Solera RV Slide-Out Awning Measurements for 2019 keystone outback 335CG

Updated 07/22/2021 | Published 07/20/2021

Products Featured in This Question

Solera RV Slide-Out Awning - 61" Wide - Black

(1252)

$391.10

Solera RV Slide-Out Awning - 79" Wide - Black

(1253)

$349.11

Solera RV Slide-Out Awning - 157" Wide - Black

(1253)

$607.87

Question:

I have a 2019 keystone outback 335cg. Im wanting the lippert Solara toppers in black. I have 3 slides but am finding mix reviews on how to measure for the awning I need. The slides measurements flange to flange are 59 inches, 154 inches, and 79 inches. How big of an overlap on the sides can I go? None of the slides are by the ends of the camper so I want as much overhang as I can get that still will bolt up to the slide. Thanks for any help you can give.

asked by: Daniel B

Expert Reply:

It is not an exact science that must be followed, so no worries. The amount of overhang can vary to a degree and still be just fine. Sometimes there will be an obstacle in play that determines limitations as well, adjoining slides so limited mounting space. Best practice is to measure between the outside edges of both Slide-Out flanges and order the slide topper size that allows for total fabric coverage over the Slide-Out box (the fabric itself will measure 5” shorter than the complete awning width). You can have greater than 2-1/2" overhang left/right if you prefer.

Since you have done so with resulting measurement of 59", 154", and 79" I suggest the following:

Solera RV Slide-Out Awning - 5'1" Wide - 48" Projection - Black, # LCV000168104 for your 59" Slide-Out.

Solera RV Slide-Out Awning - 5'1" Wide - 48" Projection - Black, # LCV000168105 for your 79" Slide-Out

Solera RV Slide-Out Awning - 5'1" Wide - 48" Projection - Black, # LCV000168109 for your 154" Slide-Out