Replacement Jack for Snap Ring Mount on Triton TR196 Bass Boat Trailer
Products Featured in This Question
Question:
I have a 2006 Triton TR196 bass boat trailer. I need a replacement jack. The OD of the snap ring tube welded to the trailer is 2.37. Do you have a replacement jack for this? Thanks for your reply.
asked by: Rick D
Expert Reply:
The inside diameter of the snap ring is the crucial measurement. If your existing snap ring has a 2-5/16 (2.3125) inch inside diameter which is typical for a snap ring jack, the Fulton # F1410050149 snap ring swivel jack you'd looked at would work perfectly for you. The jack has a 400 lb capacity, so you'll want to make sure that the trailer's tongue weight doesn't exceed the capacity of the jack.
For a higher capacity, the Fulton # FTJ120W0301 has a 1200 lb capacity. This jack is also compatible with a 2-5/16 ID snap ring.
I've linked to demonstration videos for the jacks mentioned above.

Product Page this Question was Asked From
Fulton Boat Trailer Jack Stand w/ Wheel - Swivel - Silver - 400 lbs
- Trailer Jack
- Boat Trailer
- Utility Trailer
- Side-Mount Jacks
- Swivel Jacks
- Marine Grade
- 0 - 1000 lbs
- Manual Jack
- 15 Inch Lift
- Bolt-On
- With Wheel
- Fulton
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Shop: Fulton Boat Trailer Jack Stand w/ Wheel - Swivel - Silver - 400 lbs
- Shop: Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1,000 lbs
- Video: Complete Breakdown of the Fulton Boat Trailer Jack w/ Wheel
- Video: In-Depth Review of the Fulton Boat Trailer Jack w/ Wheel
- Shop: Replacement Rack Clamp Knob for Thule Xsporter Pro Ladder Rack
- Shop: Replacement M8 T-Bolt for Thule TracRac and Xsporter Ladder Racks
- Q&A: Jack Recommendation for a Triton Boat Trailer
- Article: How to Raise Your Travel Trailer Height
- Search Results: tandem axle kits
- Shop: Bulldog Bolt-Thru Swivel Trailer Jack - Bolt On - Sidewind - 10" Lift - 1,500 lbs - Gray
- Q&A: Replacement Side-Frame-Mount Wheeled Jack for Triton Boat Trailer
- Article: Double-Eye Trailer Suspension System Review
- Video: Review of the Replacement Wet Shoulder Bolt
- Q&A: Wet Suspension Bolt vs a Regular Suspension Bolt
- Shop: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Video: Checking Out the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs
- Q&A: Comparing Lippert Never-Fail Bushings to the Bronze Bushings and Wet Bolt Option for Tandem Axles
- Q&A: How to Determine Correct Replacement Wet Bolts and Shackle Straps for Trailer
- Q&A: Do Suspension Hangers Need to Welded on Or Can They be Bolted On
- Q&A: What Torque Should My Suspension Components Be Tightened To?
- Video: Set up: Dexter E-Z Flex Suspension Kit on a 2020 Grand Design Reflection 150 Series Fifth Wheel