Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
Updated 06/22/2021 | Published 06/21/2021
Question:
What is the distance from the outboard end to the flange and what is the bolt pattern of the flange? Will this fit a 10inch rotor? Thanks
asked by: Chris B
Expert Reply:
The #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR you were looking at has a 4 bolt mounting flange that has holes 2-7/8" apart on center, and from the outside edge of the flange to the end of the spindle is 3-1/4" as shown in the included diagram.
This spindle will work perfectly with a 10" rotor.
I included a video of the # TRU74FR for you to take a look at.
(click to enlarge)
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: Brake Assembly Bolt Hole Measurements for Attaching to Brake Flange
- Search Results: akhd~545~35~ez~k
- Search Results: dexter trailer brake shoes
- Search Results: trailer electric brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Brake Mounting Flange for 2-3/8" Round Axle
- Article: Overview of Lubricating Grease
- Search Results: model 60
- Search Results: spindle
- Q&A: Replacement Idler Hubs For a 1990's Calkins Boat Trailer With 45264 Idler Hubs
- Video: Checking Out the Kodiak Hydraulic Brake Line Kit
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Q&A: Parts Needed to Convert Trailer to Surge Disc with Welded on Atwood Actuator and 3,500 lb Axles
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Video: Review of Titan Brake Actuator - T4820000
- Video: Replacement Shock Absorber for Dexter Model 60 Brake Actuators Spec Review
- Q&A: Replacement Disc Brake Actuator for Titan Model 60
- Q&A: Bearing Grease Compatible With CE Smith Prepacked Hub Kits
- Q&A: Are There Bearing Buddy Bearing Protector Grease Caps Compatible with Harbor Freight Utility Trailer
- Search Results: grease gun
- Search Results: brake line kit
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: Detailed Breakdown of the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout