to add hubs that match your 5 on 4-3/4 bolt pattern like the # AKIHUB-5475-35-K. To find a replacement axle you will need the axle capacity as well as the length and spring seat measurement. The length is the hub face to hub face measurement.
For example, if you found that you have a 3,500 lb axle that measures 95" long with a spring seat measurement of 80" you could use the # e68GR. It is nice if the spring seat measurement matches, but long as the length matches you can use the axle since the spring seats can be removed and # TRSS238 could be welded on where you need them.

Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-3/4 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Search Results: 6k hub
- Q&A: Are Shorter Length Hub Assemblies Available
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Search Results: 17~115
- Search Results: 84550
- Search Results: ts20037b
- Search Results: curt pintle
- Q&A: What Is The Dimensions Of The 4 Bolt Mounting Holes On The Dexter Electric Brakes 23-105-106-09?
- Q&A: How to Determine the Correct Jack Height and Lift Needed for Replacement Trailer Jack
- Q&A: Hub and Drum Recommendation for Dexter 3,500 lb Trailer Axle with Brake Assemblies
- Search Results: b12ea~22
- Search Results: 7845b
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Round LED Strobe Light - Recessed Mount - 6 Flash - Amber Lens - 12V/24V
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Replacement Hubs for Old Trailer That Uses Inner and Outer Bearing LM67048
- Q&A: Replacement 10 Inch 5-on-5 Bolt Pattern Brake Drums for Old Car Trailer
- Video: In-Depth Review of the Pollak Bracket for Single-Pole Trailer Wiring Socket
- Q&A: How to Determine Correct Idler Hub Assembly for Trailer With 3,500 lb Axles