How To Choose Correct Replacement Hubs for 2005 Wesco Boat Trailer
Updated 06/01/2020 | Published 05/28/2020
Question:
I have a 2005 Wesco boat trailer with a 2005 16 ft carolina skiff 1655 . I need to replace the hubs on a single axle trailer. The GAWR is 1560 lbs. What do you recommend?
asked by: Lawrence P
Expert Reply:
In order to choose the correct replacement hubs for a trailer you'll need to know the axle capacity. The make and model of the trailer is usually irreverent as we don't have any way to look up part numbers from this. The axle capacity can be found on the axle tube itself. The smaller trailers with an axle capacity of 2,000 lbs use the Trailer Idler Hub Assembly part # AKIHUB-545-2-G-1K which has L44643 bearings.
I have attached a full list of trailer hub options which you will need to filter based on axle capacity if the above is not a match. Please note, you must also pay attention to the bolt pattern as well.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer brakes
- Search Results: brake actuator
- Search Results: carpeted bunk boards
- Search Results: accessories and parts
- Q&A: Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
- Search Results: l44649
- Search Results: buddy bearing
- Search Results: hub assembly
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Caliber Bunk Wrap Endcaps for 2x4 Boat Trailer Guides - Light Gray - Qty 24
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Dexter Hydraulic Brake Lines and Fittings for Tandem-Axle, Torsion-Axle Trailers
- Shop: Americana Trailer Wheel Lug Nut - Chrome Plated - 1/2"-20
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Can a Load Range C Tire Be Replaced with a Load Range D Tire
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Video: What to Know About the Loadstar K399 Bias Trailer Tire
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Review of the Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Video: Hands-On with the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles
- Q&A: How to Pick Out Replacement Bearings/Races for a Wesco Boat Trailer
- Q&A: How to Determine Trailer Axle Rating from Axle Diameter and Bearings Used in Hubs
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Video: What to Know About the Powerbuilt Deluxe Bearing Packer
- Video: Easy Grease Trailer Idler Hub Assembly for 2K Axles Review