Recommended Trailer Jack For Trailer With 14000lb GVWR
Products Featured in This Question
Question:
I will have a trailer with gvw at 14,000. I am derating to 10,000lbs. The trailer weights about 3,300 lbs. When loaded the tongue weight will be ? not sure what, but sure you have an electric jack for me to put on this trailer. can you advise?
asked by: Michael W
Expert Reply:
Since you are limiting your trailer to 10000lbs, and the average tongue weight is 10-15% of the trailer weight, you are looking at 1000-1500lbs tongue weight. With that said it is a good idea to use a jack with a larger capacity as it will be able to work easier leading to a longer life of the jack.
I recommend the Electric Jack w/ Footplate and 7-Way Plug # EJ-3527-BBX which has a 3500lb capacity meaning it would be able to work fine even if you loaded the trailer to 14000lbs and had 1400-2100lbs tongue weight. The cool part about this jack is that it does not require a battery to be installed on the trailer as it plugs into the 7-way connector on your truck to power the jack.
The # EJ-3527-BBX is designed for a-frame trailers, has 25-1/8" of lift with the drop leg, and emergency crank should you need it.
If you would prefer a jack that requires a trailer battery, I recommend taking a look at the # EJ-3520-BBX as it is the same as the # EJ-3527-BBX with the only difference being it needs to be hooked to a battery on your trailer.
I included a video of the # EJ-6527-BBX for you to take a look at.

Product Page this Question was Asked From
Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jacks
- Steel
- 3001 - 4000 lbs
- Electric Jack
- 25-1/8 Inch Lift
- Bolt-On
- 1 Jack
- RAM
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Shop: etrailer Square Jack - Foot Lever - Drop Leg - Spring Return - 12K Lift - 26-1/2" Travel
- Shop: Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black
- Shop: Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 28-3/4" Lift - 12K
- Search Results: trailer jack
- Shop: Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 12,500 lbs
- Shop: Go Power Overlander Expansion Kit - 200 Watt Solar Panel
- Shop: Curt Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K
- Search Results: oil bath cap
- Video: All About the Square Direct Weld Jack
- Search Results: 13520
- Search Results: mj~1500b~dwl
- Search Results: bp19005
- Search Results: air bags
- Search Results: go power expansion
- Video: Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever Review
- Video: An In-Depth Look at the Square Direct Weld Jack
- Q&A: How to Run an Electric Jack Off of a Trailer Battery and a 7-Way Connector
- Q&A: Replacement Converter Recommendation For An American/Centurion CS6000 Converter
- Q&A: Replacement Wheel Stud For AxleTek BD2-655 Drum
- Q&A: Bolt Torque Specification for Mounting a 12 Inch Brake Assembly
- Q&A: How Much Torque is Required for the Dexter Hydraulic Drum Brake Hit # 23-406-407 Mounting Bolts?
- Q&A: Parts Needed to Add Electric Brakes to Trailer With 12,000 Pound Air Brakes
- Video: Comprehensive Review: Ultimate Trailer Jack
- Video: Beginner’s Guide to Installing the Dexter Trailer Axle w/ Electric Brakes
- Video: All About the Bulldog Powered Drive Trailer Jack
- Video: All About the Demco Trailer Coupler