Will Thule Hullavator Fit RSI SmartCap Load Bars

Question

Question:

Will the Thule hullavator 898 mount correctly on RSI SmartCap Evo load bars? The SmartCap is on a Toyota Tacoma 2021 with a 5 ft bed.

asked by: Cynthia

1

Helpful Expert Reply:

Yes, your RSI SmartCap load bars are compatible with, and will allow you to mount the Hullavator, which is the following part number:

- Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898

I have added a link below to a video review for you to check out as well if you'd like to take a look.

expert reply by: Kyle S

1

Answer 1

Since we don't currently offer the RSI Smartcap I don't have any real technical info on it, but since you say they have t-slots you could use a system like the Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-140B-NT. This rack attaches…

view full answer...

Answer 2

The only ski and snowboard carrier confirmed to fit your Yakima Ridgeback 4 Bike Rack #Y02458 is the Yakima HitchSki #Y02418. I went out to our shop to test the Thule Tram with the Yakima Ridgeback for you and found that the two are not compatible.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hello Edward, Great choice on the Timbrens for the rear. Since all of your weight is in the rear of the truck I do not think that it is necessary to put them on the front, even with hauling a 7,000 pound trailer. All of the focus is on the tongue…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Donald! I'm assuming you're saying you have the deck rail system on your 2024 Tundra. Is that correct? Assuming it is, and you have the 5-1/2' bed, the Access Vanish Soft, Roll-Up Tonneau Cover #A28GW you looked at is the right one to…

view full answer...

Answer 7

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Hey Jerry, you would not need to use any additional spacers with the Timbren kit part #T45MR that fits your 2024 Toyota Tundra SR5. Since your truck is all stock and this kit was designed to fit your vehicle no additional spacers would be required.

view full answer...

Answer 10

We do have parts available for the 2024 Toyota Tundra 4WD models so we can definitely set you up. For an air bag kit I recommend the Air Lift #AL84JQ. These are the 5,000 lb capacity air bags. They will help level your ride and improve overall…

view full answer...

Answer 11

First we have the Timbren Active Off-Road Bumpstops #T83MR for your 2022 Toyota Tundra. These bump stops allow for the most suspension travel while still absorbing road shock to improve your suspension comfort off road. The Timbren Suspension…

view full answer...

Answer 12

Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars #Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers #Y33TR and the HD Bar Adapter #Y03541 to complete this…

view full answer...

Will Thule Hullavator Fit RSI SmartCap Load Bars

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching