Recommendation to Replace a Better Built Tilt Trailer Axle
Updated 06/09/2021 | Published 06/07/2021 >
Products Featured in This Question
Question:
I am trying to confirm if this axle will fit our Better Built Tilt Deck Trailer. The measurements are correct via length and leaf spring perch but the bearing numbers that I currently have a different then what is stated in the comments. They are aftermarket bearings also Inner- 7800026 Outer- 7800017. I contacted Better Built Trailers directly but they unfortunately where not able to help.
asked by: Brandon C
Expert Reply:
It took a little researching, but I was able to confirm the 7800026 is another number for # 25580 and 7800017 is another number for # 14125A. So with that being said, the Dexter # 8327872 will definitely be a good replacement for your axle as everything will match what you currently have.

Product Page this Question was Asked From
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 78-1/4 Inch Spring Center
- 94 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Hydrastar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers
- Shop: Adapter Module for BrakeRite Electric Over Hydraulic Actuator - OE Ford, GM Brake Controllers
- Video: Hydrastar Brake Actuator HBA-CAM Review
- Video: HydraStar Electric Over Hydraulic Disc Brake Actuator Installation
- Q&A: Electric Over Hydraulic Adapter Module For a 2024 Chevrolet Silverado 2500HD
- Shop: Kodiak Ceramic Brake Pads - 7,000 lbs to 8,000 lbs
- Shop: DeeMaxx Kevlar Brake Pads with Steel Back Plates - 7,000 lbs to 8,000 lbs
- Shop: DeeMaxx Ceramic Brake Pads with Stainless Steel Back Plates - 7,000 lbs to 8,000 lbs
- Q&A: 7k Trailer Axle Needed With A 95" Hub Face And 80" Spring Center
- Q&A: What Does Hole In Rear Hanger For 2-1/2" Wide Hanger Used For?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: How to Determine if a Trailer Axle is Out of Alignment or Suspension is Worn
- Q&A: Dimensions of Curt Stud Mount Lunette Ring # C48530
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: Will the Advent Air Conditioner Work with my Coleman Wiring
- Article: Frequently Asked Questions About Transmission Coolers
- Article: How to Measure a Trailer Axle
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: How to Install E-Track in 3 Easy Steps