Recommended Air Helper Spring Kit For 2007 Ford F-250 W/ Gooseneck Hitch

Question:

I have a 2007 ford f250 with a below bed gooseneck. i believe its a Draw-Tite. Im wanting to install Air Lift bags. Which #/model will fit? What determines if I need the 5k or 7.5k? thanks for your time

asked by: Doug B

Expert Reply:

For your 2007 Ford F-250 with a gooseneck hitch I recommend the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2400 if your truck is 4WD, or the # F2398 if your truck is 2WD as they are the only option for your truck with an in-bed hitch.

These kits both have a 5000lb load leveling capacity which is the most common option as the only weight from a trailer that counts towards this is the tongue weight, and most people are not carrying 5000lbs in the bed of their truck.

These systems can be fine tuned to the exact support by adjusting the air pressure between 5-100 PSI.

To keep from needing to manually inflate the air bags when you are ready to tow I recommend adding an onboard air compressor like the Air Lift Load Controller I Compressor System for Air Helper Springs - Dual Path # AL25651 which will allow you to adjust the pressure in each air bag from the cab of your truck.

I included videos for each of the products mentioned for you to take a look at.

expert reply by: Samuel C