Comparing Single and Dual Servo Hydraulic Drum Trailer Brakes
Updated 02/09/2022 | Published 02/08/2022 >
Question:
What is the difference between regular uni servo and uniservo free backing?
asked by: Mike H
Expert Reply:
The only difference between single and dual servo hydraulic drum brakes is that dual servo will provide more force while in reverse than single servo. That said, it's not much and most really don't use their brakes a ton in reverse so single servo like the Hydraulic Trailer Brake Kit part # AKFBBRK-35 are far more common.
I have attached a list of our hydraulic brakes below, if you need help picking out a set I would just need your axle capacity.
Product Page this Question was Asked From
Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 12" - Left Hand - 5,200 lbs
- Shop: Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 12" - Right Hand - 5,200 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 12" - Left/Right - 5.2K
- Shop: Dexter Hydraulic Trailer Brakes - Duo Servo - 12" - Left/Right - 7K
- Video: A Closer Look at the Dexter Hydraulic Drum Brake Kit
- Shop: Dexter Hydraulic Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 6,000 lbs
- Shop: Dexter Hydraulic Trailer Brakes - Free Backing - 12" - Left/Right - 7K
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Q&A: What is the Bolt Spacing for etrailer Hydraulic 10 Inch Trailer Brake Kit # AKFBBRK-35
- Search Results: trailer brakes
- Search Results: akfbbrk~35
- Shop: Brake Controller
- Q&A: Replacement 10" Drum Hydraulic Trailer Brakes for Converting 3,500 lbs Axles to Hydraulic Brakes
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement Inner Member for Old A-60 on 2004 Trailer
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: What Surge Brake Actuator do I Need for My A-60 with Drum Brakes in Fulton Fold Away Tongue?
- Q&A: How Do I Know If I Have Free-Backing Brakes?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Lighting Requirements
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer

