Replacement for Rola Convoy 1-Bike Rack

Question

Question:

I need a replacement part for my Rola 59307 Convoy Modular Bike Carrier. I just need the part that slides on the arm that holds the front wheel.

asked by: Michael B

0

Expert Reply:

Rola discontinued their line of bike racks a while ago so while I do have a solution for you to continue carrying your bike, I unfortunately don't have a replacement part for you. Instead I recommend swapping your bike rack out to the RockyMounts MonoRail Solo Bike Rack # RKY10007 instead. This uses the same style of front wheel hook system to secure the bike to the rack and will work great as an alternative.

Attached is a review video for you to check out.

expert reply by: Jon G

0

David M.

4/11/2024

Hi Jon, Do you guys sell that part or would I need to go to RockyMount direct? Also I am looking for the Add-On Support plate. Thanks in advanve for the help!

Reply

Jon G.

4/11/2024

@DavidM We do have the RockyMounts MonoRail Solo Bike Rack # RKY10007 available here at etrailer. If you click on the hyperlinked part number it will take you to the product page! I'm not quite sure what you mean by the Add-On Support Plate unless you're referring to the 1 Bike Add-On # RKY10005 that expands this to a 2-bike rack. If this isn't what you're looking for can you give me some more insight into what the support plate is? I tried cross-referencing that over on the RockyMounts site and wasn't able to come up with anything over there either.

Reply

David M.

4/11/2024

@JonG Do you sell just the arm hook clamp from the Monorail? You indicated this hook is the same as that used on the Rola Convoy. I need just the arm hook for my Rola Convoy. Rockymounts sell just the arm hook as a replacement part but I thought to start with Etrailer first incase you do sell it. In reference to the Add-On suport plate, this is for the Rola Add-on Unit 59310.

Reply

Jon G.

4/11/2024

@DavidM Ah, I see what you mean now. We used to have the 1 Bike Add-On for Rola Convoy Platform Rack 59310 but since Rola went belly up a few years ago it's becoming harder and harder to find parts as they are all discontinued and we don't have it anymore. What I meant in my statement above was swapping out the entire bike rack to the RockyMounts MonoRail since it is the same style as the Rola Convoy. I can see how what I said could have been mistaken for "the hooks are interchangeable" though so I've gone ahead and updated my wording to make it a little more cut and dry.

Reply

See All (7) Replies to David M. ∨

Answer 1

Hey Jim, If you're needing something right away the Thule hitch pin lock #TH62RE has the same M12 x 1.75mm thread pitch as the original RockyMounts hitch pin and I physically tested it with the lock #RKY12006 and found that it's compatible.…

view full answer...

Answer 2

Yes, this Thule OutWay 2 Bike Carrier #TH45JV is confirmed fit for your 2011 Kia Soul. The top portion of the bike rack will rest on the back glass of your vehicle, but it will not damage the glass of your rear windshield. Most of the pressure from…

view full answer...

Answer 3

Good morning, Diane. That is a good question since the RockyMounts HighNoon #RKY87RR and the RockyMounts MonoRail #RKY10007 are quite similar. The HighNoon is essentially the newer version of the same RockyMounts bike rack. We started selling the…

view full answer...

Answer 4

It seems like your Trek 3 is about 50 lbs without the battery. Always haul without your battery loaded. You can use the RockyMounts MonoRail Solo 1 #RKY10007 as it has 60 lbs per bike and does not have any frame contact. This is nice because it is…

view full answer...

Answer 5

All Thule bike racks use the same threaded hitch pin so you can use the Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device #853-5917. This is just the threaded bolt, and you'll need to use the flat washer, lock washer…

view full answer...

Answer 6

I believe you're looking for a more secure hitch pin solution, in which I have just what you need! Check out the etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush #e98882 This is a locking hitch pin that will lock through your hitch…

view full answer...

Answer 7

The Thule Vertex 2 Bike Rack TH9028XT is a nice bike rack. Unfortunately each manufacturer has a different threaded hitch pin to use as a lock and anti-rattle device for their bike racks and unfortunately they are not compatible with each other. Each…

view full answer...

Answer 8

There is not a replacement lock cylinder for your Rola threaded hitch pin #59915. Since you stated it is a 12mm hitch pin bolt, you may consider the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks #S64029 which is 12 UNC coarse…

view full answer...

Answer 9

Since the Rola Cargo Carrier 59502 includes a 5/8"-11 hitch pin, I confirmed with my tech at Rola that the only confirmed locking hitch pin that is compatible is the HitchMate Threaded Trailer Hitch Receiver Lock for 2" Hitches #HE6001.…

view full answer...

Answer 10

I compared the dimensions of the pin you provided, and we don't sell a lock housing individually that would work with it. Your best bet would be to buy a locking pin/lock housing combo like #HE6001. I've provided a diagram of the pin…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement for Rola Convoy 1-Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching