Trailer Axle Option For M416 Trailer With & Without Electric Brakes
Updated 07/27/2022 | Published 07/25/2022
Products Featured in This Question
Question:
I am trying to get a new axle for me M416 trailer. Want to run a simple 5 lug rim. Not sure if I want to run electric brakes or not. What axles would work best if I run with or without electric brakes. Manual says the current axle is 58.75 inchs
asked by: Mike A
Expert Reply:
The only option for an axle for your M416 trailer is what is called an axle-less system, as there aren't axles in that particular length. You can get these with either idler hubs (for without electric brakes) or hub and drums if you choose to use electric brakes. They are available in either a straight spindle or with a 4 inch lift if you want to add some extra height:
- Timbren Axle-Less Trailer Suspension System - 2,000 lbs # ASR2000S02
- Timbren Axle-Less Trailer Suspension - 4" Lift Spindle - 2,000 lbs # ASR2KHDS04
The Timbren Axle-Less system is an upgrade relative to a traditional through-axle. They give you a better ride because the Timbrens have progressive springs built in which absorbs shock, and aren't connected by an axle beam, so they work independently; that means if there is a bump on one side of the road it won't rattle your entire trailer.
Then for the hub, the correct fit will depend on if you want electric brakes or not; both the Timbren systems come with a brake flange if you want to use brakes, but you don't have to. Here are the options:
- Dexter Trailer Idler Hub Assembly # 84545UC1-EZ
or
- Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ
Then for brakes you would need the Electric Trailer Brake Kit # AKEBRK-35-SA and Mounting Hardware # BRKH10B.
Product Page this Question was Asked From
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- ABS Fasteners
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: 2025 Toyota Sienna Wiring Needed for the Tekonsha Prodigy RF Brake Controller
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Brakes, Hub/Drums, Bearings, And Seals For A Lippert 3,500lb Axle
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Torque Spec for Tightening Trailer Brake Assemblies to Trailer Spindle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: My Surge Brakes Are Activating When I Back Up My Trailer - What Can I Do?
- Q&A: Demco vs. etrailer Hydraulic Dacromet 3,500 lb Trailer Brakes
- Article: Most Popular Wheel Bearings
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Bleed Your Trailer Surge Brakes