Replacement Shock Absorber for Dexter Model 60 Brake Actuators Spec Review Video

Thank you for the kind words, Lonner! The Demco Hydraulic Brake Actuator w/ Electric Lockout #DM62VR is designed for disc brakes which require a higher psi rating than drum brakes do so you'll want to use one rated for drum brakes like the Dexter…

It looks like that is a piece of flexible brake line you are using. You would need standard flexible brake line with a 3/8 inch male fitting. We offer them in varying lengths. A 13 inch long brake line with fittings (male on one end, female on the…

The UFP 34044 is basically the Dexter DX7.5L A-60 part #DX89FR. The second number you mentioned is actually a phone number. But the #DX89FR would be an exact replacement for what you have.

Since your current Atwood surge drum actuator is welded to your trailer frame what you'll need to do is take the trailer to a welder who can cut the welds and remove what you have now and in place install a weld on coupler designed for disc…

It does not come with instructions but it is pretty easy to replace. For your Titan Aero 6000 the correct replacement master cylinder is item #T4395100. This is the replacement master cylinder that works with drum brakes. I was able to find an…

Surge brakes use a hydraulic actuator to push fluid to the cylinder piston to activate the brake shoes on drum brakes or brake pads on disc brakes. This pressure should only be applied when weight is pushing against the hitch ball, so no pressure…

Is your trailer sitting as level as possible? Sounds like it could be sitting possibly nose high and combined maybe with a bit of play in the ball mount is creating the slamming you are experiencing. It's also possible your surge actuator has a…

I really wish there was a cheap and easy way to lock out a Titan model 60 actuator but the only way would be with an electric lock out like the part #T4748800. This threads onto the back of your current actuator and once ran to the reverse light…

The Grease Cap Plug for E-Z Lube Grease Caps #RG04-010 will replace your missing rubber cap on your Dexter E-Z lube axle hub.

The Grease Cap Plug for the E-Z Lube Grease Caps, #RG04-010, has a measurement of 1.18 inches. I checked a few other references and could not find any measurement other than the 1.18 inches for the size of the rubber plugs.

It sounds like the shock is worn out in your coupler and it is no longer functioning as a dampener to allow the coupler to return slowly and that is the clanking sound you are hearing. I attached a page that shows all of the different actuator shocks…

It sounds like the shock absorber might be the issue here. The shock absorber, like part #T2336200 for Dexter Model 60 Brake Actuators, is designed to "push" the actuator back into a naturally opened position but it sounds like your coupler…